Mercury Elite Pro 2000VA UPS

Name: Mercury Elite Pro 2000VA UPS
SKU: 22412
Availability: InStock

Add to wishlist

₦185,000.00

(0 reviews)

27 people are viewing this right now

20 in stock

Estimated Delivery:

15 - 22 Jan, 2026

Guaranteed safe & secure checkout

Product details

MERCURY Line Interactive UPS (2000VA) – Elite 2000 ProWide input voltage rangeCompatible with generatorsOverload protectionShort circuit protectionBuilt-in AVRBattery deep discharge protection & overcharge protectionRating input voltage: 2000 VA / 1200 WRating input frequency: 60/50Hz (auto sensing)Input phase: Single phaseInput socket: With FuseCold Start (0 to 100% load): Press the ON/OFF SwitchInput Range (220V): 140-300Rating output (VA): 2000Rating output (W): 1200Power factor: 0.6Rating output voltage (V): 220Waveform: Battery mode (simulated sine wave), AC mode (sine wave)AC Voltage Regulation: ±10% (Battery mode)Rear output socket: 4 x Universal – Battery backupWaveform: Simulated Sine Wave (Battery mode)Line Mode: Synchronize with the utilityRating frequency: 60Hz or 50 Hz ± 1 HzBattery Mode: Yellow flashingShort circuit protection Line Mode: Fuse & Firmware protectionShort circuit protection Battery Mode: Firmware ProtectionOverload protection Line Mode: 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately.Overload protection Battery Mode: 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediatelyIndicators AC mode: Green LightingIndicators Battery Mode: Yellow FlashingIndicators Fault: Red LightingAlarm Battery Mode: Sounding every 10 SecondsAlarm Low Battery: Sounding every SecondAlarm Overload: Sounding every 0.5 secondAlarm Fault: Continuously soundingFull Protection: Overload, discharge, and Overcharge protectionTransfer Time: Typical 2-6ms, 10ms max.Transfer Time: Typical 2-6ms, 10ms max.Communication Interface: Optional RS232/RJ11Battery and runtime rating: 2 X 12V/9AHRecharge time – Typical: 6-8 hours recover to 90% capacityCharge current: About 1A at normal mode

Mercury Elite 2000 Pro Line Interactive UPS provides a relatively robust capacity for power backup to meet office as well as domestic power backup demands. With the Mercury Elite 2000 you not only get power backup for your equipment but also enjoy solid protection for those appliances. The built-in AVR function of the Elite 2000 Pro means dangerous power fluctuations won’t easily make mincemeat of your equipment.

Quick Comparison

Mercury Elite Pro 2000VA UPS remove APC EASY UPS BV 800VA remove Mercury Maverick 850VA UPS remove APC EASY UPS BV 1000VA remove PRAG 200KVA 3-Phase Servo Voltage Stabilizer (304-456V) remove Mercury 15KVA AVR, 1 Phase, Servo Type Stabilizer remove

Name Mercury Elite Pro 2000VA UPS remove APC EASY UPS BV 800VA remove Mercury Maverick 850VA UPS remove APC EASY UPS BV 1000VA remove PRAG 200KVA 3-Phase Servo Voltage Stabilizer (304-456V) remove Mercury 15KVA AVR, 1 Phase, Servo Type Stabilizer remove

Image

SKU

Rating

Price

₦185,000.00

Save 6%

Save 7%

Save 8%

₦9,950,000.00

₦770,000.00

Stock

20 in stock

Availability 20 in stock 20 in stock 20 in stock 20 in stock

Add to cart

Description

Rating input voltage 2000 VA / 1200 W Rating input frequency 60/50Hz (auto sensing) Input phase Single phase Input socket With Fuse Rating output voltage (V) 220 Waveform Battery mode (simulated sine wave), AC Voltage Regulation ±10% (Battery mode) Rear output socket 4 x Universal - Battery backup Waveform Simulated Sine Wave (Battery mode) Line Mode Synchronize with the utility Rating frequency 60Hz or 50 Hz ± 1 Hz Battery Mode Yellow flashing Short circuit protection Line Mode Fuse & Firmware protection Short circuit protection Battery Mode Firmware Protection Overload protection Line Mode 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. Indicators AC mode Green Lighting Indicators Battery Mode Yellow Flashing Indicators Fault Red Lighting Alarm Battery Mode Sounding every 10 Seconds Alarm Low Battery Sounding every Second Alarm Overload Sounding every 0.5 second Alarm Fault Continuously sounding Full Protection Overload, discharge, and Overcharge protection Communication Interface Optional RS232/RJ11

Output power capacity 450 Watts / 800VA Output Connections (4) Universal receptacle (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections BS1363A British Cord Length 1.5meters

Frequent power interruptions can lead to stress and delays in meeting project deadlines while working on your computer. The Mercury Maverick 850VA line interactive UPS provides a reliable power back up that enables you save your work the moment there is power interruption or public power outage. It has a wide voltage input range of 140~300VAC with a transfer time of 2 – 6ms and is compatible with generators and the erratic public power supply. Features • Built in AVR with wide input range of 140~300VAC • Auto restart • Output short circuit protection • Overload protection • Overcharge protection • Sleek and compact design with cpu control • Green function ( No load cut off ) Country wide maintenance and service centres available Input Voltage 220VAC Input Frequency 50Hz Input Phase Single Input Socket With Fuse Input Range (220v) 140V – 300VAC Rating Output 850VA/510V Battery Type 12V/9AH x1 Dimension(mm) 283 x 101 x 140 Weight (Kg) 4.4

Output Power capacity:600 watts/1.0 KVA
Maximum Configurable Power (Watts):600 Watts/1.0KVA
Nominal Output Voltage:230V
Topology: Line Interactive
Waveform Type: Stepped Approximation to a Sine wave
Transfer Time:6 minutes:10 minutes maximum
Cord Length:1.52 Meters
Number of cords:1
Input Connections’ -320 C14
Battery Type: Maintenance -free sealed Lead-Acid battery with suspended electrolyte: leak proof

Input Voltage: AC 175V-265V / 304V-456V
Output Voltage: AC 380V ± 3%, suitable for both 50Hz and 60Hz operations
Delay Time: Quick response with a short delay of 3-5 seconds
Comprehensive Protection: Equipped with safeguards against over voltage, overload, high temperature, and short circuits
Dimensions: Packing size of 95 cm x 72 cm x 159 cm facilitates easy transport.
Weight: Weighing 562 kg (gross), this regulator is built to last.

Power: 15KVA
Technology: Relay Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 220V ± 10%
Phase: Single

Content

MERCURY Line Interactive UPS (2000VA) - Elite 2000 ProWide input voltage rangeCompatible with generatorsOverload protectionShort circuit protectionBuilt-in AVRBattery deep discharge protection & overcharge protectionRating input voltage: 2000 VA / 1200 WRating input frequency: 60/50Hz (auto sensing)Input phase: Single phaseInput socket: With FuseCold Start (0 to 100% load): Press the ON/OFF SwitchInput Range (220V): 140-300Rating output (VA): 2000Rating output (W): 1200Power factor: 0.6Rating output voltage (V): 220Waveform: Battery mode (simulated sine wave), AC mode (sine wave)AC Voltage Regulation: ±10% (Battery mode)Rear output socket: 4 x Universal - Battery backupWaveform: Simulated Sine Wave (Battery mode)Line Mode: Synchronize with the utilityRating frequency: 60Hz or 50 Hz ± 1 HzBattery Mode: Yellow flashingShort circuit protection Line Mode: Fuse & Firmware protectionShort circuit protection Battery Mode: Firmware ProtectionOverload protection Line Mode: 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately.Overload protection Battery Mode: 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediatelyIndicators AC mode: Green LightingIndicators Battery Mode: Yellow FlashingIndicators Fault: Red LightingAlarm Battery Mode: Sounding every 10 SecondsAlarm Low Battery: Sounding every SecondAlarm Overload: Sounding every 0.5 secondAlarm Fault: Continuously soundingFull Protection: Overload, discharge, and Overcharge protectionTransfer Time: Typical 2-6ms, 10ms max.Transfer Time: Typical 2-6ms, 10ms max.Communication Interface: Optional RS232/RJ11Battery and runtime rating: 2 X 12V/9AHRecharge time – Typical: 6-8 hours recover to 90% capacityCharge current: About 1A at normal mode Mercury Elite 2000 Pro Line Interactive UPS provides a relatively robust capacity for power backup to meet office as well as domestic power backup demands. With the Mercury Elite 2000 you not only get power backup for your equipment but also enjoy solid protection for those appliances. The built-in AVR function of the Elite 2000 Pro means dangerous power fluctuations won't easily make mincemeat of your equipment.

APC EASY UPS BV 800VA, AVR, Universal Outlet, 230VBest Value UPS with Battery Backup & Surge Protection for Electronics and Computers Includes: User Manual Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Allow flexibility for setup in tight locations and mounting on wall or other surfaces. Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations. Maximizes battery performance, life, and reliability through intelligent, precision charging. Provides temporary battery power when the utility power is out. Protect equipment with input transformer blocks without blocking access to other receptacles. Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery. Back up and protect your hardware and data during power outages, surges and spikes. Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. Provides notification of changing utility power and UPS power conditions Provide easy-to-read status of the unit and utility power conditions. Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Output power capacity 450 Watts / 800VA Output Connections (4) Universal receptacle (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections BS1363A British Cord Length 1.5meters APC EASY UPS BV 800VA, AVR, Universal Outlet, 230V Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments. Includes: User manual

" alt="Mercury Maverick 850VA UPS" width="500" height="500" data-src="https://www.digitaldirectng.com/wp-content/uploads/2023/04/Mercury-Maverick-850VA-UPS.jpg" />

Mercury Maverick 850VA UPS

(Frequent power interruptions can lead to stress and delays in meeting project deadlines while working on your computer. The Mercury Maverick 850VA line interactive UPS provides a reliable power back up that enables you save your work the moment there is power interruption or public power outage. It has a wide voltage input range of 140~300VAC with a transfer time of 2 – 6ms and is compatible with generators and the erratic public power supply. Features • Built in AVR with wide input range of 140~300VAC • Auto restart • Output short circuit protection • Overload protection • Overcharge protection • Sleek and compact design with cpu control • Green function ( No load cut off ) Country wide maintenance and service centres available Input Voltage 220VAC Input Frequency 50Hz Input Phase Single Input Socket With Fuse Input Range (220v) 140V – 300VAC Rating Output 850VA/510V Battery Type 12V/9AH x1 Dimension(mm) 283 x 101 x 140 Weight (Kg) 4.4

Infomation

Cutaway collar Front button fastening Chest patch pocket Long sleeves

Composition

Cotton 100%

Wearing

Model is 1.84 m wearing size M

Washing Instructions

" alt="washing-instruction" width="183" height="36" data-src="https://www.digitaldirectng.com/wp-content/uploads/2021/12/washing-instruction.png" /> Machine wash, no ironing, don’t dry clean, don’t tumble dry

Best Value UPS with Battery Backup and Surge Protection for Electronics and Computers Automatic voltage regulation: Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Wall-mount holes: Allow flexibility for set up in tight locations and mount on walls or other surfaces Battery and Surge Protected Outlets: Back up and protect your hardware and data during power outages, Surges, and Spikes. Battery backup and Surge Protection: Outlets provides abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. Audible Alarms: Provides notification of changing utility power and UPS power conditions SLEEK DESIGN: Slim, modern design can be upright, flat or wall-mounted to comfortably fit any electronic set-up and complement Home decor. Transformer-block spaced outlets: Protect equipment with input transformer blocks without blocking access to other receptacles. Cold-start capable: Provides temporary battery power when the utility power is out. Boost Automatic Voltage Regulations (AVR): Preserves battery life and maximizes run time by correcting low voltages without discharging the batteries. Battery failure notification: Provides early-warning fault analysis on battery enabling timely preventive maintenance. Advanced Safety Features: Safeguards your Home UPS from overloads, excessive mains voltage, short circuits, installation mishaps and battery damage due to low voltage situations

The 200KVA 3-Phase Servo Voltage Regulator is a high-precision, cabinet-type voltage regulator designed to maintain stable voltage levels in a variety of demanding environments. This advanced regulator features an LCD digital display for easy monitoring and is built with a compensated structure for reliable voltage regulation. With a robust power capacity of 200000VA, it is engineered to handle substantial loads while delivering high-precision output.

Applications:

The 200KVA Servo Voltage Regulator is ideal for various industries, including:

Industrial and Mining Enterprises: Ensures stable voltage for machinery and operations
Printing and Machine Tools: Supports sensitive equipment requiring precise voltage levels
Telecommunications and Railways: Provides reliable power to critical communication systems
Construction Sites and Schools: Guarantees safe and stable voltage supply
Hospitals and Hotels: Essential for medical equipment and hospitality services
Defense and Scientific Research: Supports precision instruments and experimental devices
Elevators and Production Lines: Maintains operational efficiency and safety in automated systems

This 200KVA 3-Phase Servo Voltage Regulator is an essential solution for any application where voltage stability is critical. Its robust design and advanced features ensure that your equipment operates efficiently and reliably, minimizing downtime and enhancing productivity. Invest in power stability today and secure the longevity of your vital systems.

Description: Mercury Stabilizer 15KVA AVR|1 Phase Servo Type MER-ZTY15

Input voltage: 100V-255V AC
Power: 15KVA
Technology: Relay Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 220V ± 10%
Phase: Single

Compact Design – Sleek & handy Get the Mercury 15kVA AVR servo stabilizer for that all-important voltage protection to your equipment. With the Mercury 15kVA AVR, you can support heavy-duty equipment or a number of appliances at a stretch. Power fluctuations are common and for anyone using power generators (and who doesn’t?), the risk of voltage fluctuations is even higher. What you must know, also, is that voltage fluctuations can damage your important appliances, causing you financial loss. Automatic voltage regulators, AVR, provide the voltage stabilization that will protect your sensitive equipment. AVRs, commonly called stabilizers, are designed to stabilize the voltage. That not only helps your equipment to function optimally but protects them from damage. The AVR will take a wide input voltage range and output a regulated voltage range that is safe for your equipment. Having an AVR that delivers the expected result is a different matter, though. All AVRs are not made equal. And you need an AVR that does an effective job of providing the voltage stabilization that is imperative to keep your valued equipment safe.

That is where Mercury brand AVRs come in. Mercury AVRs are built to high standards and offer efficient voltage regulation function. With Mercury AVR, you get the result that you expect, with your equipment enjoying that all-important protection from voltage-induced damage. These Mercury AVRs also deliver the durability users expect, serving you for years on end. This is a quality stabilizer, suitable for home appliances and office equipment

Weight 3 kg 6 kg 10 kg 7 kg 562 kg 60 kg

Dimensions N/A N/A N/A N/A N/A N/A

Additional information

Weight	3 kg

Weight	6 kg

Weight	10 kg

Weight	7 kg

Weight	562 kg

Weight	60 kg

Sold 0 0 2 0 0 0

Shipping

Subtotal	₦0.00
Total	₦0.00