Mercury MH 3500VA Inverter, 48VDC, Pure Sinewave

Name: Mercury MH 3500VA Inverter, 48VDC, Pure Sinewave
Brand: Mercury
SKU: 22345
Availability: InStock

Add to wishlist

₦870,000.00

(0 reviews)

30 people are viewing this right now

20 in stock

Estimated Delivery:

07 - 14 Dec, 2025

Guaranteed safe & secure checkout

Product details

The Mercury 3.5KVA (M3500)Pure Sine Wave with UPS functionality is a generation ahead of the entire category. That’s because our breakthrough chip embedded sine wave’ technology delivers the same current as you get from your mains. The distinguishing features of this Mercury 3.5KVA inverter Pure Sine Wave are:

DSP technology for fast & smooth charging
Auto Sense intelligent charging (ASIC) adjustment
Highly robust & reliable ideal for computers
User selectable charging current
Wide charging voltage range
Low battery Warning
Overload warning
Main fuse blown protection
Short circuit protection

Specification

Mercury 3.5kva Inverter Specification

Voltage Range 180 VAC – 265VAC ± 5 VAC (UPS Mode)
100 VAC – 280 VAC ± 15 VAC (NOR Mode)
Line Low Detection 180V ± 5V (UPS Mode) / 100V ± 15V (NOR Mode)
Line Low Comeback 190V ± 5V (UPS Mode) / 110V ± 10V (NOR Mode)
Line Low Detection 265V ± 5V (UPS Mode) / 280V ± 15V (NOR Mode)
Line Low Comeback 255V ± 5V (UPS Mode) / 270V ± 10V (NOR Mode)
Frequency Transfer Input Frequency 45-55 Hz

Characteristics (AC)

Inverter Full Load Power 2800
Power Factor 0.8 factor (on resistive load)
On-Line Mode Sine Wave
Battery Mode Sine Wave
On-Line Output voltage Follow the Line Voltage
Battery Mode Output Voltage 200 VAC ± 10%
Transfer Time (No-Load) <15 ms
The frequency at Battery Mode 50 Hz ± 1 Hz

Characteristics (DC)

DC Supply Voltage 48V
Battery Floating Charge Voltage 54.0 VDC ± 0.8 VDC
Charge Current <15 A
Battery Voltage Low Alarm 42.4 VDC ± 0.8 VDC
Battery Discharge Protection 41.6 VDC ± 0.4 VDC
Over Charge Protection > 60.0 VDC ± 0.8 VDC

Quick Comparison

Mercury MH 3500VA Inverter, 48VDC, Pure Sinewave remove Mercury VM 2.4kva/24v Off Grid Hybrid Solar Inverter remove Mercury 11kva Off Grid Hybrid Solar Inverter 48v, MPPT remove Prag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT remove Mercury 3.5kva Off Grid Hybrid Solar Inverter 24v, MPPT remove Mercury 200AH, 12V GEL Inverter Battery remove

Name Mercury MH 3500VA Inverter, 48VDC, Pure Sinewave remove Mercury VM 2.4kva/24v Off Grid Hybrid Solar Inverter remove Mercury 11kva Off Grid Hybrid Solar Inverter 48v, MPPT remove Prag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT remove Mercury 3.5kva Off Grid Hybrid Solar Inverter 24v, MPPT remove Mercury 200AH, 12V GEL Inverter Battery remove

Image

SKU

Rating

Price

₦870,000.00

₦396,000.00

₦2,200,000.00

₦2,700,000.00

₦630,000.00

₦425,000.00

Stock

20 in stock

Availability 20 in stock 20 in stock 20 in stock

Add to cart

Description

Digital Display
Pure sine Wave
Inverter

2.4Kva Off Grid Hybrid Solar Inverter 24v
Pure Sinewave with MPPT Voltage range 120 ~ 430VCD
Max SCC 80A

The Off-Grid Hybrid Solar Inverter 11000 from Mercury – the ideal solution for off-grid solar energy systems. This advanced inverter offers 11000VA/11000W of power with a peak efficiency of 93%.

PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.

he Mercury 3.5KVA (M3500)Pure Sine Wave with UPS functionality is a generation ahead of the entire category. That’s because our breakthrough chip embedded sine wave’ technology delivers the same current as you get from your mains.

Digital Display
Pure sine Wave
Inverter

Mercury Gel 12V 200AH Deep Cycle
Low self-discharge
High impact resistive plastic cast
Compact design and heavy duty grids

Content

DSP technology for fast & smooth charging
Auto Sense intelligent charging (ASIC) adjustment
Highly robust & reliable ideal for computers
User selectable charging current
Wide charging voltage range
Low battery Warning
Overload warning
Main fuse blown protection
Short circuit protection

Specification Mercury 3.5kva Inverter Specification Voltage Range 180 VAC – 265VAC ± 5 VAC (UPS Mode) 100 VAC – 280 VAC ± 15 VAC (NOR Mode) Line Low Detection 180V ± 5V (UPS Mode) / 100V ± 15V (NOR Mode) Line Low Comeback 190V ± 5V (UPS Mode) / 110V ± 10V (NOR Mode) Line Low Detection 265V ± 5V (UPS Mode) / 280V ± 15V (NOR Mode) Line Low Comeback 255V ± 5V (UPS Mode) / 270V ± 10V (NOR Mode) Frequency Transfer Input Frequency 45-55 Hz Characteristics (AC) Inverter Full Load Power 2800 Power Factor 0.8 factor (on resistive load) On-Line Mode Sine Wave Battery Mode Sine Wave On-Line Output voltage Follow the Line Voltage Battery Mode Output Voltage 200 VAC ± 10% Transfer Time (No-Load) <15 ms The frequency at Battery Mode 50 Hz ± 1 Hz Characteristics (DC) DC Supply Voltage 48V Battery Floating Charge Voltage 54.0 VDC ± 0.8 VDC Charge Current <15 A Battery Voltage Low Alarm 42.4 VDC ± 0.8 VDC Battery Discharge Protection 41.6 VDC ± 0.4 VDC Over Charge Protection > 60.0 VDC ± 0.8 VDC

FEATURES

Pure sine wave inverter & ECO friendly
Configurable input voltage range for home appliances and personal computers.
Configurable battery charging current based on applications via LCD setting.
Configurable AC/Solar Charger priority.
Compatible to mains voltage or Generator power.
Auto restart while AC is recovering & Cold start function.
Overload/ Over temperature & Short circuit protection.
Smart battery charger design for optimized battery performance

Mercury 2.4kva Solar Hybrid Inverter Mode

Mercury 2.4kva Solar Hybrid Charging Mode

The Off-Grid Hybrid Solar Inverter 11000 from Mercury – the ideal solution for off-grid solar energy systems. This advanced inverter offers 11000VA/11000W of power with a peak efficiency of 93%.

Key Features:

Dual MPPT solar inputs with high 27A max PV input current to capture more solar energy from PV arrays up to 11000W. Wide 90-450VDC MPPT voltage range.
Pure sine wave AC output delivers clean, safe power to run sensitive equipment. Voltage regulation in battery mode keeps output steady.
Built-in Wi-Fi for remote monitoring via mobile app (Android/iOS). USB, RS232, RS485 ports allow communication with external devices like batteries.
Status LEDs clearly indicate system status. RGB lights show power source (solar, grid, battery) and battery charge/discharge condition.
Robust design with replaceable fan and anti-dust kit allows reliable operation in harsh environments.
Supports parallel operation to increase capacity up to 66,000W (up to 6 units).
Automatic transfer between solar, utility/generator and battery power ensures uninterrupted supply.

Ideal Uses:

Off-grid solar power systems for homes, businesses, outdoor sites
Backup power source during blackouts
Remote areas without grid access
Mobile installations like RVs, marine boats etc.

PRAG 10KVA 48V INVERTER W-EY (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today. PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame. PRAG 10KVA 48V INVERTER Features

Powerful Pure Sine Wave (PSW) Inverter/Charger
13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
High efficiency design and Power Saving Mode to conserve energy
8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
Battery DOD (Depth of Discharge) setting from 50%
Easy and straightforward installation
Designed to operate under harsh environment
DC Start and Automatic Self Diagnostic (ASD) function
Compatible with Linear and Non-Linear loads
Low DC Voltage home and office appliances support
Up to 120Amp charging current selectable from 0%-100%
Battery priority mode for preferred UPS configuration

Inverter Output
Model	PT-INV-10KVA/9000W 48V-Color LED, Wall-H
Continuous Output Power	9000W
Surge Rating(20s)	24000W
Capable of Starting Electric Motor	8HP
Output Waveform	Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency	>88%(Peak)
Line Mode Efficiency	>95%
Power Factor	0.9-1.0
Nominal Output Voltage rms	220-230-240Vac
Output Voltage Regulation	±10% RMS
Output Frequency	50± 0.3Hz/60± 0.3Hz
Short Circuit Protection	Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time	10ms(Max)
THD	< 10%
DC Input
Nominal Input Voltage	12.0Vdc
Nominal Input Voltage	( 2 for 24Vdc, 4 for 48Vdc)
Minimum Start Voltage	10.0Vdc/10.5Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Low Battery Alarm	10.5Vdc/11.0Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Low Battery Trip	10.0Vdc/10.5Vdc ( 2 for 24Vdc, 4 for 48Vdc)
High Voltage Alarm & Fault	16.0Vdc ( 2 for 24Vdc, 4 for 48Vdc)
High DC Input Recovery	15.5Vdc
Low Battery voltage recover	15.5Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Idle Consumption-Search Mode	< 25 W when Power Saver On
Charge
Input Voltage Range	Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC
Input Frequency Range	Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage	Depends on battery type
Charger Breaker Rating	40A
Max Charge Rate	50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown	15.7V for 12Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Charger curve(4 stage constant current) 4 step digital controlled progressive charge	Battery types ( 2 for 24Vdc, 4 for 48Vdc)
Battery type	Float Vdc
Gel U.S.A	13.7
A.G.M 1	13.4
A.G.M 2	13.7
Sealed Lead Acid	13.6
Gel Euro	13.8
Open Lead Acid	13.3
Calcium	13.6
De-sulphation	15.5 for 4hrs
Remote Control	Yes. Optional
Bypass & Protection
Input Voltage Waveform	Sine wave (Grid or Generator)
Nominal Voltage	220Vac
Low Voltage Trip	184V/140V±4%
Low Voltage re engage	194V/150V±4%
High Voltage Trip	253V/270V±4%
High Voltage re engage	243V/260V±4%
Max Input AC Voltage	280VAC
Nominal Input Frequency	50Hz or 60Hz (Auto detect)
Low Freq Trip	Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage	Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip	Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage	Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection	Circuit breaker
Bypass breaker rating	63A
Transfer switch rating	80amp for UL
Max bypass current	80amp
Mechanical Specification
Mounting	Wall mount
Inverter Dimensions(LWH)	588415200mm
Inverter Weight	66KG
Shipping Dimensions(LWH)	750x520x310mm
Shipping Weight	68KG
Display	Status LEDs / Status LEDs+LCD
Standard Warranty	1 Year

DSP technology for fast & smooth charging
Auto Sense intelligent charging (ASIC) adjustment
Highly robust & reliable ideal for computers
User selectable charging current
Wide charging voltage range
Low battery Warning
Overload warning
Main fuse blown protection
Short circuit protection

This mercury 200AH Gel battery is a deep cycled sealed maintenance-free battery designed for inverters, telecommunication and other applications involving battery back-up need that involve continuous charging and discharging. To keep your inverter as well as business up and running‎,‎ you need the Mercury 200 AMP Battery to convert the direct current to alternating current which set the output voltage in 200 amp‎‎ that meets the specification of your household appliances‎‎‎.‎‎ Power is stored in this battery as it is designed to store rechargeable current and provides a flow of power to your inverter when there is no public power supply available‎‎‎.‎‎‎ This Mercury battery is 200AH 12V‎‎‎.‎‎‎ It is also a lead acid battery‎‎‎,‎‎‎ what this means is that it will use a reversible chemical reaction to store its energy‎‎‎.‎‎‎ It uses lead plates in a solution of sulphuric acid which generates electric energy‎‎‎.‎‎‎ This electric energy is then used to power the inverter‎‎ which offers you stable light to enjoy all through the day‎.‎‎‎ The Mercury battery is the best method to provide alternative power for a limited period‎‎ as it typically takes some hours to recharge‎‎‎.‎‎‎ Here are some of the reason why the battery is best for you‎‎‎;‎ it has a low maintenance cost and it is not expensive to buy‎‎ unlike running your home with a generator‎‎‎,‎‎‎ the inverter operation is so quiet‎‎ and‎ there will be no form of noise pollution‎‎‎.‎‎‎ Another important thing is that this battery has exceptional charge retention and recovering ability and also environmental friendly‎.‎‎‎ It has the ability to withstand overcharge‎,‎ discharge efficiently and‎‎ is not affected by shocks and vibration‎‎‎.‎‎‎ The battery can last for many years of continuous use before needing replacement‎‎‎‎ which‎‎ makes it a good choice as a back‎-up power provider‎‎‎.‎ Features:

Leak-proof and sealed construction
Maintenance free
Compact design and heavy duty grids
Low self discharge
Wide operating temperature
High impact resistive plastic cast
56.5kg weight
225mm x 523mm x 240mm volume

Weight 35 kg 5 kg N/A N/A N/A 56.5 kg

Dimensions N/A 348 × 270 × 95 cm N/A N/A N/A 225 × 523 × 240 cm

Additional information

Weight	35 kg

Weight	5 kg
Dimensions	348 × 270 × 95 cm

Weight	56.5 kg
Dimensions	225 × 523 × 240 cm

Sold 0 0 0 0 0 0

Shipping

Subtotal	₦0.00
Total	₦0.00

Mercury MH 3500VA Inverter, 48VDC, Pure Sinewave

Product details

Shipping and Returns

Mercury

Rating & Review

Question & Answer

Quick Comparison

FEATURES

Mercury Radiant 2.4Kva/1.44Kw 24VDC, Transformerless, Modified Sinewave Inverter

iPower 200Ah/12V Slim Inverter Battery

Prag 4kva 24v Pure Sine Wave Inverter – Wall Mount

iPowerplus 200Ah/12V Inverter Battery

iPowerplus 5KVA/48V Inverter

Mercury MH 3500VA Inverter, 48VDC, Pure Sinewave

Product details

Shipping and Returns

Mercury

Rating & Review

Question & Answer

Quick Comparison

FEATURES

Related products

Mercury Radiant 2.4Kva/1.44Kw 24VDC, Transformerless, Modified Sinewave Inverter

iPower 200Ah/12V Slim Inverter Battery

Prag 4kva 24v Pure Sine Wave Inverter – Wall Mount

iPowerplus 200Ah/12V Inverter Battery

iPowerplus 5KVA/48V Inverter

Shopping Cart