APC EASY UPS BV 800VA

Product details
APC EASY UPS BV 800VA, AVR, Universal Outlet, 230VBest Value UPS with Battery Backup & Surge Protection for Electronics and Computers Includes: User Manual Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Allow flexibility for setup in tight locations and mounting on wall or other surfaces. Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations. Maximizes battery performance, life, and reliability through intelligent, precision charging. Provides temporary battery power when the utility power is out. Protect equipment with input transformer blocks without blocking access to other receptacles. Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery. Back up and protect your hardware and data during power outages, surges and spikes. Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. Provides notification of changing utility power and UPS power conditions Provide easy-to-read status of the unit and utility power conditions. Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Output power capacity
450 Watts / 800VA
Output Connections
(4) Universal receptacle (Battery Backup)
Nominal Output Voltage
230V
Nominal Input Voltage
230V
Input Connections
BS1363A British
Cord Length
1.5meters
APC EASY UPS BV 800VA, AVR, Universal Outlet, 230V
Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.
Includes: User manual
Shipping and Returns
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.
There are no question found.
Quick Comparison
APC EASY UPS BV 800VA remove | Mercury Elite Pro 2000VA UPS remove | Mercury 30kVA 3-Phase Servo Stabilizer remove | Mercury 20KVA AVR 1-P Servo Type Stabilizer remove | Mercury 5KVA AVR Digital Stabilizer remove | Vertiv Liebert itON 1500VA E 230V IEC-IEC UPS remove | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | APC EASY UPS BV 800VA remove | Mercury Elite Pro 2000VA UPS remove | Mercury 30kVA 3-Phase Servo Stabilizer remove | Mercury 20KVA AVR 1-P Servo Type Stabilizer remove | Mercury 5KVA AVR Digital Stabilizer remove | Vertiv Liebert itON 1500VA E 230V IEC-IEC UPS remove | ||||||||||||
Image | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ||||||||||||
SKU | ||||||||||||||||||
Rating | ||||||||||||||||||
Price | Original price was: ₦132,000.00.₦120,000.00Current price is: ₦120,000.00. Save 9% | ₦200,000.00 | ₦1,600,000.00 | ₦870,000.00 | ₦112,000.00 | ₦148,000.00 | ||||||||||||
Stock |
20 in stock
|
20 in stock
|
20 in stock
|
20 in stock
|
Out of stock
| |||||||||||||
Availability | 20 in stock | 20 in stock | 20 in stock | 20 in stock | Out of stock | |||||||||||||
Add to cart | ||||||||||||||||||
Description | Output power capacity 450 Watts / 800VA Output Connections (4) Universal receptacle (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections BS1363A British Cord Length 1.5meters | Rating input voltage   2000 VA / 1200 W Rating input frequency   60/50Hz (auto sensing) Input phase   Single phase Input socket   With Fuse Rating output voltage (V)   220 Waveform   Battery mode (simulated sine wave), AC Voltage Regulation   ±10% (Battery mode) Rear output socket   4 x Universal - Battery backup Waveform   Simulated Sine Wave (Battery mode) Line Mode   Synchronize with the utility Rating frequency   60Hz or 50 Hz ± 1 Hz Battery Mode   Yellow flashing Short circuit protection Line Mode   Fuse & Firmware protection Short circuit protection Battery Mode   Firmware Protection Overload protection Line Mode   110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. Indicators AC mode   Green Lighting Indicators Battery Mode   Yellow Flashing Indicators Fault   Red Lighting Alarm Battery Mode   Sounding every 10 Seconds Alarm Low Battery   Sounding every Second Alarm Overload   Sounding every 0.5 second Alarm Fault   Continuously sounding Full Protection   Overload, discharge, and Overcharge protection Communication Interface   Optional RS232/RJ11 | Mercury 30kVA 3-Phase Servo Stabilizer Mercury 30KVA high precision 3 phase In 3 phase out Servo Automatic Voltage Stabilizer 277V-433V designed to automatically stabilizes voltage output current using auto-transformer, servo motor and an automatic control circuit. | Phase: Single Phase Output Voltage: Over-voltage Protection; Low-voltage Protection Display Model: LED / METER Wide Input Voltage Range 6 Steps Transformer Design In Voltage Stabilizing – For that extra reliability Voltage Protection – High / Low Voltage, High-Temperature Protection Soft Start Protection – Safeguards your expensive equipment Ideal for Heavy Duty Equipment | Mercury 5Kva AVR Digital Display Stabilizer
|
| ||||||||||||
Content | APC EASY UPS BV 800VA, AVR, Universal Outlet, 230VBest Value UPS with Battery Backup & Surge Protection for Electronics and Computers Includes: User Manual Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Allow flexibility for setup in tight locations and mounting on wall or other surfaces. Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations. Maximizes battery performance, life, and reliability through intelligent, precision charging. Provides temporary battery power when the utility power is out. Protect equipment with input transformer blocks without blocking access to other receptacles. Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery. Back up and protect your hardware and data during power outages, surges and spikes. Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. Provides notification of changing utility power and UPS power conditions Provide easy-to-read status of the unit and utility power conditions. Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Output power capacity 450 Watts / 800VA Output Connections (4) Universal receptacle (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections BS1363A British Cord Length 1.5meters APC EASY UPS BV 800VA, AVR, Universal Outlet, 230V Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments. Includes: User manual | MERCURY Line Interactive UPS (2000VA) - Elite 2000 ProWide input voltage rangeCompatible with generatorsOverload protectionShort circuit protectionBuilt-in AVRBattery deep discharge protection & overcharge protectionRating input voltage: 2000 VA / 1200 WRating input frequency: 60/50Hz (auto sensing)Input phase: Single phaseInput socket: With FuseCold Start (0 to 100% load): Press the ON/OFF SwitchInput Range (220V): 140-300Rating output (VA): 2000Rating output (W): 1200Power factor: 0.6Rating output voltage (V): 220Waveform: Battery mode (simulated sine wave), AC mode (sine wave)AC Voltage Regulation: ±10% (Battery mode)Rear output socket: 4 x Universal - Battery backupWaveform: Simulated Sine Wave (Battery mode)Line Mode: Synchronize with the utilityRating frequency: 60Hz or 50 Hz ± 1 HzBattery Mode: Yellow flashingShort circuit protection Line Mode: Fuse & Firmware protectionShort circuit protection Battery Mode: Firmware ProtectionOverload protection Line Mode: 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately.Overload protection Battery Mode: 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediatelyIndicators AC mode: Green LightingIndicators Battery Mode: Yellow FlashingIndicators Fault: Red LightingAlarm Battery Mode: Sounding every 10 SecondsAlarm Low Battery: Sounding every SecondAlarm Overload: Sounding every 0.5 secondAlarm Fault: Continuously soundingFull Protection: Overload, discharge, and Overcharge protectionTransfer Time: Typical 2-6ms, 10ms max.Transfer Time: Typical 2-6ms, 10ms max.Communication Interface: Optional RS232/RJ11Battery and runtime rating: 2 X 12V/9AHRecharge time – Typical: 6-8 hours recover to 90% capacityCharge current: About 1A at normal mode Mercury Elite 2000 Pro Line Interactive UPS provides a relatively robust capacity for power backup to meet office as well as domestic power backup demands. With the Mercury Elite 2000 you not only get power backup for your equipment but also enjoy solid protection for those appliances. The built-in AVR function of the Elite 2000 Pro means dangerous power fluctuations won't easily make mincemeat of your equipment. | Mercury 30kVA 3-Phase Servo Stabilizer Mercury 30KVA high precision 3 phase In 3 phase out Servo Automatic Voltage Stabilizer 277V-433V designed to automatically stabilizes voltage output current using auto-transformer, servo motor and an automatic control circuit. Highly adaptable to all kinds of non-linear loads such as capacitive and inductive loads. Low, High, Fluctuating NEPA Voltage? when NEPA voltage is unstable the Mercury Servo Stabilizer stands between NEPA and your precious electrical appliances stabilizing and protecting: Air Conditioners, Servers, Desktop Computers, Elevators, Lifts, Medical Equipment, Fridges, Freezers, Washing Machine, Microwave, Pumping Machine etc. Key Features Phase: Three Phase + N + GNaD Display Model: LED Ring transformer structure, small footprint, minimum magnetic leakage, low noise Multi-layer structure carbon brush with long service time and convenient daily maintenance Voltage Protection – High / Low Voltage, High-Temperature Protection Soft Start Protection – Safeguards your expensive equipment Ideal for Heavy-duty Equipment Specifications Capacity 30 KVA AC INPUT Voltage range 277 V ~ 433 V Frequency range 50/60 Hz Phase Three phase+ N + G AC OUTPUT Voltage: 380 V / 400 V / 415 V Voltage: regulation accuracy  ± 3% Waveform: Sinusoidal Efficiency: 96% Power factor: 0.8 Distortion: No additional waveform distortion | High precision auto voltage regulator power supply mainly consists of contact auto-transformer, servomotor, and an automatic control circuit. When grid voltage Is unstable or the load varies, the automatic control circuit drives the servo motor in compliance with a variety of output voltage, adjust carbon brush position on the contact auto-transformer. makes output voltage adjusted to be rated value and reaches a steady state. ZTY series products Introduce advanced technology, adopt energy-saving ring transformer and use Integrated circuit and high-quality components, which gives them a small footprint~ lightweight, high-efficiency, and energy-saving, no additional distortion of the output waveform, stable performance, and reliability. Mercury Stabilizer 20KVA Servo AVR Single Phase – Key Features: Phase: Single Phase Output Voltage: Over-voltage Protection; Low-voltage Protection Display Model: LED / METER Wide Input Voltage Range 6 Steps Transformer Design In Voltage Stabilizing – For that extra reliability Voltage Protection – High / Low Voltage, High-Temperature Protection Soft Start Protection – Safeguards your expensive equipment Ideal for Heavy Duty Equipment | DescriptionMercury 5000VA Stabilizer A5000DProtect your precious appliances from damage. The Mercury 5000VA Automatic Voltage Regulator AVR Stabilizer A5000D monitors all incoming electricity and regulates voltage fluctuations.  Automatically steps up low voltage and stepping down high voltage to levels that are safe for your connected appliances.  Key Features
SpecificationsPower Factor 0.6~0.8INPUT Normal Voltage 220/230Vac Regulation Voltage 100~260Vac Frequency 50/60HzOUTPUTOutput Voltage 220V/23OV 18% (when input with Regulation Voltage range) Hi Cut Voltage 260:5VAC Low Cut Voltage 100 +/-5V Frequency 50/60Hz Auto Sense Safety Cycle 6seconds/1803econds selectable Regulation % i8% Number of Taps 5/7 taps Transformer Type El lamited Transformer Control Type Relay typeINDICATORWorking Green LED lighting Fault/Protection Red LED lighting Delaying Yellow LED lighting Voltage Meter 2 Analog Voltage Meters PROTECTION Breaker/Fuse 32A Over Current Yes, Auto Shut Down Short Circuit Yes, Auto Shut Down Dimension (mm) 307x21 Ox270mm Net Weight(Kgs) 15.2PhysicalDisplay Analogue Meter Dimention (WxHxD) 310 x 210 x 285mm Net weight (KG) 15.2Kg Delaying power supply to outlet 6S / 1808 Noise Less than 35dB Cooling mode Natural air cooling | The Liebert itON 1500 VA is a reliable line interactive ups designed to protect desktops and standalone computing equipment. The Liebert itON comes with an automatic voltage regulator (AVR) to provide flexibility and reliability to computers and other sensitive electronic equipment. With its compact design and easy –to use controls, the Liebert itON offer sufficient autonomy to safely back up current tasks before shutting down the system.
LI32141CT21 is ideally suited for the following equipment:
| ||||||||||||
Weight | 6 kg | 3 kg | N/A | 75 kg | 15.2 kg | 5 kg | ||||||||||||
Dimensions | N/A | N/A | N/A | N/A | 310 × 210 × 285 cm | N/A | ||||||||||||
Additional information |
|
|
|
|
| |||||||||||||
Sold | 0 | 0 | 0 | 0 | 0 | 0 | ||||||||||||
Shipping |
Rating & Review
There are no reviews yet.