APC SMARTCONNECT-UPS 900WATTS/1500VA
Description
Cold start capable: Provides temporary battery power when the utility power is out
Green Mode: patent pending operating mode that bypasses unused electrical components in good power condition to achieve very high operating efficiency without sacrificing any protection
High Online efficiency: Reduces utility costs, generates less heat
LCD Status Display: Provides key UPS status at a glance.
Pure Sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics
Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature
Network Manageable: Provides Remote power management of the UPS over the network
Disconnected Battery Notification: warns when a battery is not available to provide backup power
Serial and USB Connectivity: provides management of the UPS via a serial port and USB port
Audible Alarm: Actively lets you know if the unit is on battery if the battery is low, or if there is an overload condition
LED Status Indicators: Quickly understands unit and power status with visual indicators
Battery failure Notification: Provides early-warning analysis on batteryPredictive failure NotificationAdjustable voltage transfer point
Adjustable voltage sensitivity
Safety Agency Approved
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.
There are no question found.
Quick Comparison
Settings | APC SMARTCONNECT-UPS 900WATTS/1500VA remove | APC EASY UPS SMV 1400WATTS/2000VA remove | Mercury Maverick UPS - 1050VA remove | Mercury 5KVA AVR Digital Stabilizer remove | Mercury Elite Pro 2000VA UPS remove | Mercury Elite Pro 3000VA UPS remove | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Image | ||||||||||||||||||||
SKU | ||||||||||||||||||||
Rating | ||||||||||||||||||||
Price | ₦835,000.00 | ₦603,000.00 | ₦53,500.00 | ₦109,000.00 | ₦138,000.00 | ₦255,000.00 | ||||||||||||||
Stock |
20 in stock
|
Out of stock
|
20 in stock
|
20 in stock
|
20 in stock
| |||||||||||||||
Description |
|
| Specification:  Model: - Capacity: 1050VA/630W  Input : - Voltage 220-240VAC - Voltage Range 140-300 VAC - Frequency: 50 / 60Hz - Current :4.8A Max Output: - Voltage Regulation (Bat.Mode): +/-10% - Frequency :50 / 60Hz - Waveform: Simulated Sine wave Battery: - Battery Type: 12V / 9AH x 1 - Charging ability: 6 hours recover to 90% capacity  Transfer Time: - Typical:2-6ms Protection : Short circuit, Overload, Battery discharge and overcharge, Surge Protection Indications: - Line Mode: Green lighting - Battery Mode :Yellow flashing - Fault: Red Lighting  Audible Alarm: - Battery Mode: Sounding every 10 sec - Battery low :Sounding every 1 sec - Overload : Sounding every 0.5 sec - Fault: Continuous sounding Environment: - Humidity 0-90% relative Humidity 0-40°C (Non-condensing) - Noise Level : Less than 40dB - Dimension: 283 X 101 X 140 | Mercury 5Kva AVR Digital Display Stabilizer
| Rating input voltage   2000 VA / 1200 W Rating input frequency   60/50Hz (auto sensing) Input phase   Single phase Input socket   With Fuse Rating output voltage (V)   220 Waveform   Battery mode (simulated sine wave), AC Voltage Regulation   ±10% (Battery mode) Rear output socket   4 x Universal - Battery backup Waveform   Simulated Sine Wave (Battery mode) Line Mode   Synchronize with the utility Rating frequency   60Hz or 50 Hz ± 1 Hz Battery Mode   Yellow flashing Short circuit protection Line Mode   Fuse & Firmware protection Short circuit protection Battery Mode   Firmware Protection Overload protection Line Mode   110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. Indicators AC mode   Green Lighting Indicators Battery Mode   Yellow Flashing Indicators Fault   Red Lighting Alarm Battery Mode   Sounding every 10 Seconds Alarm Low Battery   Sounding every Second Alarm Overload   Sounding every 0.5 second Alarm Fault   Continuously sounding Full Protection   Overload, discharge, and Overcharge protection Communication Interface   Optional RS232/RJ11 | Input voltage: 220VAC Input frequency: 50Hz Input phase: Single phase Input socket: With Fuse Cold Start (0 to 100% load): Press the ON/OFF switch Input range (220V): 140-300 Rating output (VA): 1200VA Rating output (W): 720W Waveform: Battery mode(simulated sine wave),AC mode(sine wave) Power factor: 0.6 Rating voltage: 220V Output range: 220Vac-7% to +15% in battery mode Rear Output Socket: 4 x Universal - Battery backup Transfer time: TYPICAL4-8ms Communication Interface: optional RS232/RJ11 Rating frequency: 50Hz Line-mode: Synchronize with the Utility | ||||||||||||||
Weight | 24 | 20 | 8.5 | 15.2 | 3 | 10 | ||||||||||||||
Dimensions | N/A | N/A | N/A | 310 × 210 × 285 cm | N/A | N/A | ||||||||||||||
Additional information |
|
|
|
|
|
| ||||||||||||||
Add to cart |
Rating & Review
There are no reviews yet.