Don’t miss out great discount.

Mercury MH 3500VA Inverter, 48VDC, Pure Sinewave

870,000.00
24 people are viewing this right now
20 in stock
Estimated Delivery:
15 - 22 Oct, 2025
Trust Badge
Guaranteed safe & secure checkout

Product details

The Mercury 3.5KVA (M3500)Pure Sine Wave with  UPS functionality is a generation ahead of the entire category. That’s because our breakthrough chip embedded sine wave’ technology delivers the same current as you get from your mains.  The distinguishing features of this Mercury 3.5KVA inverter Pure Sine Wave are:

  • DSP technology for fast & smooth charging
  • Auto Sense intelligent charging (ASIC) adjustment
  • Highly robust & reliable ideal for computers
  • User selectable charging current
  • Wide charging voltage range
  • Low battery Warning
  • Overload warning
  • Main fuse blown protection
  • Short circuit protection

Specification

Mercury 3.5kva Inverter Specification

Voltage Range 180 VAC – 265VAC ± 5 VAC (UPS Mode)
100 VAC – 280 VAC ± 15 VAC (NOR Mode)
Line Low Detection 180V ± 5V (UPS Mode) / 100V ± 15V (NOR Mode)
Line Low Comeback 190V ± 5V (UPS Mode) / 110V ± 10V (NOR Mode)
Line Low Detection 265V ± 5V (UPS Mode) / 280V ± 15V (NOR Mode)
Line Low Comeback 255V ± 5V (UPS Mode) / 270V ± 10V (NOR Mode)
Frequency Transfer Input Frequency 45-55 Hz

Characteristics (AC)

Inverter Full Load Power 2800
Power Factor 0.8 factor (on resistive load)
On-Line Mode Sine Wave
Battery Mode Sine Wave
On-Line Output voltage Follow the Line Voltage
Battery Mode Output Voltage 200 VAC ± 10%
Transfer Time (No-Load) <15 ms
The frequency at Battery Mode 50 Hz ± 1 Hz

Characteristics (DC)

DC Supply Voltage 48V
Battery Floating Charge Voltage 54.0 VDC ± 0.8 VDC
Charge Current <15 A
Battery Voltage Low Alarm 42.4 VDC ± 0.8 VDC
Battery Discharge Protection 41.6 VDC ± 0.4 VDC
Over Charge Protection > 60.0 VDC ± 0.8 VDC

 

Quick Comparison

Mercury MH 3500VA Inverter, 48VDC, Pure Sinewave removePrag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT removeMercury 11kva Off Grid Hybrid Solar Inverter 48v, MPPT removePrag 4kva 24v Pure Sine Wave Inverter - Wall Mount removeMercury 5.5kva Off Grid Hybrid Solar Inverter 24v, MTTP removeiPowerplus 200Ah/12V Inverter Battery remove
NameMercury MH 3500VA Inverter, 48VDC, Pure Sinewave removePrag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT removeMercury 11kva Off Grid Hybrid Solar Inverter 48v, MPPT removePrag 4kva 24v Pure Sine Wave Inverter - Wall Mount removeMercury 5.5kva Off Grid Hybrid Solar Inverter 24v, MTTP removeiPowerplus 200Ah/12V Inverter Battery remove
ImageMercury MH 3500VA Inverter, 48VDC, Pure SinewavePrag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VTMercury 11kva Off Grid Hybrid Solar Inverter 48v, MPPTPrag 4kva 24v Pure Sine Wave Inverter - Wall MountMercury 5.5kva Off Grid Hybrid Solar Inverter 24v, MTTPiPowerplus 200Ah/12V Inverter Battery
SKU
Rating
Price
870,000.00
2,700,000.00
2,200,000.00
965,000.00
855,000.00
370,000.00
Stock
20 in stock
20 in stock
Availability20 in stock20 in stock
Add to cart

Description
  • Digital Display
  • Pure sine Wave
  • Inverter
PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.The Off-Grid Hybrid Solar Inverter 11000 from Mercury – the ideal solution for off-grid solar energy systems. This advanced inverter offers 11000VA/11000W of power with a peak efficiency of 93%.PRAG H-Series Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak conversion efficiency of 88%. It is packed with unique features and it is one of the most advanced inverter/chargers in the market today. It features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment. PRAG H-Series Inverter is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.
  • Pure sine wave inverter & ECO friendly
  • Configurable input voltage range for home appliances and personal computers
  • Configurable battery charging current based on applications via LCD setting
  • Configurable AC/Solar Charger priority
  • Compatible to mains voltage or Generator power
  • Auto restart while AC is recovering & Cold start function
  • Overload/ Over temperature & Short circuit protection
  • Smart battery charger design for optimized battery performance
  • ON / OFF Bypass Switch
  • Minimum PV Voltage 170V, can work without battery.
200Ah/12V Inverter Battery
ContentThe Mercury 3.5KVA (M3500)Pure Sine Wave with  UPS functionality is a generation ahead of the entire category. That’s because our breakthrough chip embedded sine wave’ technology delivers the same current as you get from your mains.  The distinguishing features of this Mercury 3.5KVA inverter Pure Sine Wave are:
  • DSP technology for fast & smooth charging
  • Auto Sense intelligent charging (ASIC) adjustment
  • Highly robust & reliable ideal for computers
  • User selectable charging current
  • Wide charging voltage range
  • Low battery Warning
  • Overload warning
  • Main fuse blown protection
  • Short circuit protection
Specification Mercury 3.5kva Inverter Specification Voltage Range 180 VAC – 265VAC ± 5 VAC (UPS Mode) 100 VAC – 280 VAC ± 15 VAC (NOR Mode) Line Low Detection 180V ± 5V (UPS Mode) / 100V ± 15V (NOR Mode) Line Low Comeback 190V ± 5V (UPS Mode) / 110V ± 10V (NOR Mode) Line Low Detection 265V ± 5V (UPS Mode) / 280V ± 15V (NOR Mode) Line Low Comeback 255V ± 5V (UPS Mode) / 270V ± 10V (NOR Mode) Frequency Transfer Input Frequency 45-55 Hz Characteristics (AC) Inverter Full Load Power 2800 Power Factor 0.8 factor (on resistive load) On-Line Mode Sine Wave Battery Mode Sine Wave On-Line Output voltage Follow the Line Voltage Battery Mode Output Voltage 200 VAC ± 10% Transfer Time (No-Load) <15 ms The frequency at Battery Mode 50 Hz ± 1 Hz Characteristics (DC) DC Supply Voltage 48V Battery Floating Charge Voltage 54.0 VDC ± 0.8 VDC Charge Current <15 A Battery Voltage Low Alarm 42.4 VDC ± 0.8 VDC Battery Discharge Protection 41.6 VDC ± 0.4 VDC Over Charge Protection > 60.0 VDC ± 0.8 VDC  
PRAG 10KVA 48V INVERTER W-EY (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today. PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame. PRAG 10KVA 48V INVERTER Features
  • Powerful Pure Sine Wave (PSW) Inverter/Charger
  • 13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
  • High efficiency design and Power Saving Mode to conserve energy
  • 8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
  • 4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
  • 8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
  • 15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
  • Battery DOD (Depth of Discharge) setting from 50%
  • Easy and straightforward installation
  • Designed to operate under harsh environment
  • DC Start and Automatic Self Diagnostic (ASD) function
  • Compatible with Linear and Non-Linear loads
  • Low DC Voltage home and office appliances support
  • Up to 120Amp charging current selectable from 0%-100%
  • Battery priority mode for preferred UPS configuration
 
Inverter Output
Model PT-INV-10KVA/9000W 48V-Color LED, Wall-H
Continuous Output Power 9000W
Surge Rating(20s) 24000W
Capable of Starting Electric Motor 8HP
Output Waveform Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency >88%(Peak)
Line Mode Efficiency >95%
Power Factor 0.9-1.0
Nominal Output Voltage rms  220-230-240Vac
Output Voltage Regulation ±10% RMS
Output Frequency 50± 0.3Hz/60± 0.3Hz
Short Circuit Protection Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time 10ms(Max)
THD < 10%
DC Input
Nominal Input Voltage 12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Alarm 10.5Vdc/11.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Trip 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High Voltage Alarm & Fault 16.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High DC Input Recovery 15.5Vdc
Low Battery voltage recover 15.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Idle Consumption-Search Mode < 25 W when Power Saver On
Charge
Input Voltage Range Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC
Input Frequency Range Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage Depends on battery type
Charger Breaker Rating 40A
Max Charge Rate 50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current) 4 step digital controlled progressive charge Battery types ( *2 for 24Vdc, *4 for 48Vdc)
Battery type Float Vdc
Gel U.S.A 13.7
A.G.M 1 13.4
A.G.M 2 13.7
Sealed Lead Acid 13.6
Gel Euro 13.8
Open Lead Acid 13.3
Calcium 13.6
De-sulphation 15.5 for 4hrs
Remote Control Yes. Optional
Bypass & Protection
Input Voltage Waveform Sine wave (Grid or Generator)
Nominal Voltage 220Vac
Low Voltage Trip 184V/140V±4%
Low Voltage re engage 194V/150V±4%
High Voltage Trip 253V/270V±4%
High Voltage re engage 243V/260V±4%
Max Input AC Voltage 280VAC
Nominal Input Frequency 50Hz or 60Hz (Auto detect)
Low Freq Trip Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection Circuit breaker
Bypass breaker rating 63A
Transfer switch rating 80amp for UL
Max bypass current 80amp
Mechanical Specification
Mounting Wall mount
Inverter Dimensions(L*W*H) 588*415*200mm
Inverter Weight 66KG
Shipping Dimensions(L*W*H) 750x520x310mm
Shipping Weight 68KG
Display Status LEDs / Status LEDs+LCD
Standard Warranty 1 Year

The Off-Grid Hybrid Solar Inverter 11000 from Mercury – the ideal solution for off-grid solar energy systems. This advanced inverter offers 11000VA/11000W of power with a peak efficiency of 93%.

Key Features:

  • Dual MPPT solar inputs with high 27A max PV input current to capture more solar energy from PV arrays up to 11000W. Wide 90-450VDC MPPT voltage range.
  • Pure sine wave AC output delivers clean, safe power to run sensitive equipment. Voltage regulation in battery mode keeps output steady.
  • Built-in Wi-Fi for remote monitoring via mobile app (Android/iOS). USB, RS232, RS485 ports allow communication with external devices like batteries.
  • Status LEDs clearly indicate system status. RGB lights show power source (solar, grid, battery) and battery charge/discharge condition.
  • Robust design with replaceable fan and anti-dust kit allows reliable operation in harsh environments.
  • Supports parallel operation to increase capacity up to 66,000W (up to 6 units).
  • Automatic transfer between solar, utility/generator and battery power ensures uninterrupted supply.

Ideal Uses:

  • Off-grid solar power systems for homes, businesses, outdoor sites
  • Backup power source during blackouts
  • Remote areas without grid access
  • Mobile installations like RVs, marine boats etc.
4KVA-24V Pure Sine Wave Inverter - Wall Mount-H + AC/DC Cables PRAG H-Series Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak conversion efficiency of 88%. It is packed with unique features and it is one of the most advanced inverter/chargers in the market today. It features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment. PRAG H-Series Inverter is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer. Features
  • Easy to Install & Easy to Operate & Easy to Solve
  • Designed to Operate under Harsh Environment
  • DC Start & Automatic Self-Diagnostic Function
  • Powerful Charge Rate Up to 120Amp (depending on model), Selectable From 0%-100%
  • High Efficiency Design & “Power Saving Mode” to Conserve Energy
  • 8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Batteries
  • 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
  • 8 ms Typical Transfer Time Between Utility & Battery, Guarantees Power Continuity
  • 15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
  • Battery DOD(Depth of Discharge) setting from 50% to 100%.
  • SNMP remote monitoring (available as an option)
  • Pure sine wave inverter & ECO friendly
  • Configurable input voltage range for home appliances and personal computers
  • Configurable battery charging current based on applications via LCD setting
  • Configurable AC/Solar Charger priority
  • Compatible to mains voltage or Generator power
  • Auto restart while AC is recovering & Cold start function
  • Overload/ Over temperature & Short circuit protection
  • Smart battery charger design for optimized battery performance
  • ON / OFF Bypass Switch
  • Minimum PV Voltage 170V, can work without battery.
SPECIFICATIONS MODEL 3500 5500 LINE MODE Input Voltage Waveform: Sinusoidal (Utility or Generator) Nominal Input voltage: 230Vac Low Loss voltage: 170Vac±7V (UPS); 90Vac±7V (Appliances) Low Loss Return voltage: 180Vac±7V (UPS); 100Vac±7V (Appliances) High Loss Voltage: 280Vac±7V High Loss Return Voltage: 270Vac±7V Max AC Input Voltage 300Vac Nominal Input Frequency 50Hz / 60Hz (Auto detection) Low Loss Frequency 40±1Hz Low Loss Return Frequency 42±1Hz High Loss Frequency 65±1Hz High Loss Return Frequency 63±1Hz Output Short Circuit Protection: Circuit Breaker Efficiency (Line Mode):  >95% (Rated R load, battery full charged) Transfer Time 10ms typical (UPS) 20ms typical (Appliances) INVERTER MODE Rated Output Power 3.5KW 5.5KW Output Voltage Waveform: Pure Sine Wave Output Voltage Regulation: 230Vac±5% Output Frequency: 50Hz Peak Efficiency 93% Overload Protection: 5s@≥150% load; 10s@110%~150% load Surge Capacity:  2* rated power for 5 seconds AC Charging current Max: 60Amp (@VI/P=230Vac) Floating Charging Voltage: 54Vdc CHARGE MODE - MPPT SOLAR CHARGING MODE Max. PV Array Power: 5500W Nominal PV Voltage 240Vdc PV Array MMPT Voltage Range 120~450Vdc Max.PV Array Open Circuit Voltage 500Vdc Max Charging Current:  100Amp (AC charger plus solar charger) Dimension (D*W*H) / Net Weight 100 X 300 X 440mm / 9.7 Kgs Safety Certification CE Operating Temperature Range -10°C~ 50° C Storage temperature -15˚C~ 60˚C Humidity 5% to 95% Relative Humidity (Non-condensing)
Power is stored in an inverter's battery bank in the state a battery is designed to store DC power and that is what the inverter converts and provides in a form your home appliances can use (AC power), when there is no public power supply available. This iPowerPlus Inverter battery is 200AH 12V. iPowerPlus inverters, certified batteries and smart solar options are already enjoying rave reviews from thousands of patrons who have bought and installed them in their homes and offices, with many emphasizing that the solutions have helped cut their monthly energy costs while at the same time proving to be a more efficient alternative to the erratic supply from the national grid.
Weight35 kgN/AN/AN/AN/A50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 35 kg
Weight 50 kg
Sold000000
Shipping
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Add to cart
Click outside to hide the comparison bar
Compare