Don’t miss out great discount.

Prag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT

2,700,000.00
24 people are viewing this right now
Estimated Delivery:
22 - 29 Mar, 2025
Trust Badge
Guaranteed safe & secure checkout

Product details

PRAG 10KVA 48V INVERTER W-EY (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today.

PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.

PRAG 10KVA 48V INVERTER Features

  • Powerful Pure Sine Wave (PSW) Inverter/Charger
  • 13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
  • High efficiency design and Power Saving Mode to conserve energy
  • 8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
  • 4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
  • 8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
  • 15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
  • Battery DOD (Depth of Discharge) setting from 50%
  • Easy and straightforward installation
  • Designed to operate under harsh environment
  • DC Start and Automatic Self Diagnostic (ASD) function
  • Compatible with Linear and Non-Linear loads
  • Low DC Voltage home and office appliances support
  • Up to 120Amp charging current selectable from 0%-100%
  • Battery priority mode for preferred UPS configuration

 

Inverter Output
Model PT-INV-10KVA/9000W 48V-Color LED, Wall-H
Continuous Output Power 9000W
Surge Rating(20s) 24000W
Capable of Starting Electric Motor 8HP
Output Waveform Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency >88%(Peak)
Line Mode Efficiency >95%
Power Factor 0.9-1.0
Nominal Output Voltage rms  220-230-240Vac
Output Voltage Regulation ±10% RMS
Output Frequency 50± 0.3Hz/60± 0.3Hz
Short Circuit Protection Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time 10ms(Max)
THD < 10%
DC Input
Nominal Input Voltage 12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Alarm 10.5Vdc/11.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Trip 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High Voltage Alarm & Fault 16.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High DC Input Recovery 15.5Vdc
Low Battery voltage recover 15.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Idle Consumption-Search Mode < 25 W when Power Saver On
Charge
Input Voltage Range Wide: 90~135VAC / 164~243VAC
Narraw: 100~135VAC / 194~243VAC
Input Frequency Range Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage Depends on battery type
Charger Breaker Rating 40A
Max Charge Rate 50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current)
4 step digital controlled progressive charge
Battery types ( *2 for 24Vdc, *4 for 48Vdc)
Battery type Float Vdc
Gel U.S.A 13.7
A.G.M 1 13.4
A.G.M 2 13.7
Sealed Lead Acid 13.6
Gel Euro 13.8
Open Lead Acid 13.3
Calcium 13.6
De-sulphation 15.5 for 4hrs
Remote Control Yes. Optional
Bypass & Protection
Input Voltage Waveform Sine wave (Grid or Generator)
Nominal Voltage 220Vac
Low Voltage Trip 184V/140V±4%
Low Voltage re engage 194V/150V±4%
High Voltage Trip 253V/270V±4%
High Voltage re engage 243V/260V±4%
Max Input AC Voltage 280VAC
Nominal Input Frequency 50Hz or 60Hz (Auto detect)
Low Freq Trip Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz
Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz
Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz
Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz
Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection Circuit breaker
Bypass breaker rating 63A
Transfer switch rating 80amp for UL
Max bypass current 80amp
Mechanical Specification
Mounting Wall mount
Inverter Dimensions(L*W*H) 588*415*200mm
Inverter Weight 66KG
Shipping Dimensions(L*W*H) 750x520x310mm
Shipping Weight 68KG
Display Status LEDs / Status LEDs+LCD
Standard Warranty 1 Year

Quick Comparison

Prag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT removeMercury 8kva Off Grid Hybrid Solar Inverter 48v, MPPT removeiPowerplus 200Ah/12V Inverter Battery removeiPowerplus 3KVA/24V Inverter removeMercury Radiant 2.4Kva/1.44Kw 24VDC, Transformerless, Modified Sinewave Inverter removeMercury MH 3500VA Inverter, 48VDC, Pure Sinewave remove
NamePrag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT removeMercury 8kva Off Grid Hybrid Solar Inverter 48v, MPPT removeiPowerplus 200Ah/12V Inverter Battery removeiPowerplus 3KVA/24V Inverter removeMercury Radiant 2.4Kva/1.44Kw 24VDC, Transformerless, Modified Sinewave Inverter removeMercury MH 3500VA Inverter, 48VDC, Pure Sinewave remove
Image
SKU
Rating
Price
2,700,000.00
1,780,000.00
370,000.00
420,000.00
206,000.00
870,000.00
Stock
20 in stock
20 in stock
20 in stock
20 in stock
Availability20 in stock20 in stock20 in stock20 in stock
Add to cart

DescriptionPRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.
  • Pure sine wave ;AC output delivers clean, safe power to run sensitive equipment. Voltage regulation in battery mode keeps output steady.
  • Built-in Wi-Fi for remote monitoring via mobile app (Android/iOS). USB, RS232, and RS485 ports allow communication with external devices like batteries.
  • >;Status LEDs clearly indicate system status. RGB lights show the power source (solar, grid, battery) and battery charge/discharge condition.
  • A robust design with a replaceable fan and anti-dust kit allows reliable operation in harsh environments.
  • Supports parallel operation to increase capacity up to 66,000W (up to 6 units).
  • >;Automatic transfer between solar, utility/generator, and battery power ensures uninterrupted supply.
200Ah/12V Inverter Battery
  • Hybrid System
  • 3KVA
Mercury 2400VA (2.4KVA) Inverter with Digital Display Key Features Upgraded to Deliver more value Now with LCD display for status monitoring Built-in Charger (no external charge required) Super efficient DC-AC Conversion Input Voltage Range Selection Option Critical overload protection Automatic Switchover to Inverter Mode Battery Protection Up to 1440W rated capacity Compact, Light-weight Design
  • Digital Display
  • Pure sine Wave
  • Inverter
ContentPRAG 10KVA 48V INVERTER W-EY (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today. PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame. PRAG 10KVA 48V INVERTER Features
  • Powerful Pure Sine Wave (PSW) Inverter/Charger
  • 13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
  • High efficiency design and Power Saving Mode to conserve energy
  • 8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
  • 4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
  • 8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
  • 15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
  • Battery DOD (Depth of Discharge) setting from 50%
  • Easy and straightforward installation
  • Designed to operate under harsh environment
  • DC Start and Automatic Self Diagnostic (ASD) function
  • Compatible with Linear and Non-Linear loads
  • Low DC Voltage home and office appliances support
  • Up to 120Amp charging current selectable from 0%-100%
  • Battery priority mode for preferred UPS configuration
 
Inverter Output
Model PT-INV-10KVA/9000W 48V-Color LED, Wall-H
Continuous Output Power 9000W
Surge Rating(20s) 24000W
Capable of Starting Electric Motor 8HP
Output Waveform Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency >88%(Peak)
Line Mode Efficiency >95%
Power Factor 0.9-1.0
Nominal Output Voltage rms  220-230-240Vac
Output Voltage Regulation ±10% RMS
Output Frequency 50± 0.3Hz/60± 0.3Hz
Short Circuit Protection Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time 10ms(Max)
THD < 10%
DC Input
Nominal Input Voltage 12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Alarm 10.5Vdc/11.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Trip 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High Voltage Alarm & Fault 16.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High DC Input Recovery 15.5Vdc
Low Battery voltage recover 15.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Idle Consumption-Search Mode < 25 W when Power Saver On
Charge
Input Voltage Range Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC
Input Frequency Range Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage Depends on battery type
Charger Breaker Rating 40A
Max Charge Rate 50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current) 4 step digital controlled progressive charge Battery types ( *2 for 24Vdc, *4 for 48Vdc)
Battery type Float Vdc
Gel U.S.A 13.7
A.G.M 1 13.4
A.G.M 2 13.7
Sealed Lead Acid 13.6
Gel Euro 13.8
Open Lead Acid 13.3
Calcium 13.6
De-sulphation 15.5 for 4hrs
Remote Control Yes. Optional
Bypass & Protection
Input Voltage Waveform Sine wave (Grid or Generator)
Nominal Voltage 220Vac
Low Voltage Trip 184V/140V±4%
Low Voltage re engage 194V/150V±4%
High Voltage Trip 253V/270V±4%
High Voltage re engage 243V/260V±4%
Max Input AC Voltage 280VAC
Nominal Input Frequency 50Hz or 60Hz (Auto detect)
Low Freq Trip Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection Circuit breaker
Bypass breaker rating 63A
Transfer switch rating 80amp for UL
Max bypass current 80amp
Mechanical Specification
Mounting Wall mount
Inverter Dimensions(L*W*H) 588*415*200mm
Inverter Weight 66KG
Shipping Dimensions(L*W*H) 750x520x310mm
Shipping Weight 68KG
Display Status LEDs / Status LEDs+LCD
Standard Warranty 1 Year
  • Pure sine wave ;AC output delivers clean, safe power to run sensitive equipment. Voltage regulation in battery mode keeps output steady.
  • Built-in Wi-Fi for remote monitoring via mobile app (Android/iOS). USB, RS232, and RS485 ports allow communication with external devices like batteries.
  • >;Status LEDs clearly indicate system status. RGB lights show the power source (solar, grid, battery) and battery charge/discharge condition.
  • A robust design with a replaceable fan and anti-dust kit allows reliable operation in harsh environments.
  • Supports parallel operation to increase capacity up to 66,000W (up to 6 units).
  • >;Automatic transfer between solar, utility/generator, and battery power ensures uninterrupted supply.

SPECIFICATIONS

Mercury 8KVA Specification Mercury 8kva Solar Charger and AC Charger
Power is stored in an inverter's battery bank in the state a battery is designed to store DC power and that is what the inverter converts and provides in a form your home appliances can use (AC power), when there is no public power supply available. This iPowerPlus Inverter battery is 200AH 12V. iPowerPlus inverters, certified batteries and smart solar options are already enjoying rave reviews from thousands of patrons who have bought and installed them in their homes and offices, with many emphasizing that the solutions have helped cut their monthly energy costs while at the same time proving to be a more efficient alternative to the erratic supply from the national grid.The iPowerPlus 3KVA/24V runs on a pure sine wave technology. It is well shielded from short-circuits and overload complications with automated tripping off when the batteries get to the threshold. It is a hybrid system with an in-built solar charge controller that has a complementary in-built cooling system comprising of heat zinc and fans. Other features The iPowerPlus 3KVA/24V is compatible with both mains voltage and generator power. It interfaces with the utility electricity in the home to provide power through solar panels and seamlessly resolve any power interruptions that may occur. It includes other features such as:
  • A smart battery charger that optimizes battery performance
  • Selectable charging current depending on the applications
  • Selectable input voltage range
  • Configurable solar/AC input priority
  • Auto restart while AC recovers
  • A perfect alarming system
We must point out that the transition from mains to generator and vice versa is very seamless and usually occurs without you even noticing it except you are close by the inverter.
Introducing the Mercury 2.4KVA Modified Sine Wave Inverter with Inbuilt Charger, a power solution designed to provide you with uninterrupted electricity supply. This critically acclaimed inverter offers exceptional performance, reliability, and convenience, making it an essential addition to your home or office. Please note that this inverter requires two external 12v Deep Cycle Batteries, which are not included with the product. You can find suitable batteries on our website here. One of the standout features of the Mercury 2.4KVA Inverter is its automatic changeover capability, which seamlessly switches from the unreliable power supply from the utility grid to the inverter's power source. This ensures that you never experience interruptions or inconveniences due to power outages. Whether you're in the middle of an important task or simply enjoying your leisure time, this inverter, along with the required 12v Deep Cycle Batteries, has got you covered. Featuring a sleek, compact, and lightweight design, the Mercury 2.4KVA Inverter is easy to install and doesn't occupy much space. You can conveniently place it in any desired location without worrying about it being an eyesore or taking up valuable room. It blends seamlessly with your surroundings, allowing you to enjoy a clutter-free environment. Safety is a top priority, and this inverter is equipped with overload protection. This feature ensures that your connected devices and appliances are safeguarded against power surges or excessive load, preventing damage and extending their lifespan. With the Mercury 2.4KVA Inverter, you can have peace of mind knowing that your valuable electronics are protected. Keeping you informed about your power system's status is the digital LCD display on the inverter. This intuitive display provides real-time information on battery levels and load, allowing you to monitor the performance and make informed decisions. You'll always know when it's time to recharge the batteries or adjust the load to optimize efficiency. With the inbuilt 20a charger, the Mercury 2.4KVA Inverter is ready to power up your batteries whenever necessary. This convenient feature eliminates the need for an external charger, saving you both time and money. You can effortlessly keep your batteries charged and ready for use, ensuring continuous power availability. The Mercury 2.4KVA Modified Sine Wave Inverter with Inbuilt Charger is a reliable and versatile power solution that delivers uninterrupted electricity supply. Its automatic changeover, sleek design, overload protection, and digital LCD display make it a standout choice for anyone seeking a convenient and efficient backup power source. Remember to pair it with two 12v Deep Cycle Batteries for optimal performance. Invest in the Mercury 2.4KVA Inverter and enjoy the benefits of seamless power supply and peace of mind. The Mercury 3.5KVA (M3500)Pure Sine Wave with  UPS functionality is a generation ahead of the entire category. That’s because our breakthrough chip embedded sine wave’ technology delivers the same current as you get from your mains.  The distinguishing features of this Mercury 3.5KVA inverter Pure Sine Wave are:
  • DSP technology for fast & smooth charging
  • Auto Sense intelligent charging (ASIC) adjustment
  • Highly robust & reliable ideal for computers
  • User selectable charging current
  • Wide charging voltage range
  • Low battery Warning
  • Overload warning
  • Main fuse blown protection
  • Short circuit protection
Specification Mercury 3.5kva Inverter Specification Voltage Range 180 VAC – 265VAC ± 5 VAC (UPS Mode) 100 VAC – 280 VAC ± 15 VAC (NOR Mode) Line Low Detection 180V ± 5V (UPS Mode) / 100V ± 15V (NOR Mode) Line Low Comeback 190V ± 5V (UPS Mode) / 110V ± 10V (NOR Mode) Line Low Detection 265V ± 5V (UPS Mode) / 280V ± 15V (NOR Mode) Line Low Comeback 255V ± 5V (UPS Mode) / 270V ± 10V (NOR Mode) Frequency Transfer Input Frequency 45-55 Hz Characteristics (AC) Inverter Full Load Power 2800 Power Factor 0.8 factor (on resistive load) On-Line Mode Sine Wave Battery Mode Sine Wave On-Line Output voltage Follow the Line Voltage Battery Mode Output Voltage 200 VAC ± 10% Transfer Time (No-Load) <15 ms The frequency at Battery Mode 50 Hz ± 1 Hz Characteristics (DC) DC Supply Voltage 48V Battery Floating Charge Voltage 54.0 VDC ± 0.8 VDC Charge Current <15 A Battery Voltage Low Alarm 42.4 VDC ± 0.8 VDC Battery Discharge Protection 41.6 VDC ± 0.4 VDC Over Charge Protection > 60.0 VDC ± 0.8 VDC  
WeightN/AN/A50 kg10 kg6 kg35 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 50 kg
Weight 10 kg
Weight 6 kg
Weight 35 kg
Sold000000
Shipping
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Add to cart
Click outside to hide the comparison bar
Compare