-6%

Mercury Elite Pro 2000VA UPS

Add to wishlist

(0 reviews)

27 people are viewing this right now

20 in stock

Estimated Delivery:

15 - 22 Oct, 2026

Guaranteed safe & secure checkout

Product details

MERCURY Line Interactive UPS (2000VA) – Elite 2000 ProWide input voltage rangeCompatible with generatorsOverload protectionShort circuit protectionBuilt-in AVRBattery deep discharge protection & overcharge protectionRating input voltage: 2000 VA / 1200 WRating input frequency: 60/50Hz (auto sensing)Input phase: Single phaseInput socket: With FuseCold Start (0 to 100% load): Press the ON/OFF SwitchInput Range (220V): 140-300Rating output (VA): 2000Rating output (W): 1200Power factor: 0.6Rating output voltage (V): 220Waveform: Battery mode (simulated sine wave), AC mode (sine wave)AC Voltage Regulation: ±10% (Battery mode)Rear output socket: 4 x Universal – Battery backupWaveform: Simulated Sine Wave (Battery mode)Line Mode: Synchronize with the utilityRating frequency: 60Hz or 50 Hz ± 1 HzBattery Mode: Yellow flashingShort circuit protection Line Mode: Fuse & Firmware protectionShort circuit protection Battery Mode: Firmware ProtectionOverload protection Line Mode: 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately.Overload protection Battery Mode: 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediatelyIndicators AC mode: Green LightingIndicators Battery Mode: Yellow FlashingIndicators Fault: Red LightingAlarm Battery Mode: Sounding every 10 SecondsAlarm Low Battery: Sounding every SecondAlarm Overload: Sounding every 0.5 secondAlarm Fault: Continuously soundingFull Protection: Overload, discharge, and Overcharge protectionTransfer Time: Typical 2-6ms, 10ms max.Transfer Time: Typical 2-6ms, 10ms max.Communication Interface: Optional RS232/RJ11Battery and runtime rating: 2 X 12V/9AHRecharge time – Typical: 6-8 hours recover to 90% capacityCharge current: About 1A at normal mode

Mercury Elite 2000 Pro Line Interactive UPS provides a relatively robust capacity for power backup to meet office as well as domestic power backup demands. With the Mercury Elite 2000 you not only get power backup for your equipment but also enjoy solid protection for those appliances. The built-in AVR function of the Elite 2000 Pro means dangerous power fluctuations won’t easily make mincemeat of your equipment.

Quick Comparison

Mercury Elite Pro 2000VA UPS remove Mercury 15KVA AVR, 1 Phase, Servo Type Stabilizer remove Prag 15kva 45v-280v Relay Voltage Stabilizer remove Vertiv Liebert itON 2000VA UPS remove Mercury 10KVA AVR - 1 Phase - Servo Stabilizer remove APC EASY UPS BV 800VA remove

Name Mercury Elite Pro 2000VA UPS remove Mercury 15KVA AVR, 1 Phase, Servo Type Stabilizer remove Prag 15kva 45v-280v Relay Voltage Stabilizer remove Vertiv Liebert itON 2000VA UPS remove Mercury 10KVA AVR - 1 Phase - Servo Stabilizer remove APC EASY UPS BV 800VA remove

Image

SKU

Rating

Price

Save 6%

₦780,000.00

₦400,000.00

₦224,000.00

₦690,000.00

₦125,000.00

Stock

20 in stock

Out of stock

20 in stock

Availability 20 in stock 20 in stock 20 in stock Out of stock 20 in stock

Add to cart

Description

Rating input voltage 2000 VA / 1200 W Rating input frequency 60/50Hz (auto sensing) Input phase Single phase Input socket With Fuse Rating output voltage (V) 220 Waveform Battery mode (simulated sine wave), AC Voltage Regulation ±10% (Battery mode) Rear output socket 4 x Universal - Battery backup Waveform Simulated Sine Wave (Battery mode) Line Mode Synchronize with the utility Rating frequency 60Hz or 50 Hz ± 1 Hz Battery Mode Yellow flashing Short circuit protection Line Mode Fuse & Firmware protection Short circuit protection Battery Mode Firmware Protection Overload protection Line Mode 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. Indicators AC mode Green Lighting Indicators Battery Mode Yellow Flashing Indicators Fault Red Lighting Alarm Battery Mode Sounding every 10 Seconds Alarm Low Battery Sounding every Second Alarm Overload Sounding every 0.5 second Alarm Fault Continuously sounding Full Protection Overload, discharge, and Overcharge protection Communication Interface Optional RS232/RJ11

Power: 15KVA
Technology: Relay Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 220V ± 10%
Phase: Single

Prag 15kva, 45-280v

Automatic voltage regulator (AVR with boost and trim)
Compact size
Light weight
Easy operation
Overload protection and alarm
Auto re-start with AC recovery
Fast Charging
Cold start function

Mercury 10KVA AVR - 1 Phase - Servo Stabilizer (Input voltage: 100V-255V AC

Power: 10KVA
Technology: Relay Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 220V ± 10%
Phase: Single
Compact Design – Sleek & handy. Get the Mercury 10kVA AVR for that all-important voltage protection to your equipment. With the Mercury 10kVA AVR, you can support heavy-duty equipment or a number of appliances at a stretch.Power fluctuations are common and for anyone using power generators (and who doesn’t?), the risk of voltage fluctuations is even higher. What you must know, also, is that voltage fluctuations can damage your important appliances, causing you financial loss.Automatic voltage regulators, AVR, provide the voltage stabilization that will protect your sensitive equipment. AVRs, commonly called stabilizers, are designed to stabilize the voltage. That not only helps your equipment to function optimally but protects them from damage. The AVR will take a wide input voltage range and output a regulated voltage range that is safe for your equipment.Having an AVR that delivers the expected result is a different matter, though. All AVRs are not made equal. And you need an AVR that does an effective job of providing the voltage stabilization that is imperative to keep your valued equipment safe.

That is where Mercury brand AVRs come in. Mercury AVRs are built to high standards and offer efficient voltage regulation function. With Mercury AVR, you get the result that you expect, with your equipment enjoying that all-important protection from voltage-induced damage. These Mercury AVRs also deliver the durability users expect, serving you for years on end. This is a quality stabilizer, suitable for home appliances and office equipment FEATURES:

Small Footprint
Wide Application
High cost effective & High power density
Automatic Control Circuit
High Quality Components
Ring Transformer Structure
Minimum Magnetic Leakage
Convenient Daily Maintenance
Stable Performance and Reliability
No Additional Distortion of Output Waveform
High Precision Auto Voltage Regulator Power Supply
Multi-layer Structure Carbon Brush with Long Service Time
High Adaptability to all kinds of non linear loads such as Inductive load and Capacitive load

Output power capacity 450 Watts / 800VA Output Connections (4) Universal receptacle (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections BS1363A British Cord Length 1.5meters

Content

MERCURY Line Interactive UPS (2000VA) - Elite 2000 ProWide input voltage rangeCompatible with generatorsOverload protectionShort circuit protectionBuilt-in AVRBattery deep discharge protection & overcharge protectionRating input voltage: 2000 VA / 1200 WRating input frequency: 60/50Hz (auto sensing)Input phase: Single phaseInput socket: With FuseCold Start (0 to 100% load): Press the ON/OFF SwitchInput Range (220V): 140-300Rating output (VA): 2000Rating output (W): 1200Power factor: 0.6Rating output voltage (V): 220Waveform: Battery mode (simulated sine wave), AC mode (sine wave)AC Voltage Regulation: ±10% (Battery mode)Rear output socket: 4 x Universal - Battery backupWaveform: Simulated Sine Wave (Battery mode)Line Mode: Synchronize with the utilityRating frequency: 60Hz or 50 Hz ± 1 HzBattery Mode: Yellow flashingShort circuit protection Line Mode: Fuse & Firmware protectionShort circuit protection Battery Mode: Firmware ProtectionOverload protection Line Mode: 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately.Overload protection Battery Mode: 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediatelyIndicators AC mode: Green LightingIndicators Battery Mode: Yellow FlashingIndicators Fault: Red LightingAlarm Battery Mode: Sounding every 10 SecondsAlarm Low Battery: Sounding every SecondAlarm Overload: Sounding every 0.5 secondAlarm Fault: Continuously soundingFull Protection: Overload, discharge, and Overcharge protectionTransfer Time: Typical 2-6ms, 10ms max.Transfer Time: Typical 2-6ms, 10ms max.Communication Interface: Optional RS232/RJ11Battery and runtime rating: 2 X 12V/9AHRecharge time – Typical: 6-8 hours recover to 90% capacityCharge current: About 1A at normal mode Mercury Elite 2000 Pro Line Interactive UPS provides a relatively robust capacity for power backup to meet office as well as domestic power backup demands. With the Mercury Elite 2000 you not only get power backup for your equipment but also enjoy solid protection for those appliances. The built-in AVR function of the Elite 2000 Pro means dangerous power fluctuations won't easily make mincemeat of your equipment.

Description: Mercury Stabilizer 15KVA AVR|1 Phase Servo Type MER-ZTY15

Input voltage: 100V-255V AC
Power: 15KVA
Technology: Relay Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 220V ± 10%
Phase: Single

Compact Design – Sleek & handy Get the Mercury 15kVA AVR servo stabilizer for that all-important voltage protection to your equipment. With the Mercury 15kVA AVR, you can support heavy-duty equipment or a number of appliances at a stretch. Power fluctuations are common and for anyone using power generators (and who doesn’t?), the risk of voltage fluctuations is even higher. What you must know, also, is that voltage fluctuations can damage your important appliances, causing you financial loss. Automatic voltage regulators, AVR, provide the voltage stabilization that will protect your sensitive equipment. AVRs, commonly called stabilizers, are designed to stabilize the voltage. That not only helps your equipment to function optimally but protects them from damage. The AVR will take a wide input voltage range and output a regulated voltage range that is safe for your equipment. Having an AVR that delivers the expected result is a different matter, though. All AVRs are not made equal. And you need an AVR that does an effective job of providing the voltage stabilization that is imperative to keep your valued equipment safe.

Central Stabilizer for your entire Home/Office. Input Voltage (45V-280V)

Overview

Low, High, Fluctuating NEPA Voltage? One Central Stabilizer for your entire Flat, Home, Office, etc. Input Voltage Range of 45V-280V Stablize and Protect all electrical appliances in your premises: Air Conditioners, Fridges, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc. TM45-15K Relay Automatic Voltage Stabilizer Series is based on digital technology; provides voltage stabilization and protection to appliances and equipment; designed as a central stabilizer to handle all house loads.

Features

Input Voltage Range (45V-280V)
Steady output voltage
Digital Control
Relay Technology
Wall mounted
LED display
Low and Over voltage protection

Applications

Home Appliances
Office Equipment
General Use

Liebert® itON is a single-phase UPS with line-interactive technology, making it ideal for protecting desktop computers and standalone IT equipment while also prolonging battery life with the use of AVR technology. Designed with simple controls for easy operation, it makes user interaction simpler and more efficient. Liebert® itON is a reliable line-interactive UPS designed for the protection of desktop computers and standalone IT equipment. With its compact design and easy to use controls, it provides sufficient backup time in order to save work in progress and gracefully initiate system shutdowns.

Vertiv Liebert ItON 2000VA, Liebert.
Output power capacity: 2000 VA,
Output power: 1200 W,
Input operation voltage (min): 170 V.
AC outlet types: C13 coupler,
Type F, Power plug: C14 coupler,
AC outlets quantity: 6 AC outlet(s).
Battery technology: Sealed Lead Acid (VRLA),
Battery type: VRLA,
Battery recharge time: 6 h.
Form factor: Tower,
Product colour: Black,
International Protection (IP) code: IP20.
UPS topology: Line-Interactive, Response time: 6 ms, Waveform: Stepwise

" alt="Mercury 10KVA AVR 1 Phase Servo Stabilizer" width="500" height="500" data-src="https://www.digitaldirectng.com/wp-content/uploads/2023/04/Mercury-10KVA-AVR-1-Phase-Servo-Stabilizer.jpg" />

Mercury 10KVA AVR – 1 Phase – Servo Stabilizer

Mercury 10KVA AVR - 1 Phase - Servo Stabilizer (Input voltage: 100V-255V AC

Power: 10KVA
Technology: Relay Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 220V ± 10%
Phase: Single
Compact Design – Sleek & handy. Get the Mercury 10kVA AVR for that all-important voltage protection to your equipment. With the Mercury 10kVA AVR, you can support heavy-duty equipment or a number of appliances at a stretch.Power fluctuations are common and for anyone using power generators (and who doesn’t?), the risk of voltage fluctuations is even higher. What you must know, also, is that voltage fluctuations can damage your important appliances, causing you financial loss.Automatic voltage regulators, AVR, provide the voltage stabilization that will protect your sensitive equipment. AVRs, commonly called stabilizers, are designed to stabilize the voltage. That not only helps your equipment to function optimally but protects them from damage. The AVR will take a wide input voltage range and output a regulated voltage range that is safe for your equipment.Having an AVR that delivers the expected result is a different matter, though. All AVRs are not made equal. And you need an AVR that does an effective job of providing the voltage stabilization that is imperative to keep your valued equipment safe.

Small Footprint
Wide Application
High cost effective & High power density
Automatic Control Circuit
High Quality Components
Ring Transformer Structure
Minimum Magnetic Leakage
Convenient Daily Maintenance
Stable Performance and Reliability
No Additional Distortion of Output Waveform
High Precision Auto Voltage Regulator Power Supply
Multi-layer Structure Carbon Brush with Long Service Time
High Adaptability to all kinds of non linear loads such as Inductive load and Capacitive load

APC EASY UPS BV 800VA, AVR, Universal Outlet, 230VBest Value UPS with Battery Backup & Surge Protection for Electronics and Computers Includes: User Manual Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Allow flexibility for setup in tight locations and mounting on wall or other surfaces. Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations. Maximizes battery performance, life, and reliability through intelligent, precision charging. Provides temporary battery power when the utility power is out. Protect equipment with input transformer blocks without blocking access to other receptacles. Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery. Back up and protect your hardware and data during power outages, surges and spikes. Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. Provides notification of changing utility power and UPS power conditions Provide easy-to-read status of the unit and utility power conditions. Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Output power capacity 450 Watts / 800VA Output Connections (4) Universal receptacle (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections BS1363A British Cord Length 1.5meters APC EASY UPS BV 800VA, AVR, Universal Outlet, 230V Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments. Includes: User manual

Weight 13 kg 60 kg 27 kg 5 kg 20 kg 6 kg

Dimensions N/A N/A N/A N/A N/A N/A

Additional information

Weight	13 kg

Weight	60 kg

Weight	27 kg

Weight	5 kg

Weight	20 kg

Weight	6 kg

Sold 0 0 0 0 0 0

Shipping

Subtotal	₦0.00
Total	₦0.00