Image

Mercury 10KVA AVR - 1 Phase - Servo Stabilizer

SKU

SRV3KI

Rating

Price

₦148,000.00

₦95,000.00

₦670,000.00

₦140,000.00

₦108,000.00

₦1,800,000.00

Stock

Out of stock

20 in stock

Availability

Out of stock

20 in stock

Add to cart

Add to cart

Description

Automatic voltage regulator (AVR with boost and trim)
Compact size
Light weight
Easy operation
Overload protection and alarm
Auto re-start with AC recovery
Fast charging
Cold start function

Output power capacity: 375watts / 650va Max configurable power (watts): 375watts / 650va Nominal output voltage: 230v Output frequency (not synced): 50/60 hz +/-1 hz Topology: line interactive Waveform type: stepped approximation to a sinewave Output connections: (6) iec 320 c13 (battery backup) Transfer time: 6ms typical : 10ms maximum Nominal input voltage: 230v Input frequency: 50/60 hz +/- 5 hz (auto sensing) Input connections: iec-320 c14 Cord length: 1.52meters Number of power cords: 1 Battery type: maintenance-free sealed lead-acid battery with suspended electrolyte: leakproof Expected battery life (years): 3 - 5 Efficiency: Communications & management: control panel LED status display with on line : on battery

Mercury 10KVA AVR - 1 Phase - Servo Stabilizer (Input voltage: 100V-255V AC

Power: 10KVA
Technology: Relay Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 220V ± 10%
Phase: Single
Compact Design – Sleek & handy. Get the Mercury 10kVA AVR for that all-important voltage protection to your equipment. With the Mercury 10kVA AVR, you can support heavy-duty equipment or a number of appliances at a stretch.Power fluctuations are common and for anyone using power generators (and who doesn’t?), the risk of voltage fluctuations is even higher. What you must know, also, is that voltage fluctuations can damage your important appliances, causing you financial loss.Automatic voltage regulators, AVR, provide the voltage stabilization that will protect your sensitive equipment. AVRs, commonly called stabilizers, are designed to stabilize the voltage. That not only helps your equipment to function optimally but protects them from damage. The AVR will take a wide input voltage range and output a regulated voltage range that is safe for your equipment.Having an AVR that delivers the expected result is a different matter, though. All AVRs are not made equal. And you need an AVR that does an effective job of providing the voltage stabilization that is imperative to keep your valued equipment safe.

That is where Mercury brand AVRs come in. Mercury AVRs are built to high standards and offer efficient voltage regulation function. With Mercury AVR, you get the result that you expect, with your equipment enjoying that all-important protection from voltage-induced damage. These Mercury AVRs also deliver the durability users expect, serving you for years on end. This is a quality stabilizer, suitable for home appliances and office equipment FEATURES:

Small Footprint
Wide Application
High cost effective & High power density
Automatic Control Circuit
High Quality Components
Ring Transformer Structure
Minimum Magnetic Leakage
Convenient Daily Maintenance
Stable Performance and Reliability
No Additional Distortion of Output Waveform
High Precision Auto Voltage Regulator Power Supply
Multi-layer Structure Carbon Brush with Long Service Time
High Adaptability to all kinds of non linear loads such as Inductive load and Capacitive load

Output Power capacity:600 watts/1.0 KVA
Maximum Configurable Power (Watts):600 Watts/1.0KVA
Nominal Output Voltage:230V
Topology: Line Interactive
Waveform Type: Stepped Approximation to a Sine wave
Transfer Time:6 minutes:10 minutes maximum
Cord Length:1.52 Meters
Number of cords:1
Input Connections’ -320 C14
Battery Type: Maintenance -free sealed Lead-Acid battery with suspended electrolyte: leak proof

Frequent power interruptions can lead to stress and delays in meeting project deadlines while working on your computer. The Mercury Maverick 1550VA line interactive UPS provides a reliable power back up that enables you save your work the moment there is power interruption or public power outage. It has a wide voltage input range of 140~300VAC with a transfer time of 2 – 6ms and is compatible with generators and the erratic public power supply. Features • Built in AVR with wide input range of 140~300VAC • Auto restart • Output short circuit protection • Overload protection • Overcharge protection • Sleek and compact design with cpu control • Green function ( No load cut off ) Country wide maintenance and service centres available Input Voltage 220VAC Input Frequency 50Hz or 60Hz Input Phase Single Input Socket With Fuse Input Range (220v) 140V – 300VAC Rating Output 1550VA/930V Output Waveform Simulated Sine wave Battery Type 12V/8.2AH x2 Dimension(mm) 313 x 129 x 175 Weight (Kg) 4.4

Main
Run time for load W Min-max: 240-2400 W	4min 24s
Max. Capacity Used	100 %
Main Input Voltage	230 V AC 1 phase
Input voltage	220 V 240 V
Input Connection Type	IEC 60320 C20
Input voltage limits	110...285 V half load 160...280 V full load
Network frequency	40...70 Hz auto sensing
Output voltage	230 V AC 1 phase
Output voltage	220 V 240 V
Rated power in W	2400 W
rated power in VA	3000 VA
Output connection type	6 IEC 60320 C13 1 IEC 60320 C19
Bypass type	Internal bypass (automatic and manual)
Crest factor	3 : 1
Harmonic distortion	3 %
Maximum configurable power in VA	3000 VA
Maximum configurable power in W	2400 W
UPS type	On-Line
Wave type	Sine wave
Efficiency	88 % (full load)
Output frequency	50/60 Hz +/- 3 Hz sync to mains

Complementary
Additional information	Configurable for 220 : 230 or 240 nominal output voltage
Battery type	Lead-acid internal included
Control panel	Multifunction LCD status and control console
Free slots	1
Alarm	Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
UPS connectivity	Serial port USB port Available expansion slot
Surge energy rate	600 J
Cable length	1.5 m
Number of cables	1
Colour	Black (RAL 7010)
Height	336 mm
Width	190 mm
Depth	425 mm
Net weight	26.8 kg
Mounting location	Front
Mounting preference	No preference
Mounting mode	Not rack-mountable
USB compatible	Yes
Mounting position	Vertical
Mounting mode	Tower
Number of power module filled slots	0
Number of power module free slots	0
Redundant	No
Range of product	Easy UPS On-Line
Product or component type	Uninterruptible power supply (UPS)

Environment
Product certifications	CE UKCA EAC TISI
Standards	EN/IEC 62040-1:2019/A11:2021 EN/IEC 62040-2:2006/AC:2006 EN/IEC 62040-2:2018
Ambient air temperature for operation	0…40 °C
Ambient air temperature for storage	-20…50 °C
Storage altitude	0…15000 m
IP degree of protection	IP20
Relative humidity	0…95 % non-condensing
Storage Relative Humidity	0…95 % non-condensing
Acoustic level	50 dBA
Heat dissipation	910 Btu/h
Operating altitude	0...3000 m

Batteries & Runtime
Run Time
Efficiency
Battery type	Lead-acid battery
Battery voltage	72 V
Extended runtime	0
Number of battery filled slots	0
Number of battery free slots	0
Battery recharge time	4 h
Battery life	3…5 year(s)
Replacement battery
Battery charger power	60 W rated

Content

The Liebert itON 1500 VA is a reliable line interactive ups designed to protect desktops and standalone computing equipment. The Liebert itON comes with an automatic voltage regulator (AVR) to provide flexibility and reliability to computers and other sensitive electronic equipment. With its compact design and easy –to use controls, the Liebert itON offer sufficient autonomy to safely back up current tasks before shutting down the system. LI32141CT21 is ideally suited for the following equipment:

Desktop PCs
Professional workstations
Small routers, bridges, and hubs
Point-of-sale terminals
Other sensitive electronics

Features

Equipment with boost and buck AVR to stabilize the input voltage
Microprocessor control guarantees high reliability
Provides AC overload protection
Auto-restart with AC recover
Compact size, lightweight
Fast charging
Off mode charging
Cold start function
Overload protection and alarm
USB communication port for monitoring and shutdown software (UX models only)

Top Benefits

Smart RS232/USB interface for power management
Excellent microprocessor control guarantees high reliability
AVR Boost and buck for voltage stabilization
Auto restart while AC is recovering
Simulated sine wave
Auto charging at Off-mode
Cold start function
Generator compatible

Key Specifications CAPACITY 1500 VA/900 Watt. INPUT

Voltage 220/230 VAC
INPUT Voltage Range 140-300 VAC
Frequency Range 50 Hz

OUTPUT

AC Voltage Regulation (Batt. Mode) ±10%
Frequency Range (Batt. Mode) 50 Hz ±1 Hz
Transfer Time Typical 2-6 ms
Waveform (Batt. Mode) Simulated Sine Wave
Overload 110% +/-10% Shutdown after 5 mins

BATTERY

Battery Type & Number 12 V/7 Ah x 2
Typical Recharge Time 6-8 hours up to 90% capacity

TRANSFER TIME Minimum line break for Typical 4-8 msec transfer to battery

APC EASY UPS BV 650VA, AVR, Universal Outlet, 230V

Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers.

Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

Provides early-warning fault analysis on batteries, enabling timely preventive maintenance

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Provides temporary battery power when the utility power is out.

Protect equipment with input transformer blocks without blocking access to other receptacles.

The slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Back up and protect your hardware and data during power outages, surges and spikes.

Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.

Provides notification of changing utility power and UPS power conditions

Provide easy-to-read status of the unit and utility power conditions.

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

" alt="Mercury 10KVA AVR 1 Phase Servo Stabilizer" width="500" height="500" data-src="https://www.digitaldirectng.com/wp-content/uploads/2023/04/Mercury-10KVA-AVR-1-Phase-Servo-Stabilizer.jpg" />

Mercury 10KVA AVR – 1 Phase – Servo Stabilizer

Mercury 10KVA AVR - 1 Phase - Servo Stabilizer (Input voltage: 100V-255V AC

Power: 10KVA
Technology: Relay Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 220V ± 10%
Phase: Single
Compact Design – Sleek & handy. Get the Mercury 10kVA AVR for that all-important voltage protection to your equipment. With the Mercury 10kVA AVR, you can support heavy-duty equipment or a number of appliances at a stretch.Power fluctuations are common and for anyone using power generators (and who doesn’t?), the risk of voltage fluctuations is even higher. What you must know, also, is that voltage fluctuations can damage your important appliances, causing you financial loss.Automatic voltage regulators, AVR, provide the voltage stabilization that will protect your sensitive equipment. AVRs, commonly called stabilizers, are designed to stabilize the voltage. That not only helps your equipment to function optimally but protects them from damage. The AVR will take a wide input voltage range and output a regulated voltage range that is safe for your equipment.Having an AVR that delivers the expected result is a different matter, though. All AVRs are not made equal. And you need an AVR that does an effective job of providing the voltage stabilization that is imperative to keep your valued equipment safe.

That is where Mercury brand AVRs come in. Mercury AVRs are built to high standards and offer efficient voltage regulation function. With Mercury AVR, you get the result that you expect, with your equipment enjoying that all-important protection from voltage-induced damage. These Mercury AVRs also deliver the durability users expect, serving you for years on end. This is a quality stabilizer, suitable for home appliances and office equipment FEATURES:

Small Footprint
Wide Application
High cost effective & High power density
Automatic Control Circuit
High Quality Components
Ring Transformer Structure
Minimum Magnetic Leakage
Convenient Daily Maintenance
Stable Performance and Reliability
No Additional Distortion of Output Waveform
High Precision Auto Voltage Regulator Power Supply
Multi-layer Structure Carbon Brush with Long Service Time
High Adaptability to all kinds of non linear loads such as Inductive load and Capacitive load

Best Value UPS with Battery Backup and Surge Protection for Electronics and Computers Automatic voltage regulation: Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Wall-mount holes: Allow flexibility for set up in tight locations and mount on walls or other surfaces Battery and Surge Protected Outlets: Back up and protect your hardware and data during power outages, Surges, and Spikes. Battery backup and Surge Protection: Outlets provides abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. Audible Alarms: Provides notification of changing utility power and UPS power conditions SLEEK DESIGN: Slim, modern design can be upright, flat or wall-mounted to comfortably fit any electronic set-up and complement Home decor. Transformer-block spaced outlets: Protect equipment with input transformer blocks without blocking access to other receptacles. Cold-start capable: Provides temporary battery power when the utility power is out. Boost Automatic Voltage Regulations (AVR): Preserves battery life and maximizes run time by correcting low voltages without discharging the batteries. Battery failure notification: Provides early-warning fault analysis on battery enabling timely preventive maintenance. Advanced Safety Features: Safeguards your Home UPS from overloads, excessive mains voltage, short circuits, installation mishaps and battery damage due to low voltage situations

Frequent power interruptions can lead to stress and delays in meeting project deadlines while working on your computer. The Mercury Maverick 1550VA line interactive UPS provides a reliable power back up that enables you save your work the moment there is power interruption or public power outage. It has a wide voltage input range of 140~300VAC with a transfer time of 2 – 6ms and is compatible with generators and the erratic public power supply. Features • Built in AVR with wide input range of 140~300VAC • Auto restart • Output short circuit protection • Overload protection • Overcharge protection • Sleek and compact design with cpu control • Green function ( No load cut off ) Country wide maintenance and service centres available Input Voltage 220VAC Input Frequency 50Hz or 60Hz Input Phase Single Input Socket With Fuse Input Range (220v) 140V – 300VAC Rating Output 1550VA/930V Output Waveform Simulated Sine wave Battery Type 12V/8.2AH x2 Dimension(mm) 313 x 129 x 175 Weight (Kg) 4.4

This APC Single phase Easy UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 3kVA double-conversion on-line tower UPS provides pure sine wave power to support critical electronics during power disruptions. The SRV comes with IEC 320 C20 input, 6x IEC 320 C13 and 1x IEC 320 C19 outlets. The On-Line UPS has a intelligent card slot for optional Network Management Card (AP9544, SRVSMB001, VGL9901l) that enables network-based UPS monitoring and management. The UPS can connect to EcoStruxure IT or third-party centralized management platforms. The Built-in automatic and manual bypass provide seamless power to the load even in the event of an internal detected fault or error in UPS. The SRV UPS is compatible with replacement battery cartridge APCRBCV205. The Easy UPS and the built-in lead-acid battery has a 2-year warranty. Ideal for small data centers, manufacturing facilities, computer rooms, network storage devices, telecommunication, and healthcare IT.

Weight

5 kg

0.2 kg

20 kg

7 kg

4.4 kg

26 kg

Dimensions

N/A

313 × 129 × 175 cm

N/A

Additional information

Weight	5 kg

Weight	0.2 kg

Weight	20 kg

Weight	7 kg

Weight	4.4 kg
Dimensions	313 × 129 × 175 cm

Weight	26 kg

Sold

0

Shipping

Subtotal	₦0.00
Total	₦0.00

Vertiv Liebert itON 1500VA E 230V IEC-IEC UPS

Product details

Shipping and Returns

Rating & Review

Question & Answer

Quick Comparison

Mercury 10KVA AVR – 1 Phase – Servo Stabilizer

APC SMART-UPS 900WATTS/1500VA

Mercury Maverick 650VA UPS

Mercury 2KVA Digital Stabilizer

Vertiv Liebert itON 400VA

Mercury Maverick 1550va UPS

Vertiv Liebert itON 1500VA E 230V IEC-IEC UPS

Product details

Shipping and Returns

Rating & Review

Question & Answer

Quick Comparison

Mercury 10KVA AVR – 1 Phase – Servo Stabilizer

Related products

APC SMART-UPS 900WATTS/1500VA

Mercury Maverick 650VA UPS

Mercury 2KVA Digital Stabilizer

Vertiv Liebert itON 400VA

Mercury Maverick 1550va UPS

Shopping Cart