Don’t miss out great discount.

Huawei 6KVA Power Module Inverter + 10kWh Battery

7,200,000.00
29 people are viewing this right now
Estimated Delivery:
07 - 14 Dec, 2025
Trust Badge
Guaranteed safe & secure checkout

Product details

The Huawei Power Module Comes with 2 batteries (5kWh each) is an advanced, high-performance solution designed for efficient energy management in residential, commercial, and industrial applications. Engineered with versatility, reliability, and durability in mind, this energy storage system integrates seamlessly with renewable energy sources, offering robust energy storage, backup power, and grid independence. Its modular design and flexible installation options ensure adaptability to diverse needs while maintaining optimal performance.

Basic Parameters
Dimensions (W * H * D)
Single power module: 700 mm x 246 mm x 152 mm
Single battery module: 700mm x 390 mm x 158 mm
Base (mandatory for floor installation): 700 mm x 65 mm x 147 mm
Base (mandatory for wall-mounted installation): 643 mm x 110 mm x 176 mm
Weight Approx. 17 kg for a single power module
Approx.50 kg for a single energy storage module
Installation Mode Wall-mounted/ground-mounted
Degree of protection IP66
AC input
Input voltage 200/208/220/230/240V AC
Input current Max. 30 A
Frequency 50/60Hz
Maximum bypass input power 6kW
Lightning protection Differential mode: 3KA; common mode (two-wire pair PE): 5KA; 8/20 μs
SOLAR.HUAWEI.COM/EU/
1. Test conditions: 100% depth of discharge (DoD), 0.2C rate charge & discharge at 25℃, at the beginning of life. If no PV modules are installed or the system has not detected sunlight for at least 24 hours, the minimum end of
discharge SOC is 15%.
2. The weight of the battery module is subject to the actual product, with a tolerance of ±3%
3. Refer to battery warranty letter for conditional application.
4. Improper storage system installation may compromise product warranty and operation safety. Please follow the user manual during the installation, use, and maintenance of the storage system.
5. Noise Level(Typical):<29 dB(A) @1m, 30℃, Power On and Run Stably for 2 Hours
PV input
MPPT voltage range 90-420V DC
Maximum input capacity of the MPPT 5.5kWp
PV string quantity 2 strings
Number of MPPT channels 1 channel
Maximum input current for one string 12.5A
Maximum short circuit current for one string 18A
Lightning protection Complies with EN/IEC 61643-11 TYPE II
AC output
Output voltage system Single-phase 200/208/220/230/240V AC. The default value is 220V AC
Output frequency 50/60 Hz. The default value is 50 Hz.
Maximum output current 30A
Output power 6kVA/5kW
Power factor 0.8
Overload capacity
102% ≤ Load ≤ 125% 30s
125% < Load ≤ 150% 10s
>150%/short circuit 0.3s
Battery parameters
Rated capacity 5 kWh per module
Maximum capacity
Single system scenario: max. support 6 pcs batteries, 5 kW output (5Kw@30kWh)
Parallel system scenarios: max. 3 power modules can be paralleled. Each power module supports max. 3
batteries (15Kw@45kWh)
Maximum output/input power 2.5 kW per module
AC parallel box
Dimensions (W * H * D) 350 mm x 450 mm x 150 mm
Weight Approx. 12 kg
Input voltage 200/208/220/230/240 V AC. The default value is 220 V AC.
Input current Maximum 90A
Output voltage 200/208/220/230/240 V AC. The default value is 220 V AC.
Output current Max. 90A
Cable outlet mode Bottom in and bottom out
Installation Mode Wall-mounted or pole-mounted installation
Degree of protection IP55
Environmental parameters
Operating temperature 0°C to 45°C (without +1120w/m^2 solar radiation)
Transport temperature – 40°C -+ 70°C
Storage temperature – 40°C -+ 70°C
Relative humidity 5%-95% (RH)
Altitude Requirements 0~4000m (The operating temperature decreases by 1°C per 200m when the altitude is 2000 m to 4000

Quick Comparison

Huawei 6KVA Power Module Inverter + 10kWh Battery removeMercury MH 3500VA Inverter, 48VDC, Pure Sinewave removePrag 3kw Premium Solar Inverter-VT removeiPower XMAX Inverter 3KVA/3KW/80Amp Axpert VMII Premium -24VDC removePrag 4kva 24v Pure Sine Wave Inverter - Wall Mount removeMercury 3.5kva Off Grid Hybrid Solar Inverter 24v, MPPT remove
NameHuawei 6KVA Power Module Inverter + 10kWh Battery removeMercury MH 3500VA Inverter, 48VDC, Pure Sinewave removePrag 3kw Premium Solar Inverter-VT removeiPower XMAX Inverter 3KVA/3KW/80Amp Axpert VMII Premium -24VDC removePrag 4kva 24v Pure Sine Wave Inverter - Wall Mount removeMercury 3.5kva Off Grid Hybrid Solar Inverter 24v, MPPT remove
ImageHuawei 6KVA Power Module Inverter + 10kWh BatteryMercury MH 3500VA Inverter, 48VDC, Pure SinewavePrag 3kw Premium Solar Inverter-VTiPower XMAX Inverter 3KVA/3KW/80Amp Axpert VMII Premium -24VDCPrag 4kva 24v Pure Sine Wave Inverter - Wall MountMercury 3.5kva Off Grid Hybrid Solar Inverter 24v, MPPT
SKU
Rating
Price
7,200,000.00
870,000.00
710,000.00
475,000.00
965,000.00
630,000.00
Stock
20 in stock
20 in stock
Availability20 in stock20 in stock
Add to cart

Description

Key Features

  1. Compact and Modular Design
  2. Superior Energy Storage
  3. High Power Output
  4. Solar and Grid Integration
  5. Durability and Safety
  6. Silent Operation
  7. Environmentally Resilient
  8. Energy Efficiency
  9. Comprehensive Installation Options

The Huawei Energy Storage System offers a reliable, scalable, and eco-friendly solution to meet diverse energy needs, ensuring consistent power delivery and sustainable energy management. Whether for residential backup, commercial energy optimization, or renewable energy integration, this system delivers unparalleled efficiency and performance.

  • Digital Display
  • Pure sine Wave
  • Inverter
Upgrade your energy system with the versatile and efficient 3KW/24V Hybrid Inverter (3000W-MPPT). Designed for both flexibility and reliability, this inverter seamlessly operates with or without a battery, ensuring uninterrupted power supply in diverse conditions.
  • A smart battery charger that optimizes battery performance
  • Selectable charging current depending on the applications
  • Selectable input voltage range
  • Configurable solar/AC input priority
  • Auto restart while AC recovers
  • A perfect alarming system
PRAG H-Series Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak conversion efficiency of 88%. It is packed with unique features and it is one of the most advanced inverter/chargers in the market today. It features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment. PRAG H-Series Inverter is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.he Mercury 3.5KVA (M3500)Pure Sine Wave with  UPS functionality is a generation ahead of the entire category. That’s because our breakthrough chip embedded sine wave’ technology delivers the same current as you get from your mains.
  • Digital Display
  • Pure sine Wave
  • Inverter
ContentThe Huawei Power Module Comes with 2 batteries (5kWh each) is an advanced, high-performance solution designed for efficient energy management in residential, commercial, and industrial applications. Engineered with versatility, reliability, and durability in mind, this energy storage system integrates seamlessly with renewable energy sources, offering robust energy storage, backup power, and grid independence. Its modular design and flexible installation options ensure adaptability to diverse needs while maintaining optimal performance. Basic Parameters Dimensions (W * H * D) Single power module: 700 mm x 246 mm x 152 mm Single battery module: 700mm x 390 mm x 158 mm Base (mandatory for floor installation): 700 mm x 65 mm x 147 mm Base (mandatory for wall-mounted installation): 643 mm x 110 mm x 176 mm Weight Approx. 17 kg for a single power module Approx.50 kg for a single energy storage module Installation Mode Wall-mounted/ground-mounted Degree of protection IP66 AC input Input voltage 200/208/220/230/240V AC Input current Max. 30 A Frequency 50/60Hz Maximum bypass input power 6kW Lightning protection Differential mode: 3KA; common mode (two-wire pair PE): 5KA; 8/20 μs SOLAR.HUAWEI.COM/EU/ 1. Test conditions: 100% depth of discharge (DoD), 0.2C rate charge & discharge at 25℃, at the beginning of life. If no PV modules are installed or the system has not detected sunlight for at least 24 hours, the minimum end of discharge SOC is 15%. 2. The weight of the battery module is subject to the actual product, with a tolerance of ±3% 3. Refer to battery warranty letter for conditional application. 4. Improper storage system installation may compromise product warranty and operation safety. Please follow the user manual during the installation, use, and maintenance of the storage system. 5. Noise Level(Typical):<29 dB(A) @1m, 30℃, Power On and Run Stably for 2 Hours PV input MPPT voltage range 90-420V DC Maximum input capacity of the MPPT 5.5kWp PV string quantity 2 strings Number of MPPT channels 1 channel Maximum input current for one string 12.5A Maximum short circuit current for one string 18A Lightning protection Complies with EN/IEC 61643-11 TYPE II AC output Output voltage system Single-phase 200/208/220/230/240V AC. The default value is 220V AC Output frequency 50/60 Hz. The default value is 50 Hz. Maximum output current 30A Output power 6kVA/5kW Power factor 0.8 Overload capacity 102% ≤ Load ≤ 125% 30s 125% < Load ≤ 150% 10s >150%/short circuit 0.3s Battery parameters Rated capacity 5 kWh per module Maximum capacity Single system scenario: max. support 6 pcs batteries, 5 kW output (5Kw@30kWh) Parallel system scenarios: max. 3 power modules can be paralleled. Each power module supports max. 3 batteries (15Kw@45kWh) Maximum output/input power 2.5 kW per module AC parallel box Dimensions (W * H * D) 350 mm x 450 mm x 150 mm Weight Approx. 12 kg Input voltage 200/208/220/230/240 V AC. The default value is 220 V AC. Input current Maximum 90A Output voltage 200/208/220/230/240 V AC. The default value is 220 V AC. Output current Max. 90A Cable outlet mode Bottom in and bottom out Installation Mode Wall-mounted or pole-mounted installation Degree of protection IP55 Environmental parameters Operating temperature 0°C to 45°C (without +1120w/m^2 solar radiation) Transport temperature - 40°C -+ 70°C Storage temperature - 40°C -+ 70°C Relative humidity 5%-95% (RH) Altitude Requirements 0~4000m (The operating temperature decreases by 1°C per 200m when the altitude is 2000 m to 4000The Mercury 3.5KVA (M3500)Pure Sine Wave with  UPS functionality is a generation ahead of the entire category. That’s because our breakthrough chip embedded sine wave’ technology delivers the same current as you get from your mains.  The distinguishing features of this Mercury 3.5KVA inverter Pure Sine Wave are:
  • DSP technology for fast & smooth charging
  • Auto Sense intelligent charging (ASIC) adjustment
  • Highly robust & reliable ideal for computers
  • User selectable charging current
  • Wide charging voltage range
  • Low battery Warning
  • Overload warning
  • Main fuse blown protection
  • Short circuit protection
Specification Mercury 3.5kva Inverter Specification Voltage Range 180 VAC – 265VAC ± 5 VAC (UPS Mode) 100 VAC – 280 VAC ± 15 VAC (NOR Mode) Line Low Detection 180V ± 5V (UPS Mode) / 100V ± 15V (NOR Mode) Line Low Comeback 190V ± 5V (UPS Mode) / 110V ± 10V (NOR Mode) Line Low Detection 265V ± 5V (UPS Mode) / 280V ± 15V (NOR Mode) Line Low Comeback 255V ± 5V (UPS Mode) / 270V ± 10V (NOR Mode) Frequency Transfer Input Frequency 45-55 Hz Characteristics (AC) Inverter Full Load Power 2800 Power Factor 0.8 factor (on resistive load) On-Line Mode Sine Wave Battery Mode Sine Wave On-Line Output voltage Follow the Line Voltage Battery Mode Output Voltage 200 VAC ± 10% Transfer Time (No-Load) <15 ms The frequency at Battery Mode 50 Hz ± 1 Hz Characteristics (DC) DC Supply Voltage 48V Battery Floating Charge Voltage 54.0 VDC ± 0.8 VDC Charge Current <15 A Battery Voltage Low Alarm 42.4 VDC ± 0.8 VDC Battery Discharge Protection 41.6 VDC ± 0.4 VDC Over Charge Protection > 60.0 VDC ± 0.8 VDC  
Key Features:
  • 450V/3000W MPPT Technology: Maximize solar energy utilization with our advanced Maximum Power Point Tracking (MPPT) feature, delivering optimal performance and efficiency.
  • High Charging Current: Enjoy faster battery charging with a high charging current capability, enhancing energy storage and reliability.
  • Wide PV Input Voltage Range: Accommodate a broad range of solar panel configurations with a high input voltage range.
  • Cost-Effective Solution: Achieve superior performance at an affordable price, making it a smart investment for your energy needs.
  • Pure Sine Wave Output: Benefit from clean and stable power for sensitive electronic devices, ensuring reliable operation and longevity.
  • Cold Start Function: Power up even in low-light conditions with the cold start feature, making it ideal for diverse environments.
  • Optional Anti-Dusk Kit: Enhance durability and performance with an optional anti-dusk kit, protecting against dust and debris.
  • Comprehensive LCD Display: Easily monitor and configure settings with a clear and user-friendly LCD display.
  • Smart Battery Charger Design: Optimize battery performance with a sophisticated charger design, ensuring efficient energy use and extended battery life.
  • Auto Restart Function: Experience automatic recovery and uninterrupted power when AC power is restored.
  • Overload and Short Circuit Protection: Safeguard your system with built-in protection features against overloads and short circuits.
  • Compatible with Mains Voltage or Generator Power: Enjoy flexibility in power sources, compatible with both mains electricity and generator power.
  • Configurable AC/Solar Input Priority: Customize your energy priorities via LCD settings to suit your specific needs.
  • Selectable Input Voltage Range: Adapt to various home appliances and personal computers with adjustable input voltage settings.
Whether you’re upgrading your home energy system or seeking a reliable power solution, the 3KW/24V Hybrid Inverter offers unmatched efficiency, flexibility, and performance.

3KW/24V Hybrid Inverter (3000W-MPPT) Features

  • Operates with or without battery
  • 450V/3000W MPPT
  • High Charging Current
  • High PV input voltage range
  • Cost effective Inverter
  • Output power factor 1
  • Wide DC input range
  • Cold start function
  • Optional anti-dusk kit
  • Inbuilt MPPT Solar Charger
  • Pure Sine wave Solar Inverter
  • Selectable high charging current
  • Auto restart while AC is recovering
  • Overload and short circuit protection
  • Compatible to mains voltage or generator power
  • Configurable AC/Solar input priority via LCD setting
  • Smart battery charger design for optimized battery performance
  • Comprehensive LCD Display: For monitoring and configuration
  • Selectable input voltage range for home appliances and personal computers
Brand iPower
Warranty Period 1 Year
MODEL iPowerxMaX3000-24
RatedPower 3000VA/3000W
INPUT
Voltage 230VAC
SelectableVoltageRange 170-280VAC(ForPersonalComputers); 90- 280 VAC(ForHomeAppliances)
FrequencyRange 50Hz/60Hz(Autosensing)
OUTPUT
ACVoltageRegulation(Batt.Mode) 230VAC±5%
SurgePower 6000VA
Efficiency(Peak) 90%~93%
TransferTime 10ms(ForPersonalComputers);20ms(For HomeAppliances)
Waveform Puresinewave
BATTERY
BatteryVoltage 24VDC
FloatingChargeVoltage 27VDC
OverchargeProtection 32VDC
SOLARCHARGER&ACCHARGER
SolarChargerType MPPT
MaximumPVArrayOpenCircuitVoltage 450VDC
MaximumPVArrayPower 3000W
MPPRange@OperatingVoltage 60-400VDC
MaximumSolarChargeCurrent 80A
MaximumAC ChargeCurrent 80A
MaximumChargeCurrent 80A
PHYSICAL
Dimension,DxWxH(mm) 100x288x390
NetWeight(kgs) 8.0
CommunicationInterface RS232
ENVIRONMENT
Humidity 5%to95%RelativeHumidity(Non- condensing)
OperatingTemperature -10°Cto50°C
StorageTemperature -15°Cto60°C
4KVA-24V Pure Sine Wave Inverter - Wall Mount-H + AC/DC Cables PRAG H-Series Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak conversion efficiency of 88%. It is packed with unique features and it is one of the most advanced inverter/chargers in the market today. It features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment. PRAG H-Series Inverter is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer. Features
  • Easy to Install & Easy to Operate & Easy to Solve
  • Designed to Operate under Harsh Environment
  • DC Start & Automatic Self-Diagnostic Function
  • Powerful Charge Rate Up to 120Amp (depending on model), Selectable From 0%-100%
  • High Efficiency Design & “Power Saving Mode” to Conserve Energy
  • 8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Batteries
  • 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
  • 8 ms Typical Transfer Time Between Utility & Battery, Guarantees Power Continuity
  • 15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
  • Battery DOD(Depth of Discharge) setting from 50% to 100%.
  • SNMP remote monitoring (available as an option)
The Mercury 3.5KVA (M3500)Pure Sine Wave with  UPS functionality is a generation ahead of the entire category. That’s because our breakthrough chip embedded sine wave’ technology delivers the same current as you get from your mains.  The distinguishing features of this Mercury 3.5KVA inverter Pure Sine Wave are:
  • DSP technology for fast & smooth charging
  • Auto Sense intelligent charging (ASIC) adjustment
  • Highly robust & reliable ideal for computers
  • User selectable charging current
  • Wide charging voltage range
  • Low battery Warning
  • Overload warning
  • Main fuse blown protection
  • Short circuit protection
Specification Mercury 3.5kva Inverter Specification Voltage Range 180 VAC – 265VAC ± 5 VAC (UPS Mode) 100 VAC – 280 VAC ± 15 VAC (NOR Mode) Line Low Detection 180V ± 5V (UPS Mode) / 100V ± 15V (NOR Mode) Line Low Comeback 190V ± 5V (UPS Mode) / 110V ± 10V (NOR Mode) Line Low Detection 265V ± 5V (UPS Mode) / 280V ± 15V (NOR Mode) Line Low Comeback 255V ± 5V (UPS Mode) / 270V ± 10V (NOR Mode) Frequency Transfer Input Frequency 45-55 Hz Characteristics (AC) Inverter Full Load Power 2800 Power Factor 0.8 factor (on resistive load) On-Line Mode Sine Wave Battery Mode Sine Wave On-Line Output voltage Follow the Line Voltage Battery Mode Output Voltage 200 VAC ± 10% Transfer Time (No-Load) <15 ms The frequency at Battery Mode 50 Hz ± 1 Hz Characteristics (DC) DC Supply Voltage 48V Battery Floating Charge Voltage 54.0 VDC ± 0.8 VDC Charge Current <15 A Battery Voltage Low Alarm 42.4 VDC ± 0.8 VDC Battery Discharge Protection 41.6 VDC ± 0.4 VDC Over Charge Protection > 60.0 VDC ± 0.8 VDC  
WeightN/A35 kgN/A8 kgN/AN/A
DimensionsN/AN/AN/A100 × 288 × 390 cmN/AN/A
Additional information
Weight 35 kg
Weight 8 kg
Dimensions 100 × 288 × 390 cm
Sold000000
Shipping
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Add to cart
Click outside to hide the comparison bar
Compare