Huawei 6KVA Power Module Inverter + 10kWh Battery

Product details

The Huawei Power Module Comes with 2 batteries (5kWh each) is an advanced, high-performance solution designed for efficient energy management in residential, commercial, and industrial applications. Engineered with versatility, reliability, and durability in mind, this energy storage system integrates seamlessly with renewable energy sources, offering robust energy storage, backup power, and grid independence. Its modular design and flexible installation options ensure adaptability to diverse needs while maintaining optimal performance.

Basic Parameters
Dimensions (W * H * D)
Single power module: 700 mm x 246 mm x 152 mm
Single battery module: 700mm x 390 mm x 158 mm
Base (mandatory for floor installation): 700 mm x 65 mm x 147 mm
Base (mandatory for wall-mounted installation): 643 mm x 110 mm x 176 mm
Weight Approx. 17 kg for a single power module
Approx.50 kg for a single energy storage module
Installation Mode Wall-mounted/ground-mounted
Degree of protection IP66
AC input
Input voltage 200/208/220/230/240V AC
Input current Max. 30 A
Frequency 50/60Hz
Maximum bypass input power 6kW
Lightning protection Differential mode: 3KA; common mode (two-wire pair PE): 5KA; 8/20 μs
SOLAR.HUAWEI.COM/EU/
1. Test conditions: 100% depth of discharge (DoD), 0.2C rate charge & discharge at 25℃, at the beginning of life. If no PV modules are installed or the system has not detected sunlight for at least 24 hours, the minimum end of
discharge SOC is 15%.
2. The weight of the battery module is subject to the actual product, with a tolerance of ±3%
3. Refer to battery warranty letter for conditional application.
4. Improper storage system installation may compromise product warranty and operation safety. Please follow the user manual during the installation, use, and maintenance of the storage system.
5. Noise Level(Typical):<29 dB(A) @1m, 30℃, Power On and Run Stably for 2 Hours
PV input
MPPT voltage range 90-420V DC
Maximum input capacity of the MPPT 5.5kWp
PV string quantity 2 strings
Number of MPPT channels 1 channel
Maximum input current for one string 12.5A
Maximum short circuit current for one string 18A
Lightning protection Complies with EN/IEC 61643-11 TYPE II
AC output
Output voltage system Single-phase 200/208/220/230/240V AC. The default value is 220V AC
Output frequency 50/60 Hz. The default value is 50 Hz.
Maximum output current 30A
Output power 6kVA/5kW
Power factor 0.8
Overload capacity
102% ≤ Load ≤ 125% 30s
125% < Load ≤ 150% 10s
＞150%/short circuit 0.3s
Battery parameters
Rated capacity 5 kWh per module
Maximum capacity
Single system scenario: max. support 6 pcs batteries, 5 kW output (5Kw@30kWh)
Parallel system scenarios: max. 3 power modules can be paralleled. Each power module supports max. 3
batteries (15Kw@45kWh)
Maximum output/input power 2.5 kW per module
AC parallel box
Dimensions (W * H * D) 350 mm x 450 mm x 150 mm
Weight Approx. 12 kg
Input voltage 200/208/220/230/240 V AC. The default value is 220 V AC.
Input current Maximum 90A
Output voltage 200/208/220/230/240 V AC. The default value is 220 V AC.
Output current Max. 90A
Cable outlet mode Bottom in and bottom out
Installation Mode Wall-mounted or pole-mounted installation
Degree of protection IP55
Environmental parameters
Operating temperature 0°C to 45°C (without +1120w/m^2 solar radiation)
Transport temperature – 40°C -+ 70°C
Storage temperature – 40°C -+ 70°C
Relative humidity 5%-95% (RH)
Altitude Requirements 0~4000m (The operating temperature decreases by 1°C per 200m when the altitude is 2000 m to 4000