APC Smart-UPS 5000VA 230V rackmount / tower (SUA5000RMI5U)

• Vertiv Liebert ItON 2000VA, Liebert.
• Output power capacity: 2000 VA,
• Output power: 1200 W,
• Input operation voltage (min): 170 V.
• AC outlet types: C13 coupler,
• Type F, Power plug: C14 coupler,
• AC outlets quantity: 6 AC outlet(s).
• Battery technology: Sealed Lead Acid (VRLA),
• Battery type: VRLA,
• Battery recharge time: 6 h.
• Form factor: Tower,
• Product colour: Black,
• International Protection (IP) code: IP20.
• UPS topology: Line-Interactive, Response time: 6 ms, Waveform: Stepwise

• Input voltage: 100V-255V AC
• Power: 15KVA
• Technology: Relay Control + Toroidal Transformer System
• Efficiency: > 97%
• Display: LED Digital Display
• Frequency: 50Hz/60Hz
• Delay Time: Short Delay (3-5 sec)
• Over-voltage protection: AC246 ± 4V
• High Temperature
• Short Circuit
• Output voltage: 220V ± 10%
• Phase: Single

• Compact Design – Sleek & handy Get the Mercury 15kVA AVR servo stabilizer for that all-important voltage protection to your equipment. With the Mercury 15kVA AVR, you can support heavy-duty equipment or a number of appliances at a stretch. Power fluctuations are common and for anyone using power generators (and who doesn’t?), the risk of voltage fluctuations is even higher. What you must know, also, is that voltage fluctuations can damage your important appliances, causing you financial loss. Automatic voltage regulators, AVR, provide the voltage stabilization that will protect your sensitive equipment. AVRs, commonly called stabilizers, are designed to stabilize the voltage. That not only helps your equipment to function optimally but protects them from damage. The AVR will take a wide input voltage range and output a regulated voltage range that is safe for your equipment. Having an AVR that delivers the expected result is a different matter, though. All AVRs are not made equal. And you need an AVR that does an effective job of providing the voltage stabilization that is imperative to keep your valued equipment safe.

Liebert itON 400VA is a reliable line-interactive UPS designed for the protection of desktop computers and standalone IT equipment. Liebert itON comes complete with an automatic voltage regulator (AVR) allowing flexibility and reliability for PCs and other sensitive electronic equipment. With its compact design and easy to use controls, Liebert itON also provides sufficient back up time, allowing work in progress to be saved safely before proceeding with the system shutdown. Liebert itON also comes complete with automatic restart and cold start functions for increased continuity and availability.

• Apparent power: 400 VA

• UPS architecture: line-interactive

• Number of phases at the input: 1 (230V)

• Number of batteries: 1

• Voltage: 12 V

• Battery capacity: 4.5 Ah

• Hold time (100% load): 4 min

• Charging time: 4 hours

• Enclosure type: Tower

• Security / filters: Excessive discharge, Overload

• Special functions: - Cold start - Automatic voltage regulation system (AVR) - Sine when working on the battery LEDs indicating: - Charging the battery - Overloading the UPS - Low battery - Overload - Necessary battery replacement - Battery failure

• Power supply ports: Type F Schuko

• Power ports: 2 x type C / F (Schuko)

• Connectors: None

• Environmental requirements: - Operating temperature: from 0 to 40 degrees C- Storage temperature: from -20 to 50 degrees C- Operating humidity / storage: 0 - 90% (non-condensing)

• Accessories in the set: Operating instructions

• Color: Black, Gray

• Dimensions: - Width: 100 mm - Height: 142 mm - Depth: 287 mm

• Weight: 3.55 kg

• Other parameters: - Real power: 240W- Input connector: cable with Schuko plug (10A) - Hold time at 50% load: 8 minutes - Input voltage range in basic mode: 162-290V- Variable input voltage range: 220-240V