Don’t miss out great discount.

Huawei 3KVA Power Module Inverter + 5kWh Battery

4,500,000.00
24 people are viewing this right now
Estimated Delivery:
14 - 21 Oct, 2025
Trust Badge
Guaranteed safe & secure checkout

Product details

The Huawei Power Module Inverter comes with one (5kwh battery) is an advanced, high-performance solution designed for efficient energy management in residential, commercial, and industrial applications. Engineered with versatility, reliability, and durability in mind, this energy storage system integrates seamlessly with renewable energy sources, offering robust energy storage, backup power, and grid independence. Its modular design and flexible installation options ensure adaptability to diverse needs while maintaining optimal performance.

Basic Parameters
Dimensions (W * H * D)
Single power module: 700 mm x 246 mm x 152 mm
Single battery module: 700mm x 390 mm x 158 mm
Base (mandatory for floor installation): 700 mm x 65 mm x 147 mm
Base (mandatory for wall-mounted installation): 643 mm x 110 mm x 176 mm
Weight Approx. 17 kg for a single power module
Approx.50 kg for a single energy storage module
Installation Mode Wall-mounted/ground-mounted
Degree of protection IP66
AC input
Input voltage 200/208/220/230/240V AC
Input current Max. 30 A
Frequency 50/60Hz
Maximum bypass input power 6kW
Lightning protection Differential mode: 3KA; common mode (two-wire pair PE): 5KA; 8/20 μs
SOLAR.HUAWEI.COM/EU/
1. Test conditions: 100% depth of discharge (DoD), 0.2C rate charge & discharge at 25℃, at the beginning of life. If no PV modules are installed or the system has not detected sunlight for at least 24 hours, the minimum end of
discharge SOC is 15%.
2. The weight of the battery module is subject to the actual product, with a tolerance of ±3%
3. Refer to battery warranty letter for conditional application.
4. Improper storage system installation may compromise product warranty and operation safety. Please follow the user manual during the installation, use, and maintenance of the storage system.
5. Noise Level(Typical):<29 dB(A) @1m, 30℃, Power On and Run Stably for 2 Hours
PV input
MPPT voltage range 90-420V DC
Maximum input capacity of the MPPT 5.5kWp
PV string quantity 2 strings
Number of MPPT channels 1 channel
Maximum input current for one string 12.5A
Maximum short circuit current for one string 18A
Lightning protection Complies with EN/IEC 61643-11 TYPE II
AC output
Output voltage system Single-phase 200/208/220/230/240V AC. The default value is 220V AC
Output frequency 50/60 Hz. The default value is 50 Hz.
Maximum output current 30A
Output power 6kVA/5kW
Power factor 0.8
Overload capacity
102% ≤ Load ≤ 125% 30s
125% < Load ≤ 150% 10s
>150%/short circuit 0.3s
Battery parameters
Rated capacity 5 kWh per module
Maximum capacity
Single system scenario: max. support 6 pcs batteries, 5 kW output (5Kw@30kWh)
Parallel system scenarios: max. 3 power modules can be paralleled. Each power module supports max. 3
batteries (15Kw@45kWh)
Maximum output/input power 2.5 kW per module
AC parallel box
Dimensions (W * H * D) 350 mm x 450 mm x 150 mm
Weight Approx. 12 kg
Input voltage 200/208/220/230/240 V AC. The default value is 220 V AC.
Input current Maximum 90A
Output voltage 200/208/220/230/240 V AC. The default value is 220 V AC.
Output current Max. 90A
Cable outlet mode Bottom in and bottom out
Installation Mode Wall-mounted or pole-mounted installation
Degree of protection IP55
Environmental parameters
Operating temperature 0°C to 45°C (without +1120w/m^2 solar radiation)
Transport temperature – 40°C -+ 70°C
Storage temperature – 40°C -+ 70°C
Relative humidity 5%-95% (RH)
Altitude Requirements 0~4000m (The operating temperature decreases by 1°C per 200m when the altitude is 2000 m to 4000

Quick Comparison

Huawei 3KVA Power Module Inverter + 5kWh Battery removePrag 4kva 48v Pure Sinewave Inverter-Wall Mount removeMercury 8kva Off Grid Hybrid Solar Inverter 48v, MPPT removeiPowerplus 200Ah/12V Inverter Battery removeiPower XMAX Inverter 3KVA/3KW/80Amp Axpert VMII Premium -24VDC removeMercury 200AH, 12V GEL Inverter Battery remove
NameHuawei 3KVA Power Module Inverter + 5kWh Battery removePrag 4kva 48v Pure Sinewave Inverter-Wall Mount removeMercury 8kva Off Grid Hybrid Solar Inverter 48v, MPPT removeiPowerplus 200Ah/12V Inverter Battery removeiPower XMAX Inverter 3KVA/3KW/80Amp Axpert VMII Premium -24VDC removeMercury 200AH, 12V GEL Inverter Battery remove
ImageHuawei 3KVA Power Module Inverter + 5kWh BatteryPrag 4kva 48v Pure Sinewave Inverter-Wall MountMercury 8kva Off Grid Hybrid Solar Inverter 48v, MPPTiPowerplus 200Ah/12V Inverter BatteryiPower XMAX Inverter 3KVA/3KW/80Amp Axpert VMII Premium -24VDCMercury 200AH, 12V GEL Inverter Battery
SKU
Rating
Price
4,500,000.00
968,000.00
1,780,000.00
370,000.00
475,000.00
470,000.00
Stock
20 in stock
20 in stock
20 in stock
Availability20 in stock20 in stock20 in stock
Add to cart

Description

Key Features

  1. Compact and Modular Design
  2. Superior Energy Storage
  3. High Power Output
  4. Solar and Grid Integration
  5. Durability and Safety
  6. Silent Operation
  7. Environmentally Resilient
  8. Energy Efficiency
  9. Comprehensive Installation Options

The Huawei Energy Storage System offers a reliable, scalable, and eco-friendly solution to meet diverse energy needs, ensuring consistent power delivery and sustainable energy management. Whether for residential backup, commercial energy optimization, or renewable energy integration, this system delivers unparalleled efficiency and performance.

PRAG 4KVA-48V H-Series (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today. PRAG 4KVA-48V H-Series features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.
  • Pure sine wave ;AC output delivers clean, safe power to run sensitive equipment. Voltage regulation in battery mode keeps output steady.
  • Built-in Wi-Fi for remote monitoring via mobile app (Android/iOS). USB, RS232, and RS485 ports allow communication with external devices like batteries.
  • >;Status LEDs clearly indicate system status. RGB lights show the power source (solar, grid, battery) and battery charge/discharge condition.
  • A robust design with a replaceable fan and anti-dust kit allows reliable operation in harsh environments.
  • Supports parallel operation to increase capacity up to 66,000W (up to 6 units).
  • >;Automatic transfer between solar, utility/generator, and battery power ensures uninterrupted supply.
200Ah/12V Inverter Battery
  • A smart battery charger that optimizes battery performance
  • Selectable charging current depending on the applications
  • Selectable input voltage range
  • Configurable solar/AC input priority
  • Auto restart while AC recovers
  • A perfect alarming system
  • Mercury Gel 12V 200AH Deep Cycle
  • Low self-discharge
  • High impact resistive plastic cast
  • Compact design and heavy duty grids
ContentThe Huawei Power Module Inverter comes with one (5kwh battery) is an advanced, high-performance solution designed for efficient energy management in residential, commercial, and industrial applications. Engineered with versatility, reliability, and durability in mind, this energy storage system integrates seamlessly with renewable energy sources, offering robust energy storage, backup power, and grid independence. Its modular design and flexible installation options ensure adaptability to diverse needs while maintaining optimal performance. Basic Parameters Dimensions (W * H * D) Single power module: 700 mm x 246 mm x 152 mm Single battery module: 700mm x 390 mm x 158 mm Base (mandatory for floor installation): 700 mm x 65 mm x 147 mm Base (mandatory for wall-mounted installation): 643 mm x 110 mm x 176 mm Weight Approx. 17 kg for a single power module Approx.50 kg for a single energy storage module Installation Mode Wall-mounted/ground-mounted Degree of protection IP66 AC input Input voltage 200/208/220/230/240V AC Input current Max. 30 A Frequency 50/60Hz Maximum bypass input power 6kW Lightning protection Differential mode: 3KA; common mode (two-wire pair PE): 5KA; 8/20 μs SOLAR.HUAWEI.COM/EU/ 1. Test conditions: 100% depth of discharge (DoD), 0.2C rate charge & discharge at 25℃, at the beginning of life. If no PV modules are installed or the system has not detected sunlight for at least 24 hours, the minimum end of discharge SOC is 15%. 2. The weight of the battery module is subject to the actual product, with a tolerance of ±3% 3. Refer to battery warranty letter for conditional application. 4. Improper storage system installation may compromise product warranty and operation safety. Please follow the user manual during the installation, use, and maintenance of the storage system. 5. Noise Level(Typical):<29 dB(A) @1m, 30℃, Power On and Run Stably for 2 Hours PV input MPPT voltage range 90-420V DC Maximum input capacity of the MPPT 5.5kWp PV string quantity 2 strings Number of MPPT channels 1 channel Maximum input current for one string 12.5A Maximum short circuit current for one string 18A Lightning protection Complies with EN/IEC 61643-11 TYPE II AC output Output voltage system Single-phase 200/208/220/230/240V AC. The default value is 220V AC Output frequency 50/60 Hz. The default value is 50 Hz. Maximum output current 30A Output power 6kVA/5kW Power factor 0.8 Overload capacity 102% ≤ Load ≤ 125% 30s 125% < Load ≤ 150% 10s >150%/short circuit 0.3s Battery parameters Rated capacity 5 kWh per module Maximum capacity Single system scenario: max. support 6 pcs batteries, 5 kW output (5Kw@30kWh) Parallel system scenarios: max. 3 power modules can be paralleled. Each power module supports max. 3 batteries (15Kw@45kWh) Maximum output/input power 2.5 kW per module AC parallel box Dimensions (W * H * D) 350 mm x 450 mm x 150 mm Weight Approx. 12 kg Input voltage 200/208/220/230/240 V AC. The default value is 220 V AC. Input current Maximum 90A Output voltage 200/208/220/230/240 V AC. The default value is 220 V AC. Output current Max. 90A Cable outlet mode Bottom in and bottom out Installation Mode Wall-mounted or pole-mounted installation Degree of protection IP55 Environmental parameters Operating temperature 0°C to 45°C (without +1120w/m^2 solar radiation) Transport temperature - 40°C -+ 70°C Storage temperature - 40°C -+ 70°C Relative humidity 5%-95% (RH) Altitude Requirements 0~4000m (The operating temperature decreases by 1°C per 200m when the altitude is 2000 m to 4000PRAG 4KVA-48V H-Series (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today. PRAG 4KVA-48V H-Series features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame. PRAG 4KVA – 48V Inverter Features
  • Powerful Pure Sine Wave (PSW) Inverter/Charger
  • 13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
  • High efficiency design and Power Saving Mode to conserve energy
  • 8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
  • 4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
  • 8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
  • 15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
  • Battery DOD (Depth of Discharge) setting from 50%
  • Easy and straightforward installation
  • Designed to operate under harsh environment
  • DC Start and Automatic Self Diagnostic (ASD) function
  • Compatible with Linear and Non-Linear loads
  • Low DC Voltage home and office appliances support
  • Up to 120Amp charging current selectable from 0%-100%
  • Battery priority mode for preferred UPS configuration
 
Inverter Output
Model PT-INV-4KVA 48V-Color LED, Wall-H
Continuous Output Power 3000W
Surge Rating(20s) 9000W
Capable of Starting Electric Motor 3HP
Output Waveform Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency >88%(Peak)
Line Mode Efficiency >95%
Power Factor 0.9-1.0
Nominal Output Voltage rms 220-230-240Vac
Output Voltage Regulation ±10% RMS
Output Frequency 50Hz ± 0.3Hz
Short Circuit Protection Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time 10ms(Max)
THD < 10%
DC Input
Nominal Input Voltage 12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Alarm 10.5Vdc/11.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Trip 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High Voltage Alarm & Fault 16.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High DC Input Recovery 15.5Vdc
Low Battery voltage recover 15.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Idle Consumption-Search Mode < 25 W when Power Saver On
Charge
Input Voltage Range Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC
Input Frequency Range Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz  | Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage Depends on battery type
Charger Breaker Rating 20A
Max Charge Rate 50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current) 4 step digital controlled progressive charge Battery types ( *2 for 24Vdc, *4 for 48Vdc)
Battery type Fast Vdc
Gel U.S.A 13.7
A.G.M 1 13.4
A.G.M 2 13.7
Sealed Lead Acid 13.6
Gel Euro 13.8
Open Lead Acid 13.3
Calcium 13.6
De-sulphation 15.5 for 4hrs
Remote Control Yes. Optional
Bypass & Protection
Input Voltage Waveform Sine wave (Grid or Generator)
Nominal Voltage 120Vac
Low Voltage Trip 184V/140V±4%
Low Voltage re engage 194V/150V±4%
High Voltage Trip 253V/270V±4%
High Voltage re engage 243V/260V±4%
Max Input AC Voltage 280VAC
Nominal Input Frequency 50Hz or 60Hz (Auto detect)
Low Freq Trip Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection Circuit breaker
Bypass breaker rating 30A
Transfer switch rating 30amp for UL
Max bypass current 30amp
Mechanical Specification
Mounting Wall mount
Inverter Dimensions(L*W*H) 388*3415*200mm
Inverter Weight 27KG
Shipping Dimensions(L*W*H) 550x320x310mm
Shipping Weight 29KG
Display Status LEDs / Status LEDs+LCD
Standard Warranty 1 Year
  • Pure sine wave ;AC output delivers clean, safe power to run sensitive equipment. Voltage regulation in battery mode keeps output steady.
  • Built-in Wi-Fi for remote monitoring via mobile app (Android/iOS). USB, RS232, and RS485 ports allow communication with external devices like batteries.
  • >;Status LEDs clearly indicate system status. RGB lights show the power source (solar, grid, battery) and battery charge/discharge condition.
  • A robust design with a replaceable fan and anti-dust kit allows reliable operation in harsh environments.
  • Supports parallel operation to increase capacity up to 66,000W (up to 6 units).
  • >;Automatic transfer between solar, utility/generator, and battery power ensures uninterrupted supply.

SPECIFICATIONS

Mercury 8KVA Specification Mercury 8kva Solar Charger and AC Charger
Power is stored in an inverter's battery bank in the state a battery is designed to store DC power and that is what the inverter converts and provides in a form your home appliances can use (AC power), when there is no public power supply available. This iPowerPlus Inverter battery is 200AH 12V. iPowerPlus inverters, certified batteries and smart solar options are already enjoying rave reviews from thousands of patrons who have bought and installed them in their homes and offices, with many emphasizing that the solutions have helped cut their monthly energy costs while at the same time proving to be a more efficient alternative to the erratic supply from the national grid.
Brand iPower
Warranty Period 1 Year
MODEL iPowerxMaX3000-24
RatedPower 3000VA/3000W
INPUT
Voltage 230VAC
SelectableVoltageRange 170-280VAC(ForPersonalComputers); 90- 280 VAC(ForHomeAppliances)
FrequencyRange 50Hz/60Hz(Autosensing)
OUTPUT
ACVoltageRegulation(Batt.Mode) 230VAC±5%
SurgePower 6000VA
Efficiency(Peak) 90%~93%
TransferTime 10ms(ForPersonalComputers);20ms(For HomeAppliances)
Waveform Puresinewave
BATTERY
BatteryVoltage 24VDC
FloatingChargeVoltage 27VDC
OverchargeProtection 32VDC
SOLARCHARGER&ACCHARGER
SolarChargerType MPPT
MaximumPVArrayOpenCircuitVoltage 450VDC
MaximumPVArrayPower 3000W
MPPRange@OperatingVoltage 60-400VDC
MaximumSolarChargeCurrent 80A
MaximumAC ChargeCurrent 80A
MaximumChargeCurrent 80A
PHYSICAL
Dimension,DxWxH(mm) 100x288x390
NetWeight(kgs) 8.0
CommunicationInterface RS232
ENVIRONMENT
Humidity 5%to95%RelativeHumidity(Non- condensing)
OperatingTemperature -10°Cto50°C
StorageTemperature -15°Cto60°C
This mercury 200AH Gel battery is a deep cycled sealed maintenance-free battery designed for inverters, telecommunication and other applications involving battery back-up need that involve continuous charging and discharging. To keep your inverter as well as business up and running‎,‎ you need the Mercury 200 AMP Battery to convert the direct current to alternating current which set the output voltage in 200 amp‎‎ that meets the specification of your household appliances‎‎‎.‎‎ Power is stored in this battery as it is designed to store rechargeable current and provides a flow of power to your inverter when there is no public power supply available‎‎‎.‎‎‎ This Mercury battery is 200AH 12V‎‎‎.‎‎‎ It is also a lead acid battery‎‎‎,‎‎‎ what this means is that it will use a reversible chemical reaction to store its energy‎‎‎.‎‎‎ It uses lead plates in a solution of sulphuric acid which generates electric energy‎‎‎.‎‎‎ This electric energy is then used to power the inverter‎‎ which offers you stable light to enjoy all through the day‎.‎‎‎ The Mercury battery is the best method to provide alternative power for a limited period‎‎ as it typically takes some hours to recharge‎‎‎.‎‎‎ Here are some of the reason why the battery is best for you‎‎‎;‎ it has a low maintenance cost and it is not expensive to buy‎‎ unlike running your home with a generator‎‎‎,‎‎‎ the inverter operation is so quiet‎‎ and‎ there will be  no form of noise pollution‎‎‎.‎‎‎ Another important thing is that this battery has exceptional charge retention and recovering ability and also environmental friendly‎.‎‎‎ It has the ability to withstand overcharge‎,‎ discharge efficiently and‎‎ is not affected by shocks and vibration‎‎‎.‎‎‎ The battery can last for many years of continuous use before needing replacement‎‎‎‎ which‎‎ makes it a good choice as a back‎-up power provider‎‎‎.‎ Features:
  • Leak-proof and sealed construction
  • Maintenance free
  • Compact design and heavy duty grids
  • Low self discharge
  • Wide operating temperature
  • High impact resistive plastic cast
  • 56.5kg weight
  • 225mm x 523mm x 240mm volume
WeightN/AN/AN/A50 kg8 kg56.5 kg
DimensionsN/AN/AN/AN/A100 × 288 × 390 cm225 × 523 × 240 cm
Additional information
Weight 50 kg
Weight 8 kg
Dimensions 100 × 288 × 390 cm
Weight 56.5 kg
Dimensions 225 × 523 × 240 cm
Sold000000
Shipping
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Add to cart
Click outside to hide the comparison bar
Compare