Don’t miss out great discount.

Mercury 10kVA 3-Phase Servo Stabilizer

925,000.00
24 people are viewing this right now
Estimated Delivery:
16 - 23 Oct, 2025
Trust Badge
Guaranteed safe & secure checkout

Product details

Mercury 10kVA 3-Phase Servo Stabilizer 277V-433V designed to automatically stabilize voltage output current using auto-transformer, servo motor and an automatic control circuit.  Highly adaptable to all kinds of non-linear loads such as capacitive and inductive loads.

Low, High, Fluctuating NEPA Voltage?

When NEPA voltage is unstable, the Mercury Servo Stabilizer stands between NEPA and your precious electrical appliances stabilizing and protecting: Air Conditioners, Servers, Desktop Computers, Elevators, Lifts, Medical Equipment, Fridges, Freezers etc.

Key Features
  • Phase: Three Phase + N + GNaD
  • Display Model: LED
  • Ring transformer structure, small footprint, minimum magnetic leakage, low noise
  • Multi-layer structure carbon brush with long service time and convenient daily maintenance
  • Voltage Protection – High / Low Voltage, High Temperature Protection
  • Soft Start Protection – Safeguards your expensive equipment
  • Ideal for heavy-duty equipment
Specifications

Capacity 10 KVA

AC INPUT

Voltage range 277 V ~ 433 V

Frequency range 50/60 Hz

Phase Three-phase+ N + G

AC OUTPUT

Voltage: 380 V / 400 V / 415 V

Voltage: regulation accuracy   ± 3%

Waveform:  Sinusoidal

Efficiency: 96%

Power factor: 0.8

Distortion: No additional waveform distortion

Response time: ± 10% varies< 1 s

Over-voltage protection: Output phase voltage 433 V ± 5 V

Under-voltage: Output phase voltage 316 V ± 5 V

Other protections: Start-up delay -mechanical failure -over-current -short-circuit -phase order (three-phase) -lack-phase (three-phase) -over temperature

OTHERS

Dimensions (W x D x H) (mm) : 240 x 410 x 370

Packaged dimensions W x D x H) (mm) 325 x 485 x 430

Net weight (kg) 27.3

Gross weight (kg) 28.5

Quick Comparison

Mercury 10kVA 3-Phase Servo Stabilizer removeMercury Maverick 650VA UPS removePRAG 200KVA 3-Phase Servo Voltage Stabilizer (304-456V) removeVertiv Liebert itON 1500VA E 230V IEC-IEC UPS removeVertiv Liebert itON 2000VA UPS removePrag 20kva 45-280v Relay Voltage Stabilizer remove
NameMercury 10kVA 3-Phase Servo Stabilizer removeMercury Maverick 650VA UPS removePRAG 200KVA 3-Phase Servo Voltage Stabilizer (304-456V) removeVertiv Liebert itON 1500VA E 230V IEC-IEC UPS removeVertiv Liebert itON 2000VA UPS removePrag 20kva 45-280v Relay Voltage Stabilizer remove
ImageMercury 10kVA 3-Phase Servo StabilizerMercury Maverick 650VA UPSPRAG 200KVA 3-Phase Servo Voltage Stabilizer (304-456V)Vertiv Liebert itON 1500VA E 230V IEC-IEC UPSVertiv Liebert itON 2000VA UPSPrag 20kva 45-280v Relay Voltage Stabilizer
SKU
Rating
Price
925,000.00
49,000.00
10,000,000.00
148,000.00
224,000.00
675,000.00
Stock
20 in stock
Out of stock
Out of stock
20 in stock
Availability20 in stockOut of stockOut of stock20 in stock
Add to cart

DescriptionMercury 10kVA 3-Phase Servo Stabilizer 277V-433V designed to automatically stabilize voltage output current using auto-transformer, servo motor and an automatic control circuit.  Highly adaptable to all kinds of non-linear loads such as capacitive and inductive loads.
  • 650va UPS
  • overlaod protection
  • Input Voltage: AC 175V-265V / 304V-456V
  • Output Voltage: AC 380V ± 3%, suitable for both 50Hz and 60Hz operations
  • Delay Time: Quick response with a short delay of 3-5 seconds
  • Comprehensive Protection: Equipped with safeguards against over voltage, overload, high temperature, and short circuits
  • Dimensions: Packing size of 95 cm x 72 cm x 159 cm facilitates easy transport.
  • Weight: Weighing 562 kg (gross), this regulator is built to last.
  • Automatic voltage regulator (AVR with boost and trim)
  • Compact size
  • Light weight
  • Easy operation
  • Overload protection and alarm
  • Auto re-start with AC recovery
  • Fast charging
  • Cold start function
  • Automatic voltage regulator (AVR with boost and trim)
  • Compact size
  • Light weight
  • Easy operation
  • Overload protection and alarm
  • Auto re-start with AC recovery
  • Fast Charging
  • Cold start function
  • Input Voltage Range (45V-280V)
  • Steady output voltage
  • Digital Control
  • Relay Control + Toroidal Transformer Technology
  • LED display
  • Low and Over voltage protection
  • Single Phase
ContentMercury 10kVA 3-Phase Servo Stabilizer 277V-433V designed to automatically stabilize voltage output current using auto-transformer, servo motor and an automatic control circuit.  Highly adaptable to all kinds of non-linear loads such as capacitive and inductive loads.
Low, High, Fluctuating NEPA Voltage?
When NEPA voltage is unstable, the Mercury Servo Stabilizer stands between NEPA and your precious electrical appliances stabilizing and protecting: Air Conditioners, Servers, Desktop Computers, Elevators, Lifts, Medical Equipment, Fridges, Freezers etc.
Key Features
  • Phase: Three Phase + N + GNaD
  • Display Model: LED
  • Ring transformer structure, small footprint, minimum magnetic leakage, low noise
  • Multi-layer structure carbon brush with long service time and convenient daily maintenance
  • Voltage Protection – High / Low Voltage, High Temperature Protection
  • Soft Start Protection – Safeguards your expensive equipment
  • Ideal for heavy-duty equipment
Specifications
Capacity 10 KVA
AC INPUT
Voltage range 277 V ~ 433 V Frequency range 50/60 Hz Phase Three-phase+ N + G
AC OUTPUT
Voltage: 380 V / 400 V / 415 V Voltage: regulation accuracy   ± 3% Waveform:  Sinusoidal Efficiency: 96% Power factor: 0.8 Distortion: No additional waveform distortion Response time: ± 10% varies< 1 s Over-voltage protection: Output phase voltage 433 V ± 5 V Under-voltage: Output phase voltage 316 V ± 5 V Other protections: Start-up delay -mechanical failure -over-current -short-circuit -phase order (three-phase) -lack-phase (three-phase) -over temperature
OTHERS
Dimensions (W x D x H) (mm) : 240 x 410 x 370 Packaged dimensions W x D x H) (mm) 325 x 485 x 430 Net weight (kg) 27.3 Gross weight (kg) 28.5
Ensure you charge this UPS for Minimum of 6 hrs before using it. Always on point with Mercury line of products. It has stood the test of times to be one of the leading makers of Line interactive backup ups for all applications. It has no dulling effect whatsoever. No need to get your desktop computer hard drive crashing or loosing your work when on the PC. No need having to loose your favorite TV program due to power failure and having to wait for minutes getting it back up again. This unit will sustain power until you put on your generator for continuity of use again. Mercury Maverick 650VA UPS features a Boost and buck AVR, three LED indicators for easy understanding and is fully digitized microprocessor controlled. Efficient and durable, Ideal for PC, TV, Sound system etc Backup now to protect your valuables from surge, brown outs and over voltages that might arise from your generator or public utility power. It is guaranteed that with the use of UPS for your gadgets, you have over a lifetime of us of your power devices. No more frequent purchases of that your laptop power adapter or Phone chargers. This UPS can be sure to protect your system from damage, especially an unpleasant crash when the power supply suddenly fails. Being able to achieve this protection with a relatively inexpensive uninterruptible power supply unit is certainly a benefit you should take advantage of. What's more, you prevent loss of vital data and other digital resources that can result from sudden power outage, when there is no UPS backup.Technical Specifications:   Input voltage 220VAC Input frequency 50Hz Input phase Single phase Input socket With Fuse Cold Start (0 to 100% load) Press the ON/OFF switch Input range (220V) 140V-300V Rating output (VA). 650VA Rating output (W). 390W Rating output (W). Battery mode(simulated sine wave), AC mode (sine wave) Power factor 0.6 Rating voltage 220V Output range 220Vac-7%+15% ( in battary mode ) Rear Output Socket 2xUniversal - Battery backup Transfer time TYPICAL 4-8 ms Communication Interface NIL Rating frequency 50Hz Output Frequency Line-mode Synchronize with the Utility Battery mode 50 Hz±1Hz Output Frequency Line Mode Synchronize with the utility Short Circuit Protection Line Mode FUSE & firmware protection Battery Mode Software protection controlled by firmware Overload Protection Line Mode 110%+-5% (Go to fault mode after 5 minutes), 120%+-5% (Go to fault mode immediately) Battery Mode 110%+-5% (Shutdown after 5 minutes) 120%+-5% (Shut down immediately) Rating frequency 12V/4.5AH x 1 Backup Tim - Typical 10mins to 18mins (depending on load) Charge Current About 1A at normal mode Over Charge Protection >14.5V +/- 0.2V stop charging Weight 5.6kg +/- 0.3Kg Dimension 390x 145 x 220 (mm)The 200KVA 3-Phase Servo Voltage Regulator is a high-precision, cabinet-type voltage regulator designed to maintain stable voltage levels in a variety of demanding environments. This advanced regulator features an LCD digital display for easy monitoring and is built with a compensated structure for reliable voltage regulation. With a robust power capacity of 200000VA, it is engineered to handle substantial loads while delivering high-precision output.

Applications:

The 200KVA Servo Voltage Regulator is ideal for various industries, including:
  • Industrial and Mining Enterprises: Ensures stable voltage for machinery and operations
  • Printing and Machine Tools: Supports sensitive equipment requiring precise voltage levels
  • Telecommunications and Railways: Provides reliable power to critical communication systems
  • Construction Sites and Schools: Guarantees safe and stable voltage supply
  • Hospitals and Hotels: Essential for medical equipment and hospitality services
  • Defense and Scientific Research: Supports precision instruments and experimental devices
  • Elevators and Production Lines: Maintains operational efficiency and safety in automated systems
This 200KVA 3-Phase Servo Voltage Regulator is an essential solution for any application where voltage stability is critical. Its robust design and advanced features ensure that your equipment operates efficiently and reliably, minimizing downtime and enhancing productivity. Invest in power stability today and secure the longevity of your vital systems.
The Liebert itON 1500 VA is a reliable line interactive ups designed to protect desktops and standalone computing equipment. The Liebert itON comes with an automatic voltage regulator (AVR) to provide flexibility and reliability to computers and other sensitive electronic equipment. With its compact design and easy –to use controls, the Liebert itON offer sufficient autonomy to safely back up current tasks before shutting down the system.   LI32141CT21 is ideally suited for the following equipment:
  • Desktop PCs
  • Professional workstations
  • Small routers, bridges, and hubs
  • Point-of-sale terminals
  • Other sensitive electronics
Features
  • Equipment with boost and buck AVR to stabilize the input voltage
  • Microprocessor control guarantees high reliability
  • Provides AC overload protection
  • Auto-restart with AC recover
  • Compact size, lightweight
  • Fast charging
  • Off mode charging
  • Cold start function
  • Overload protection and alarm
  • USB communication port for monitoring and shutdown software (UX models only)
Top Benefits
  • Smart RS232/USB interface for power management
  • Excellent microprocessor control guarantees high reliability
  • AVR Boost and buck for voltage stabilization
  • Auto restart while AC is recovering
  • Simulated sine wave
  • Auto charging at Off-mode
  • Cold start function
  • Generator compatible
Key Specifications CAPACITY 1500 VA/900 Watt. INPUT
  • Voltage 220/230 VAC
  • INPUT Voltage Range 140-300 VAC
  • Frequency Range 50 Hz
OUTPUT
  • AC Voltage Regulation (Batt. Mode) ±10%
  • Frequency Range (Batt. Mode) 50 Hz ±1 Hz
  • Transfer Time Typical 2-6 ms
  • Waveform (Batt. Mode) Simulated Sine Wave
  • Overload 110% +/-10% Shutdown after 5 mins
BATTERY
  • Battery Type & Number 12 V/7 Ah x 2
  • Typical Recharge Time 6-8 hours up to 90% capacity
TRANSFER TIME Minimum line break for Typical 4-8 msec transfer to battery
Liebert® itON is a single-phase UPS with line-interactive technology, making it ideal for protecting desktop computers and standalone IT equipment while also prolonging battery life with the use of AVR technology. Designed with simple controls for easy operation, it makes user interaction simpler and more efficient. Liebert® itON is a reliable line-interactive UPS designed for the protection of desktop computers and standalone IT equipment. With its compact design and easy to use controls, it provides sufficient backup time in order to save work in progress and gracefully initiate system shutdowns.
  • Vertiv Liebert ItON 2000VA, Liebert.
  • Output power capacity: 2000 VA,
  • Output power: 1200 W,
  • Input operation voltage (min): 170 V.
  • AC outlet types: C13 coupler,
  • Type F, Power plug: C14 coupler,
  • AC outlets quantity: 6 AC outlet(s).
  • Battery technology: Sealed Lead Acid (VRLA),
  • Battery type: VRLA,
  • Battery recharge time: 6 h.
  • Form factor: Tower,
  • Product colour: Black,
  • International Protection (IP) code: IP20.
  • UPS topology: Line-Interactive, Response time: 6 ms, Waveform: Stepwise
Low, High, Fluctuating NEPA Voltage? One Central Stabilizer for your entire Flat, Home, Office, etc. Extreme Wide Input Voltage (45-280V) Stabilizer and Protect all electrical appliances in your premises: Air Conditioners, Fridges, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc. TMH45-20K Relay Automatic Voltage Stabilizer Series is based on digital technology; provides voltage stabilization and protection to appliances and equipment; designed as a central stabilizer to handle all house loads. Features
  • Input Voltage Range (45V-280V)
  • Steady output voltage
  • Digital Control
  • Relay Control + Toroidal Transformer Technology
  • LED display
  • Low and Over voltage protection
  • Single Phase
WeightN/A5.6 kgN/A5 kg5 kg40 kg
DimensionsN/A390 × 145 × 220 cmN/AN/AN/AN/A
Additional information
Weight 5.6 kg
Dimensions 390 × 145 × 220 cm
Weight 5 kg
Weight 5 kg
Weight 40 kg
Sold000000
Shipping
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Add to cart
Click outside to hide the comparison bar
Compare