Don’t miss out great discount.
New

Mercury 6KVA Inverter Pure Sine Wave MI 6500

820,000.00
21 people are viewing this right now
Estimated Delivery:
01 - 08 May, 2026
Trust Badge
Guaranteed safe & secure checkout

Product details

The Mercury 6KVA Pure Sine Wave with  UPS functionality is a generation ahead of the entire category. That’s because our break through chip embedded sine wave’ technology delivers the same current as you get from your mains. 

SPECIFICATIONS
MI 6500
System Rating (VA/W) 4000W
INPUT
Nominal Input Battery Voltage 48V 48V
Voltage Range 180 VAC – 265VAC ± 5 VAC (UPS Mode)
90 VAC – 280 VAC ± 10 VAC (NOR Mode)
BATTERY CHARGING
Grid Charging Current 12A, 18A (2 Modes)
MODES
UPS / Normal Via Switch (Back Side)
Charging Mode (FC/NC) Via Switch (Back Side)
Battery Selection NA Via Switch (Back Side)
OUTPUT
Wave Form Type Pure Sine Wave
Output Voltage 200VAC ± 10%
Output Frequency 50Hz ±.5 Hz
Overload Protection Provided at >100% with auto reset
Low Battery Protection Provided at 10.4V (per Battery) with auto reset
Short Circuit Protection Provided at 300% with manual reset
Over Temperature Protection Provided at 85° C
CHANGE OVER TIME
UPS Mode 12 miliseconds
Normal Mode 50 miliseconds
BATTERY
Boost Voltage 14.4 VDC ± 0.2VDC TT Mode: 14.6 VDC ± 0.2 VDC
FT Mode: 14.2 VDC ± 0.2 VDC
Float Voltage 13.5 VDC ± 0.2VDC TT Mode: 13.8 VDC ± 0.2 VDC
FT Mode: 13.5 VDC ± 0.2 VDC
Low Battery Cut 10.4 VDC ± 0.2 VDC
Battery Type 12V (100Ah to 200Ah)
ENVIRONMENT
Forced Cooling Through Cooling Fan
Humidity 0-90% Non Condensing
Operating & Storage Temperature 0-45° C
DISPLAY
Display Type LCD
LED NA
LCD Status: Mains Voltage, Output(Load) Voltage, Battery Voltage,
Charging Current, Discharging Current, Load Percentage,
Battery Charging/ Charged, Charging Mode, Battery Mode
Protection: Mains Hi / Low, Mains Fuse / MCB Trip, Over Temp,
Short Circuit, Battery Low Trip, Overload Trip

Quick Comparison

Mercury 6KVA Inverter Pure Sine Wave MI 6500 removeMercury 1.5kva Off Grid Hybrid Solar Inverter 12v, MPPT removeiPower XMAX Inverter 3KVA/3KW/80Amp Axpert VMII Premium -24VDC removeiPower Infiniti 5KVA/ 48VDC removePrag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT removePrag 4kva 48v Pure Sinewave Inverter-Wall Mount remove
NameMercury 6KVA Inverter Pure Sine Wave MI 6500 removeMercury 1.5kva Off Grid Hybrid Solar Inverter 12v, MPPT removeiPower XMAX Inverter 3KVA/3KW/80Amp Axpert VMII Premium -24VDC removeiPower Infiniti 5KVA/ 48VDC removePrag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT removePrag 4kva 48v Pure Sinewave Inverter-Wall Mount remove
ImageMercury 6KVA Inverter Pure Sine Wave MI 6500Mercury 1.5kva Off Grid Hybrid Solar Inverter 12v, MPPTiPower XMAX Inverter 3KVA/3KW/80Amp Axpert VMII Premium -24VDCiPower Infiniti 5KVA/ 48VDCPrag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VTPrag 4kva 48v Pure Sinewave Inverter-Wall Mount
SKU
Rating
Price
820,000.00
345,000.00
475,000.00
1,170,000.00
2,700,000.00
968,000.00
Stock
20 in stock
20 in stock
Availability20 in stock20 in stock
Add to cart

DescriptionFEATURES:
  • DSP Technology for fast & smooth charging
  • Auto sense intelligent charging (ASIC) adjustment
  • Highly robust & reliable Ideal for computer
  • Generator Compatible
  • Wide charging voltage range
  • User selectable charging current
  • Compact design
  • Input range 180VAC to 265VAC UPS Mode
  • Input range 100VAC to 280VAC Normal Mode
  • DC Voltage - 48V
  • Charge current <15 A
Mercury 1.5KVA Solar Hybrid Inverter MPPT 12V Complete Inverter System. Engineered with cutting-edge technology and advanced features, this inverter system is your go-to solution for all your solar energy needs.
  • A smart battery charger that optimizes battery performance
  • Selectable charging current depending on the applications
  • Selectable input voltage range
  • Configurable solar/AC input priority
  • Auto restart while AC recovers
  • A perfect alarming system
  • 5KVA.48V
  • PV Array: 9000W
PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.PRAG 4KVA-48V H-Series (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today. PRAG 4KVA-48V H-Series features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.
Content
The Mercury 6KVA Pure Sine Wave with  UPS functionality is a generation ahead of the entire category. That’s because our break through chip embedded sine wave’ technology delivers the same current as you get from your mains. 
SPECIFICATIONS MI 6500 System Rating (VA/W) 4000W INPUT Nominal Input Battery Voltage 48V 48V Voltage Range 180 VAC – 265VAC ± 5 VAC (UPS Mode) 90 VAC – 280 VAC ± 10 VAC (NOR Mode) BATTERY CHARGING Grid Charging Current 12A, 18A (2 Modes) MODES UPS / Normal Via Switch (Back Side) Charging Mode (FC/NC) Via Switch (Back Side) Battery Selection NA Via Switch (Back Side) OUTPUT Wave Form Type Pure Sine Wave Output Voltage 200VAC ± 10% Output Frequency 50Hz ±.5 Hz Overload Protection Provided at >100% with auto reset Low Battery Protection Provided at 10.4V (per Battery) with auto reset Short Circuit Protection Provided at 300% with manual reset Over Temperature Protection Provided at 85° C CHANGE OVER TIME UPS Mode 12 miliseconds Normal Mode 50 miliseconds BATTERY Boost Voltage 14.4 VDC ± 0.2VDC TT Mode: 14.6 VDC ± 0.2 VDC FT Mode: 14.2 VDC ± 0.2 VDC Float Voltage 13.5 VDC ± 0.2VDC TT Mode: 13.8 VDC ± 0.2 VDC FT Mode: 13.5 VDC ± 0.2 VDC Low Battery Cut 10.4 VDC ± 0.2 VDC Battery Type 12V (100Ah to 200Ah) ENVIRONMENT Forced Cooling Through Cooling Fan Humidity 0-90% Non Condensing Operating & Storage Temperature 0-45° C DISPLAY Display Type LCD LED NA LCD Status: Mains Voltage, Output(Load) Voltage, Battery Voltage, Charging Current, Discharging Current, Load Percentage, Battery Charging/ Charged, Charging Mode, Battery Mode Protection: Mains Hi / Low, Mains Fuse / MCB Trip, Over Temp, Short Circuit, Battery Low Trip, Overload Trip
Mercury 1.5KVA Solar Hybrid Inverter MPPT 12V Complete Inverter System. Engineered with cutting-edge technology and advanced features, this inverter system is your go-to solution for all your solar energy needs.

Key Features and Benefits

  • Maximum Power Point Tracking (MPPT): This technology optimizes your solar panel’s output, enhancing your system’s overall efficiency.
  • Automatic Switch-Over Function: Experience uninterrupted power supply with the auto switch-over feature that toggles between solar and grid power sources during power outages.
  • User-Friendly LCD Display: Real-time system performance and status are displayed, ensuring you’re always in the know.
  • Safety First: Equipped with multiple safety features to protect your appliances and give you peace of mind.
  • High-Quality Mercury Deep Cycle GEL Batteries: Comes with a Mercury Deep Cycle GEL battery that guarantees optimal performance and reliability.
  • Expert Installation and After-Sales Support: Our professional team will handle the installation and offer prompt after-sales support.
  • 7-Day Money-Back Guarantee and 12-Month Warranty: Your investment is safe with us. If you’re not satisfied, you can return the product within 7 days for a full refund.
  • Eco-Friendly and Cost-Effective: Reduce your carbon footprint and save on energy bills with this efficient inverter system.
Brand iPower
Warranty Period 1 Year
MODEL iPowerxMaX3000-24
RatedPower 3000VA/3000W
INPUT
Voltage 230VAC
SelectableVoltageRange 170-280VAC(ForPersonalComputers); 90- 280 VAC(ForHomeAppliances)
FrequencyRange 50Hz/60Hz(Autosensing)
OUTPUT
ACVoltageRegulation(Batt.Mode) 230VAC±5%
SurgePower 6000VA
Efficiency(Peak) 90%~93%
TransferTime 10ms(ForPersonalComputers);20ms(For HomeAppliances)
Waveform Puresinewave
BATTERY
BatteryVoltage 24VDC
FloatingChargeVoltage 27VDC
OverchargeProtection 32VDC
SOLARCHARGER&ACCHARGER
SolarChargerType MPPT
MaximumPVArrayOpenCircuitVoltage 450VDC
MaximumPVArrayPower 3000W
MPPRange@OperatingVoltage 60-400VDC
MaximumSolarChargeCurrent 80A
MaximumAC ChargeCurrent 80A
MaximumChargeCurrent 80A
PHYSICAL
Dimension,DxWxH(mm) 100x288x390
NetWeight(kgs) 8.0
CommunicationInterface RS232
ENVIRONMENT
Humidity 5%to95%RelativeHumidity(Non- condensing)
OperatingTemperature -10°Cto50°C
StorageTemperature -15°Cto60°C
iPower Infiniti 5KVA/48V Inverter PV Array:9000W iPowerPlus Inverters are digital smart power solutions which range from 1KVA-20KVA. The Pure Sine Wave Hybrid Inverter comes with an in-built solar charge controller that connects automatically to solar and utility supply. This allows you to switch between AC Power and Solar Power
  • Rated Output Power 5000VA/4000W
  • Maximum PV Array Power 9000W
  • MPPT Voltage Range 60-115 VDC
  • Dimension 194 x 295 x 455
  • Weight 17kg
  • Maximum Charging Current 140
PRAG 10KVA 48V INVERTER W-EY (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today. PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame. PRAG 10KVA 48V INVERTER Features
  • Powerful Pure Sine Wave (PSW) Inverter/Charger
  • 13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
  • High efficiency design and Power Saving Mode to conserve energy
  • 8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
  • 4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
  • 8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
  • 15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
  • Battery DOD (Depth of Discharge) setting from 50%
  • Easy and straightforward installation
  • Designed to operate under harsh environment
  • DC Start and Automatic Self Diagnostic (ASD) function
  • Compatible with Linear and Non-Linear loads
  • Low DC Voltage home and office appliances support
  • Up to 120Amp charging current selectable from 0%-100%
  • Battery priority mode for preferred UPS configuration
 
Inverter Output
Model PT-INV-10KVA/9000W 48V-Color LED, Wall-H
Continuous Output Power 9000W
Surge Rating(20s) 24000W
Capable of Starting Electric Motor 8HP
Output Waveform Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency >88%(Peak)
Line Mode Efficiency >95%
Power Factor 0.9-1.0
Nominal Output Voltage rms  220-230-240Vac
Output Voltage Regulation ±10% RMS
Output Frequency 50± 0.3Hz/60± 0.3Hz
Short Circuit Protection Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time 10ms(Max)
THD < 10%
DC Input
Nominal Input Voltage 12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Alarm 10.5Vdc/11.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Trip 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High Voltage Alarm & Fault 16.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High DC Input Recovery 15.5Vdc
Low Battery voltage recover 15.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Idle Consumption-Search Mode < 25 W when Power Saver On
Charge
Input Voltage Range Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC
Input Frequency Range Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage Depends on battery type
Charger Breaker Rating 40A
Max Charge Rate 50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current) 4 step digital controlled progressive charge Battery types ( *2 for 24Vdc, *4 for 48Vdc)
Battery type Float Vdc
Gel U.S.A 13.7
A.G.M 1 13.4
A.G.M 2 13.7
Sealed Lead Acid 13.6
Gel Euro 13.8
Open Lead Acid 13.3
Calcium 13.6
De-sulphation 15.5 for 4hrs
Remote Control Yes. Optional
Bypass & Protection
Input Voltage Waveform Sine wave (Grid or Generator)
Nominal Voltage 220Vac
Low Voltage Trip 184V/140V±4%
Low Voltage re engage 194V/150V±4%
High Voltage Trip 253V/270V±4%
High Voltage re engage 243V/260V±4%
Max Input AC Voltage 280VAC
Nominal Input Frequency 50Hz or 60Hz (Auto detect)
Low Freq Trip Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection Circuit breaker
Bypass breaker rating 63A
Transfer switch rating 80amp for UL
Max bypass current 80amp
Mechanical Specification
Mounting Wall mount
Inverter Dimensions(L*W*H) 588*415*200mm
Inverter Weight 66KG
Shipping Dimensions(L*W*H) 750x520x310mm
Shipping Weight 68KG
Display Status LEDs / Status LEDs+LCD
Standard Warranty 1 Year
PRAG 4KVA-48V H-Series (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today. PRAG 4KVA-48V H-Series features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame. PRAG 4KVA – 48V Inverter Features
  • Powerful Pure Sine Wave (PSW) Inverter/Charger
  • 13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
  • High efficiency design and Power Saving Mode to conserve energy
  • 8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
  • 4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
  • 8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
  • 15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
  • Battery DOD (Depth of Discharge) setting from 50%
  • Easy and straightforward installation
  • Designed to operate under harsh environment
  • DC Start and Automatic Self Diagnostic (ASD) function
  • Compatible with Linear and Non-Linear loads
  • Low DC Voltage home and office appliances support
  • Up to 120Amp charging current selectable from 0%-100%
  • Battery priority mode for preferred UPS configuration
 
Inverter Output
Model PT-INV-4KVA 48V-Color LED, Wall-H
Continuous Output Power 3000W
Surge Rating(20s) 9000W
Capable of Starting Electric Motor 3HP
Output Waveform Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency >88%(Peak)
Line Mode Efficiency >95%
Power Factor 0.9-1.0
Nominal Output Voltage rms 220-230-240Vac
Output Voltage Regulation ±10% RMS
Output Frequency 50Hz ± 0.3Hz
Short Circuit Protection Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time 10ms(Max)
THD < 10%
DC Input
Nominal Input Voltage 12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Alarm 10.5Vdc/11.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Trip 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High Voltage Alarm & Fault 16.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High DC Input Recovery 15.5Vdc
Low Battery voltage recover 15.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Idle Consumption-Search Mode < 25 W when Power Saver On
Charge
Input Voltage Range Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC
Input Frequency Range Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz  | Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage Depends on battery type
Charger Breaker Rating 20A
Max Charge Rate 50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current) 4 step digital controlled progressive charge Battery types ( *2 for 24Vdc, *4 for 48Vdc)
Battery type Fast Vdc
Gel U.S.A 13.7
A.G.M 1 13.4
A.G.M 2 13.7
Sealed Lead Acid 13.6
Gel Euro 13.8
Open Lead Acid 13.3
Calcium 13.6
De-sulphation 15.5 for 4hrs
Remote Control Yes. Optional
Bypass & Protection
Input Voltage Waveform Sine wave (Grid or Generator)
Nominal Voltage 120Vac
Low Voltage Trip 184V/140V±4%
Low Voltage re engage 194V/150V±4%
High Voltage Trip 253V/270V±4%
High Voltage re engage 243V/260V±4%
Max Input AC Voltage 280VAC
Nominal Input Frequency 50Hz or 60Hz (Auto detect)
Low Freq Trip Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection Circuit breaker
Bypass breaker rating 30A
Transfer switch rating 30amp for UL
Max bypass current 30amp
Mechanical Specification
Mounting Wall mount
Inverter Dimensions(L*W*H) 388*3415*200mm
Inverter Weight 27KG
Shipping Dimensions(L*W*H) 550x320x310mm
Shipping Weight 29KG
Display Status LEDs / Status LEDs+LCD
Standard Warranty 1 Year
WeightN/AN/A8 kg17 kgN/AN/A
DimensionsN/AN/A100 × 288 × 390 cmN/AN/AN/A
Additional information
Weight 8 kg
Dimensions 100 × 288 × 390 cm
Weight 17 kg
Sold000000
Shipping
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Add to cart
Click outside to hide the comparison bar
Compare