Don’t miss out great discount.

Prag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT

2,700,000.00
21 people are viewing this right now
Estimated Delivery:
15 - 22 Oct, 2025
Trust Badge
Guaranteed safe & secure checkout

Product details

PRAG 10KVA 48V INVERTER W-EY (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today.

PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.

PRAG 10KVA 48V INVERTER Features

  • Powerful Pure Sine Wave (PSW) Inverter/Charger
  • 13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
  • High efficiency design and Power Saving Mode to conserve energy
  • 8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
  • 4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
  • 8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
  • 15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
  • Battery DOD (Depth of Discharge) setting from 50%
  • Easy and straightforward installation
  • Designed to operate under harsh environment
  • DC Start and Automatic Self Diagnostic (ASD) function
  • Compatible with Linear and Non-Linear loads
  • Low DC Voltage home and office appliances support
  • Up to 120Amp charging current selectable from 0%-100%
  • Battery priority mode for preferred UPS configuration

 

Inverter Output
Model PT-INV-10KVA/9000W 48V-Color LED, Wall-H
Continuous Output Power 9000W
Surge Rating(20s) 24000W
Capable of Starting Electric Motor 8HP
Output Waveform Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency >88%(Peak)
Line Mode Efficiency >95%
Power Factor 0.9-1.0
Nominal Output Voltage rms  220-230-240Vac
Output Voltage Regulation ±10% RMS
Output Frequency 50± 0.3Hz/60± 0.3Hz
Short Circuit Protection Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time 10ms(Max)
THD < 10%
DC Input
Nominal Input Voltage 12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Alarm 10.5Vdc/11.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Trip 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High Voltage Alarm & Fault 16.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High DC Input Recovery 15.5Vdc
Low Battery voltage recover 15.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Idle Consumption-Search Mode < 25 W when Power Saver On
Charge
Input Voltage Range Wide: 90~135VAC / 164~243VAC
Narraw: 100~135VAC / 194~243VAC
Input Frequency Range Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage Depends on battery type
Charger Breaker Rating 40A
Max Charge Rate 50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current)
4 step digital controlled progressive charge
Battery types ( *2 for 24Vdc, *4 for 48Vdc)
Battery type Float Vdc
Gel U.S.A 13.7
A.G.M 1 13.4
A.G.M 2 13.7
Sealed Lead Acid 13.6
Gel Euro 13.8
Open Lead Acid 13.3
Calcium 13.6
De-sulphation 15.5 for 4hrs
Remote Control Yes. Optional
Bypass & Protection
Input Voltage Waveform Sine wave (Grid or Generator)
Nominal Voltage 220Vac
Low Voltage Trip 184V/140V±4%
Low Voltage re engage 194V/150V±4%
High Voltage Trip 253V/270V±4%
High Voltage re engage 243V/260V±4%
Max Input AC Voltage 280VAC
Nominal Input Frequency 50Hz or 60Hz (Auto detect)
Low Freq Trip Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz
Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz
Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz
Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz
Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection Circuit breaker
Bypass breaker rating 63A
Transfer switch rating 80amp for UL
Max bypass current 80amp
Mechanical Specification
Mounting Wall mount
Inverter Dimensions(L*W*H) 588*415*200mm
Inverter Weight 66KG
Shipping Dimensions(L*W*H) 750x520x310mm
Shipping Weight 68KG
Display Status LEDs / Status LEDs+LCD
Standard Warranty 1 Year

Quick Comparison

Prag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT removeMercury VM 2.4kva/24v Off Grid Hybrid Solar Inverter removeiPowerplus 200Ah/12V Inverter Battery removeMercury 3.5kva Off Grid Hybrid Solar Inverter 24v, MPPT removePrag 3.6kw Plus Solar Inverter removePrag 4kva 48v Pure Sinewave Inverter-Wall Mount remove
NamePrag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT removeMercury VM 2.4kva/24v Off Grid Hybrid Solar Inverter removeiPowerplus 200Ah/12V Inverter Battery removeMercury 3.5kva Off Grid Hybrid Solar Inverter 24v, MPPT removePrag 3.6kw Plus Solar Inverter removePrag 4kva 48v Pure Sinewave Inverter-Wall Mount remove
ImagePrag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VTMercury VM 2.4kva/24v Off Grid Hybrid Solar InverteriPowerplus 200Ah/12V Inverter BatteryMercury 3.5kva Off Grid Hybrid Solar Inverter 24v, MPPTPrag 3.6kw Plus Solar InverterPrag 4kva 48v Pure Sinewave Inverter-Wall Mount
SKU
Rating
Price
2,700,000.00
396,000.00
370,000.00
630,000.00
1,195,000.00
968,000.00
Stock
20 in stock
20 in stock
Availability20 in stock20 in stock
Add to cart

DescriptionPRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.
  • 2.4Kva Off Grid Hybrid Solar Inverter 24v
  • Pure Sinewave with MPPT Voltage range 120 ~ 430VCD
  • Max SCC 80A
200Ah/12V Inverter Batteryhe Mercury 3.5KVA (M3500)Pure Sine Wave with  UPS functionality is a generation ahead of the entire category. That’s because our breakthrough chip embedded sine wave’ technology delivers the same current as you get from your mains.
  • Digital Display
  • Pure sine Wave
  • Inverter
  • 4.3” Touchscreen LCD
  • Pure Sine wave Solar Inverter
  • Built-in Wi-Fi for mobile monitoring (Android/iOS App available)
  • Built In MPPT Solar Charge Controller: String/High PV (450V DC)
PRAG 4KVA-48V H-Series (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today. PRAG 4KVA-48V H-Series features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.
ContentPRAG 10KVA 48V INVERTER W-EY (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today. PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame. PRAG 10KVA 48V INVERTER Features
  • Powerful Pure Sine Wave (PSW) Inverter/Charger
  • 13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
  • High efficiency design and Power Saving Mode to conserve energy
  • 8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
  • 4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
  • 8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
  • 15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
  • Battery DOD (Depth of Discharge) setting from 50%
  • Easy and straightforward installation
  • Designed to operate under harsh environment
  • DC Start and Automatic Self Diagnostic (ASD) function
  • Compatible with Linear and Non-Linear loads
  • Low DC Voltage home and office appliances support
  • Up to 120Amp charging current selectable from 0%-100%
  • Battery priority mode for preferred UPS configuration
 
Inverter Output
Model PT-INV-10KVA/9000W 48V-Color LED, Wall-H
Continuous Output Power 9000W
Surge Rating(20s) 24000W
Capable of Starting Electric Motor 8HP
Output Waveform Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency >88%(Peak)
Line Mode Efficiency >95%
Power Factor 0.9-1.0
Nominal Output Voltage rms  220-230-240Vac
Output Voltage Regulation ±10% RMS
Output Frequency 50± 0.3Hz/60± 0.3Hz
Short Circuit Protection Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time 10ms(Max)
THD < 10%
DC Input
Nominal Input Voltage 12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Alarm 10.5Vdc/11.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Trip 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High Voltage Alarm & Fault 16.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High DC Input Recovery 15.5Vdc
Low Battery voltage recover 15.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Idle Consumption-Search Mode < 25 W when Power Saver On
Charge
Input Voltage Range Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC
Input Frequency Range Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage Depends on battery type
Charger Breaker Rating 40A
Max Charge Rate 50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current) 4 step digital controlled progressive charge Battery types ( *2 for 24Vdc, *4 for 48Vdc)
Battery type Float Vdc
Gel U.S.A 13.7
A.G.M 1 13.4
A.G.M 2 13.7
Sealed Lead Acid 13.6
Gel Euro 13.8
Open Lead Acid 13.3
Calcium 13.6
De-sulphation 15.5 for 4hrs
Remote Control Yes. Optional
Bypass & Protection
Input Voltage Waveform Sine wave (Grid or Generator)
Nominal Voltage 220Vac
Low Voltage Trip 184V/140V±4%
Low Voltage re engage 194V/150V±4%
High Voltage Trip 253V/270V±4%
High Voltage re engage 243V/260V±4%
Max Input AC Voltage 280VAC
Nominal Input Frequency 50Hz or 60Hz (Auto detect)
Low Freq Trip Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection Circuit breaker
Bypass breaker rating 63A
Transfer switch rating 80amp for UL
Max bypass current 80amp
Mechanical Specification
Mounting Wall mount
Inverter Dimensions(L*W*H) 588*415*200mm
Inverter Weight 66KG
Shipping Dimensions(L*W*H) 750x520x310mm
Shipping Weight 68KG
Display Status LEDs / Status LEDs+LCD
Standard Warranty 1 Year

FEATURES

  • Pure sine wave inverter & ECO friendly
  • Configurable input voltage range for home appliances and personal computers.
  • Configurable battery charging current based on applications via LCD setting.
  • Configurable AC/Solar Charger priority.
  • Compatible to mains voltage or Generator power.
  • Auto restart while AC is recovering & Cold start function.
  • Overload/ Over temperature & Short circuit protection.
  • Smart battery charger design for optimized battery performance
Mercury-2.4KVA-Solar-Hybrid-Inverter Mercury 2.4kva Solar Hybrid Inverter Mode Mercury 2.4kva Solar Hybrid Charging Mode    
Power is stored in an inverter's battery bank in the state a battery is designed to store DC power and that is what the inverter converts and provides in a form your home appliances can use (AC power), when there is no public power supply available. This iPowerPlus Inverter battery is 200AH 12V. iPowerPlus inverters, certified batteries and smart solar options are already enjoying rave reviews from thousands of patrons who have bought and installed them in their homes and offices, with many emphasizing that the solutions have helped cut their monthly energy costs while at the same time proving to be a more efficient alternative to the erratic supply from the national grid.The Mercury 3.5KVA (M3500)Pure Sine Wave with  UPS functionality is a generation ahead of the entire category. That’s because our breakthrough chip embedded sine wave’ technology delivers the same current as you get from your mains.  The distinguishing features of this Mercury 3.5KVA inverter Pure Sine Wave are:
  • DSP technology for fast & smooth charging
  • Auto Sense intelligent charging (ASIC) adjustment
  • Highly robust & reliable ideal for computers
  • User selectable charging current
  • Wide charging voltage range
  • Low battery Warning
  • Overload warning
  • Main fuse blown protection
  • Short circuit protection
Specification Mercury 3.5kva Inverter Specification Voltage Range 180 VAC – 265VAC ± 5 VAC (UPS Mode) 100 VAC – 280 VAC ± 15 VAC (NOR Mode) Line Low Detection 180V ± 5V (UPS Mode) / 100V ± 15V (NOR Mode) Line Low Comeback 190V ± 5V (UPS Mode) / 110V ± 10V (NOR Mode) Line Low Detection 265V ± 5V (UPS Mode) / 280V ± 15V (NOR Mode) Line Low Comeback 255V ± 5V (UPS Mode) / 270V ± 10V (NOR Mode) Frequency Transfer Input Frequency 45-55 Hz Characteristics (AC) Inverter Full Load Power 2800 Power Factor 0.8 factor (on resistive load) On-Line Mode Sine Wave Battery Mode Sine Wave On-Line Output voltage Follow the Line Voltage Battery Mode Output Voltage 200 VAC ± 10% Transfer Time (No-Load) <15 ms The frequency at Battery Mode 50 Hz ± 1 Hz Characteristics (DC) DC Supply Voltage 48V Battery Floating Charge Voltage 54.0 VDC ± 0.8 VDC Charge Current <15 A Battery Voltage Low Alarm 42.4 VDC ± 0.8 VDC Battery Discharge Protection 41.6 VDC ± 0.4 VDC Over Charge Protection > 60.0 VDC ± 0.8 VDC  
3.6KW-24V (4000W MPPT) Solar Inverter Features
  • Pure Sine wave Solar Inverter
  • Inbuilt MPPT Solar Charger
  • Customizable status LED ring with RGB lights
  • Touchable button with large 4.3 colored LCD
  • Built-in WiFi for mobile monitoring (Android/iOS App available)
  • Supports USB On-the-Go function
  • Data log events stored in the Inverter
  • Reserved communication port (RS485, CAN-BUS or RS232) for BMS
  • Battery independent design
  • Battery equalization extends lifecycle
  • User-friendly LCD operation
  • Enhanced charging power
  • Optional anti-dusk kit
PRAG 4KVA-48V H-Series (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today. PRAG 4KVA-48V H-Series features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame. PRAG 4KVA – 48V Inverter Features
  • Powerful Pure Sine Wave (PSW) Inverter/Charger
  • 13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
  • High efficiency design and Power Saving Mode to conserve energy
  • 8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
  • 4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
  • 8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
  • 15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
  • Battery DOD (Depth of Discharge) setting from 50%
  • Easy and straightforward installation
  • Designed to operate under harsh environment
  • DC Start and Automatic Self Diagnostic (ASD) function
  • Compatible with Linear and Non-Linear loads
  • Low DC Voltage home and office appliances support
  • Up to 120Amp charging current selectable from 0%-100%
  • Battery priority mode for preferred UPS configuration
 
Inverter Output
Model PT-INV-4KVA 48V-Color LED, Wall-H
Continuous Output Power 3000W
Surge Rating(20s) 9000W
Capable of Starting Electric Motor 3HP
Output Waveform Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency >88%(Peak)
Line Mode Efficiency >95%
Power Factor 0.9-1.0
Nominal Output Voltage rms 220-230-240Vac
Output Voltage Regulation ±10% RMS
Output Frequency 50Hz ± 0.3Hz
Short Circuit Protection Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time 10ms(Max)
THD < 10%
DC Input
Nominal Input Voltage 12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Alarm 10.5Vdc/11.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Trip 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High Voltage Alarm & Fault 16.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High DC Input Recovery 15.5Vdc
Low Battery voltage recover 15.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Idle Consumption-Search Mode < 25 W when Power Saver On
Charge
Input Voltage Range Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC
Input Frequency Range Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz  | Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage Depends on battery type
Charger Breaker Rating 20A
Max Charge Rate 50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current) 4 step digital controlled progressive charge Battery types ( *2 for 24Vdc, *4 for 48Vdc)
Battery type Fast Vdc
Gel U.S.A 13.7
A.G.M 1 13.4
A.G.M 2 13.7
Sealed Lead Acid 13.6
Gel Euro 13.8
Open Lead Acid 13.3
Calcium 13.6
De-sulphation 15.5 for 4hrs
Remote Control Yes. Optional
Bypass & Protection
Input Voltage Waveform Sine wave (Grid or Generator)
Nominal Voltage 120Vac
Low Voltage Trip 184V/140V±4%
Low Voltage re engage 194V/150V±4%
High Voltage Trip 253V/270V±4%
High Voltage re engage 243V/260V±4%
Max Input AC Voltage 280VAC
Nominal Input Frequency 50Hz or 60Hz (Auto detect)
Low Freq Trip Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection Circuit breaker
Bypass breaker rating 30A
Transfer switch rating 30amp for UL
Max bypass current 30amp
Mechanical Specification
Mounting Wall mount
Inverter Dimensions(L*W*H) 388*3415*200mm
Inverter Weight 27KG
Shipping Dimensions(L*W*H) 550x320x310mm
Shipping Weight 29KG
Display Status LEDs / Status LEDs+LCD
Standard Warranty 1 Year
WeightN/A5 kg50 kgN/AN/AN/A
DimensionsN/A348 × 270 × 95 cmN/AN/AN/AN/A
Additional information
Weight 5 kg
Dimensions 348 × 270 × 95 cm
Weight 50 kg
Sold000000
Shipping
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Add to cart
Click outside to hide the comparison bar
Compare