“Prag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT” has been added to your cart. View cart

Prag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT

Name: Prag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT
Brand: Prag
SKU: 23128
Availability: InStock

Add to wishlist

₦2,700,000.00

(0 reviews)

27 people are viewing this right now

Estimated Delivery:

15 - 22 Oct, 2025

Guaranteed safe & secure checkout

Product details

PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.

PRAG 10KVA 48V INVERTER Features

Powerful Pure Sine Wave (PSW) Inverter/Charger
13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
High efficiency design and Power Saving Mode to conserve energy
8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
Battery DOD (Depth of Discharge) setting from 50%
Easy and straightforward installation
Designed to operate under harsh environment
DC Start and Automatic Self Diagnostic (ASD) function
Compatible with Linear and Non-Linear loads
Low DC Voltage home and office appliances support
Up to 120Amp charging current selectable from 0%-100%
Battery priority mode for preferred UPS configuration

Inverter Output
Model	PT-INV-10KVA/9000W 48V-Color LED, Wall-H
Continuous Output Power	9000W
Surge Rating(20s)	24000W
Capable of Starting Electric Motor	8HP
Output Waveform	Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency	>88%(Peak)
Line Mode Efficiency	>95%
Power Factor	0.9-1.0
Nominal Output Voltage rms	220-230-240Vac
Output Voltage Regulation	±10% RMS
Output Frequency	50± 0.3Hz/60± 0.3Hz
Short Circuit Protection	Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time	10ms(Max)
THD	< 10%
DC Input
Nominal Input Voltage	12.0Vdc
Nominal Input Voltage	( 2 for 24Vdc, 4 for 48Vdc)
Minimum Start Voltage	10.0Vdc/10.5Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Low Battery Alarm	10.5Vdc/11.0Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Low Battery Trip	10.0Vdc/10.5Vdc ( 2 for 24Vdc, 4 for 48Vdc)
High Voltage Alarm & Fault	16.0Vdc ( 2 for 24Vdc, 4 for 48Vdc)
High DC Input Recovery	15.5Vdc
Low Battery voltage recover	15.5Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Idle Consumption-Search Mode	< 25 W when Power Saver On
Charge
Input Voltage Range	Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC
Input Frequency Range	Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage	Depends on battery type
Charger Breaker Rating	40A
Max Charge Rate	50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown	15.7V for 12Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Charger curve(4 stage constant current) 4 step digital controlled progressive charge	Battery types ( 2 for 24Vdc, 4 for 48Vdc)
Battery type	Float Vdc
Gel U.S.A	13.7
A.G.M 1	13.4
A.G.M 2	13.7
Sealed Lead Acid	13.6
Gel Euro	13.8
Open Lead Acid	13.3
Calcium	13.6
De-sulphation	15.5 for 4hrs
Remote Control	Yes. Optional
Bypass & Protection
Input Voltage Waveform	Sine wave (Grid or Generator)
Nominal Voltage	220Vac
Low Voltage Trip	184V/140V±4%
Low Voltage re engage	194V/150V±4%
High Voltage Trip	253V/270V±4%
High Voltage re engage	243V/260V±4%
Max Input AC Voltage	280VAC
Nominal Input Frequency	50Hz or 60Hz (Auto detect)
Low Freq Trip	Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage	Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip	Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage	Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection	Circuit breaker
Bypass breaker rating	63A
Transfer switch rating	80amp for UL
Max bypass current	80amp
Mechanical Specification
Mounting	Wall mount
Inverter Dimensions(LWH)	588415200mm
Inverter Weight	66KG
Shipping Dimensions(LWH)	750x520x310mm
Shipping Weight	68KG
Display	Status LEDs / Status LEDs+LCD
Standard Warranty	1 Year

Quick Comparison

Prag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT remove Prag 6.5KVA - 48V Pure Sine Wave Inverter - Wall Mount remove Mercury 200AH, 12V GEL Inverter Battery remove Prag 5kw Premium Solar Inverter remove iPowerplus 3KVA/24V Inverter remove Mercury VM 2.4kva/24v Off Grid Hybrid Solar Inverter remove

Name Prag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT remove Prag 6.5KVA - 48V Pure Sine Wave Inverter - Wall Mount remove Mercury 200AH, 12V GEL Inverter Battery remove Prag 5kw Premium Solar Inverter remove iPowerplus 3KVA/24V Inverter remove Mercury VM 2.4kva/24v Off Grid Hybrid Solar Inverter remove

Image

SKU

Rating

Price

₦2,700,000.00

₦1,105,000.00

₦470,000.00

₦1,090,000.00

Save 3%

₦396,000.00

Stock

20 in stock

Availability 20 in stock 20 in stock 20 in stock

Add to cart

Description

Mercury Gel 12V 200AH Deep Cycle
Low self-discharge
High impact resistive plastic cast
Compact design and heavy duty grids

Pure Sine wave Solar Inverter
Advanced Inverter
In-Built MPPT solar charge controller
Online UPS: Zero transfer time, perfect for critical devices such as Servers and ATMs

Hybrid System
3KVA

2.4Kva Off Grid Hybrid Solar Inverter 24v
Pure Sinewave with MPPT Voltage range 120 ~ 430VCD
Max SCC 80A

Content

PRAG 10KVA 48V INVERTER W-EY (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today. PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame. PRAG 10KVA 48V INVERTER Features

Powerful Pure Sine Wave (PSW) Inverter/Charger
13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
High efficiency design and Power Saving Mode to conserve energy
8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
Battery DOD (Depth of Discharge) setting from 50%
Easy and straightforward installation
Designed to operate under harsh environment
DC Start and Automatic Self Diagnostic (ASD) function
Compatible with Linear and Non-Linear loads
Low DC Voltage home and office appliances support
Up to 120Amp charging current selectable from 0%-100%
Battery priority mode for preferred UPS configuration

Inverter Output
Model	PT-INV-10KVA/9000W 48V-Color LED, Wall-H
Continuous Output Power	9000W
Surge Rating(20s)	24000W
Capable of Starting Electric Motor	8HP
Output Waveform	Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency	>88%(Peak)
Line Mode Efficiency	>95%
Power Factor	0.9-1.0
Nominal Output Voltage rms	220-230-240Vac
Output Voltage Regulation	±10% RMS
Output Frequency	50± 0.3Hz/60± 0.3Hz
Short Circuit Protection	Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time	10ms(Max)
THD	< 10%
DC Input
Nominal Input Voltage	12.0Vdc
Nominal Input Voltage	( 2 for 24Vdc, 4 for 48Vdc)
Minimum Start Voltage	10.0Vdc/10.5Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Low Battery Alarm	10.5Vdc/11.0Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Low Battery Trip	10.0Vdc/10.5Vdc ( 2 for 24Vdc, 4 for 48Vdc)
High Voltage Alarm & Fault	16.0Vdc ( 2 for 24Vdc, 4 for 48Vdc)
High DC Input Recovery	15.5Vdc
Low Battery voltage recover	15.5Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Idle Consumption-Search Mode	< 25 W when Power Saver On
Charge
Input Voltage Range	Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC
Input Frequency Range	Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage	Depends on battery type
Charger Breaker Rating	40A
Max Charge Rate	50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown	15.7V for 12Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Charger curve(4 stage constant current) 4 step digital controlled progressive charge	Battery types ( 2 for 24Vdc, 4 for 48Vdc)
Battery type	Float Vdc
Gel U.S.A	13.7
A.G.M 1	13.4
A.G.M 2	13.7
Sealed Lead Acid	13.6
Gel Euro	13.8
Open Lead Acid	13.3
Calcium	13.6
De-sulphation	15.5 for 4hrs
Remote Control	Yes. Optional
Bypass & Protection
Input Voltage Waveform	Sine wave (Grid or Generator)
Nominal Voltage	220Vac
Low Voltage Trip	184V/140V±4%
Low Voltage re engage	194V/150V±4%
High Voltage Trip	253V/270V±4%
High Voltage re engage	243V/260V±4%
Max Input AC Voltage	280VAC
Nominal Input Frequency	50Hz or 60Hz (Auto detect)
Low Freq Trip	Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage	Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip	Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage	Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection	Circuit breaker
Bypass breaker rating	63A
Transfer switch rating	80amp for UL
Max bypass current	80amp
Mechanical Specification
Mounting	Wall mount
Inverter Dimensions(LWH)	588415200mm
Inverter Weight	66KG
Shipping Dimensions(LWH)	750x520x310mm
Shipping Weight	68KG
Display	Status LEDs / Status LEDs+LCD
Standard Warranty	1 Year

PRAG 6.5KVA – 48V Inverter H-Series (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak conversion efficiency of 88%. So, it is packed with unique features and it is one of the most advanced inverter/chargers in the market today. Furthermore, the PRAG 6.5KVA – 48V Inverter H-Series (Pure Sine Wave) features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment. Subsequently, PRAG 6.5KVA – 48V Inverter H-Series (Pure Sine Wave) is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.

PRAG 6.5KVA – 48V Inverter Features

The PRAG Inverter is Easy to Install and Easy to Operate. This inverter is also Easy to Solve
It is also designed to Operate under Harsh Environment
The Inverter comes with the ability to do a DC Start & Automatic Self-Diagnostic Function
It is Compatible with Both Linear and Non-Linear Load
Furthermore, Low DC Voltage Supports Home and Office Appliances on the inverter
With this PRAG Inverter, you can enjoy Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
High Efficiency Inverter Design and “Power Saving Mode” to Conserve Energy
Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
13 Vdc Inverter Battery Recover Point, Dedicated for Renewable Energy Systems
8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Inverter Batteries
4-step Intelligent battery Charging, PFC (Power Factor Correction) for Charger
8 ms Typical Transfer Time Between Utility and Inverter Battery, Guarantees Power Continuity
15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
Battery DOD(Depth of Discharge)setting from 50% to 100%

This mercury 200AH Gel battery is a deep cycled sealed maintenance-free battery designed for inverters, telecommunication and other applications involving battery back-up need that involve continuous charging and discharging. To keep your inverter as well as business up and running‎,‎ you need the Mercury 200 AMP Battery to convert the direct current to alternating current which set the output voltage in 200 amp‎‎ that meets the specification of your household appliances‎‎‎.‎‎ Power is stored in this battery as it is designed to store rechargeable current and provides a flow of power to your inverter when there is no public power supply available‎‎‎.‎‎‎ This Mercury battery is 200AH 12V‎‎‎.‎‎‎ It is also a lead acid battery‎‎‎,‎‎‎ what this means is that it will use a reversible chemical reaction to store its energy‎‎‎.‎‎‎ It uses lead plates in a solution of sulphuric acid which generates electric energy‎‎‎.‎‎‎ This electric energy is then used to power the inverter‎‎ which offers you stable light to enjoy all through the day‎.‎‎‎ The Mercury battery is the best method to provide alternative power for a limited period‎‎ as it typically takes some hours to recharge‎‎‎.‎‎‎ Here are some of the reason why the battery is best for you‎‎‎;‎ it has a low maintenance cost and it is not expensive to buy‎‎ unlike running your home with a generator‎‎‎,‎‎‎ the inverter operation is so quiet‎‎ and‎ there will be no form of noise pollution‎‎‎.‎‎‎ Another important thing is that this battery has exceptional charge retention and recovering ability and also environmental friendly‎.‎‎‎ It has the ability to withstand overcharge‎,‎ discharge efficiently and‎‎ is not affected by shocks and vibration‎‎‎.‎‎‎ The battery can last for many years of continuous use before needing replacement‎‎‎‎ which‎‎ makes it a good choice as a back‎-up power provider‎‎‎.‎ Features:

Leak-proof and sealed construction
Maintenance free
Compact design and heavy duty grids
Low self discharge
Wide operating temperature
High impact resistive plastic cast
56.5kg weight
225mm x 523mm x 240mm volume

5KW-48V Solar Inverter (5000W-MPPT) Features

Operates with or without battery
500V/5000W MPPT
Overcharge Protection
Wide DC input range
Output power factor 1
Cold start function
Optional anti-dusk kit
High PV input voltage range
Lithium Battery Compatible
High Charging Current -100A
Battery independent design
Pure Sine wave Solar Inverter
Selectable high charging current
Auto restart while AC is recovering
Overload and short circuit protection
Compatible to mains voltage or generator power
Smart battery charger design for optimized battery performance
Built-in anti-dust kit for harsh environment (only for 3K/5K models)
Built-in 80A and 100A MPPT solar charger for 1.2K/2.5K/ 3K Premium and 3K/5K respectively
Battery equalization function to optimize battery performance and extend lifecycle

The iPowerPlus 3KVA/24V runs on a pure sine wave technology. It is well shielded from short-circuits and overload complications with automated tripping off when the batteries get to the threshold. It is a hybrid system with an in-built solar charge controller that has a complementary in-built cooling system comprising of heat zinc and fans. Other features The iPowerPlus 3KVA/24V is compatible with both mains voltage and generator power. It interfaces with the utility electricity in the home to provide power through solar panels and seamlessly resolve any power interruptions that may occur. It includes other features such as:

A smart battery charger that optimizes battery performance
Selectable charging current depending on the applications
Selectable input voltage range
Configurable solar/AC input priority
Auto restart while AC recovers
A perfect alarming system

We must point out that the transition from mains to generator and vice versa is very seamless and usually occurs without you even noticing it except you are close by the inverter.