Name: PRAG 10KVA TRIAC Voltage Stabilizer
Brand: Prag
SKU: 23372
Availability: InStock

Image

Mercury 10KVA AVR - 1 Phase - Servo Stabilizer

Vertiv Liebert itON 1500VA E 230V IEC-IEC UPS

SKU

Rating

Price

₦526,000.00

₦108,000.00

₦485,000.00

₦148,000.00

₦200,000.00

Stock

20 in stock

Out of stock

20 in stock

Availability

20 in stock

Out of stock

20 in stock

Add to cart

Specifications

Model	10KVA
Input Voltage	AC 95V-250V
Actual Working Input Voltage	85-268v(AC)
Input Voltage to Maintain High Precision Output	100-250v(AC)
Output Voltage	AC 220V±5% 50/60Hz
Delay Time	Short Delay: 3-5secs Long Delay: 3-7mins
Protection	Over Voltage(247v±4V), Under Voltage(170V±4V), Overload, High temperature, Short Circuit
Power	10000VA
Product Size(cm)	43.834.418.5
Packing Size(cm)	4939.523
N.W.(kgs)	25.3

Frequent power interruptions can lead to stress and delays in meeting project deadlines while working on your computer. The Mercury Maverick 1550VA line interactive UPS provides a reliable power back up that enables you save your work the moment there is power interruption or public power outage. It has a wide voltage input range of 140~300VAC with a transfer time of 2 – 6ms and is compatible with generators and the erratic public power supply. Features • Built in AVR with wide input range of 140~300VAC • Auto restart • Output short circuit protection • Overload protection • Overcharge protection • Sleek and compact design with cpu control • Green function ( No load cut off ) Country wide maintenance and service centres available Input Voltage 220VAC Input Frequency 50Hz or 60Hz Input Phase Single Input Socket With Fuse Input Range (220v) 140V – 300VAC Rating Output 1550VA/930V Output Waveform Simulated Sine wave Battery Type 12V/8.2AH x2 Dimension(mm) 313 x 129 x 175 Weight (Kg) 4.4

Output power capacity: 375watts / 650va Max configurable power (watts): 375watts / 650va Nominal output voltage: 230v Output frequency (not synced): 50/60 hz +/-1 hz Topology: line interactive Waveform type: stepped approximation to a sinewave Output connections: (6) iec 320 c13 (battery backup) Transfer time: 6ms typical : 10ms maximum Nominal input voltage: 230v Input frequency: 50/60 hz +/- 5 hz (auto sensing) Input connections: iec-320 c14 Cord length: 1.52meters Number of power cords: 1 Battery type: maintenance-free sealed lead-acid battery with suspended electrolyte: leakproof Expected battery life (years): 3 - 5 Efficiency: Communications & management: control panel LED status display with on line : on battery

Mercury 10KVA AVR - 1 Phase - Servo Stabilizer (Input voltage: 100V-255V AC

Power: 10KVA
Technology: Relay Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 220V ± 10%
Phase: Single
Compact Design – Sleek & handy. Get the Mercury 10kVA AVR for that all-important voltage protection to your equipment. With the Mercury 10kVA AVR, you can support heavy-duty equipment or a number of appliances at a stretch.Power fluctuations are common and for anyone using power generators (and who doesn’t?), the risk of voltage fluctuations is even higher. What you must know, also, is that voltage fluctuations can damage your important appliances, causing you financial loss.Automatic voltage regulators, AVR, provide the voltage stabilization that will protect your sensitive equipment. AVRs, commonly called stabilizers, are designed to stabilize the voltage. That not only helps your equipment to function optimally but protects them from damage. The AVR will take a wide input voltage range and output a regulated voltage range that is safe for your equipment.Having an AVR that delivers the expected result is a different matter, though. All AVRs are not made equal. And you need an AVR that does an effective job of providing the voltage stabilization that is imperative to keep your valued equipment safe.

That is where Mercury brand AVRs come in. Mercury AVRs are built to high standards and offer efficient voltage regulation function. With Mercury AVR, you get the result that you expect, with your equipment enjoying that all-important protection from voltage-induced damage. These Mercury AVRs also deliver the durability users expect, serving you for years on end. This is a quality stabilizer, suitable for home appliances and office equipment FEATURES:

Small Footprint
Wide Application
High cost effective & High power density
Automatic Control Circuit
High Quality Components
Ring Transformer Structure
Minimum Magnetic Leakage
Convenient Daily Maintenance
Stable Performance and Reliability
No Additional Distortion of Output Waveform
High Precision Auto Voltage Regulator Power Supply
Multi-layer Structure Carbon Brush with Long Service Time
High Adaptability to all kinds of non linear loads such as Inductive load and Capacitive load

Automatic voltage regulator (AVR with boost and trim)
Compact size
Light weight
Easy operation
Overload protection and alarm
Auto re-start with AC recovery
Fast charging
Cold start function

Rating input voltage 2000 VA / 1200 W Rating input frequency 60/50Hz (auto sensing) Input phase Single phase Input socket With Fuse Rating output voltage (V) 220 Waveform Battery mode (simulated sine wave), AC Voltage Regulation ±10% (Battery mode) Rear output socket 4 x Universal - Battery backup Waveform Simulated Sine Wave (Battery mode) Line Mode Synchronize with the utility Rating frequency 60Hz or 50 Hz ± 1 Hz Battery Mode Yellow flashing Short circuit protection Line Mode Fuse & Firmware protection Short circuit protection Battery Mode Firmware Protection Overload protection Line Mode 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. Indicators AC mode Green Lighting Indicators Battery Mode Yellow Flashing Indicators Fault Red Lighting Alarm Battery Mode Sounding every 10 Seconds Alarm Low Battery Sounding every Second Alarm Overload Sounding every 0.5 second Alarm Fault Continuously sounding Full Protection Overload, discharge, and Overcharge protection Communication Interface Optional RS232/RJ11

Content

The 10KVA TRIAC 95-250V Wall Mount Voltage Stabilizer is engineered to ensure stable power delivery for high-performance appliances, preventing damage due to voltage fluctuations. Designed with a wide input voltage range from 95V to 250V and an extended working range of 85-268V, this stabilizer guarantees consistent output at 220V ±5% with a frequency of 50/60Hz. This precision output enhances the efficiency and longevity of connected equipment, even in unstable power conditions. Equipped with advanced protection features, this 10KVA model safeguards against over-voltage (247V ±4V), under-voltage (170V ±4V), overloads, high temperatures, and short circuits, ensuring safe operation under any conditions. For flexibility, the stabilizer offers adjustable delay times: a short delay of 3-5 seconds and a long delay of 3-7 minutes, catering to different appliance requirements and reducing sudden surges. With a compact wall-mount design and a sleek size of 43.8 x 34.4 x 18.5 cm, it fits seamlessly into any setup. The product is highly durable, weighing 25.3 kg net and 26.3 kg gross, and comes packaged securely with dimensions of 49 x 39.5 x 23 cm. For anyone needing reliable voltage control, the 10KVA TRIAC stabilizer is an excellent choice, delivering both precision and robust protection for household and commercial equipment alike.

Frequent power interruptions can lead to stress and delays in meeting project deadlines while working on your computer. The Mercury Maverick 1550VA line interactive UPS provides a reliable power back up that enables you save your work the moment there is power interruption or public power outage. It has a wide voltage input range of 140~300VAC with a transfer time of 2 – 6ms and is compatible with generators and the erratic public power supply. Features • Built in AVR with wide input range of 140~300VAC • Auto restart • Output short circuit protection • Overload protection • Overcharge protection • Sleek and compact design with cpu control • Green function ( No load cut off ) Country wide maintenance and service centres available Input Voltage 220VAC Input Frequency 50Hz or 60Hz Input Phase Single Input Socket With Fuse Input Range (220v) 140V – 300VAC Rating Output 1550VA/930V Output Waveform Simulated Sine wave Battery Type 12V/8.2AH x2 Dimension(mm) 313 x 129 x 175 Weight (Kg) 4.4

APC EASY UPS BV 650VA, AVR, Universal Outlet, 230V

Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers.

Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

Provides early-warning fault analysis on batteries, enabling timely preventive maintenance

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Provides temporary battery power when the utility power is out.

Protect equipment with input transformer blocks without blocking access to other receptacles.

The slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Back up and protect your hardware and data during power outages, surges and spikes.

Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.

Provides notification of changing utility power and UPS power conditions

Provide easy-to-read status of the unit and utility power conditions.

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

" alt="Mercury 10KVA AVR 1 Phase Servo Stabilizer" width="500" height="500" data-src="https://www.digitaldirectng.com/wp-content/uploads/2023/04/Mercury-10KVA-AVR-1-Phase-Servo-Stabilizer.jpg" />

Mercury 10KVA AVR – 1 Phase – Servo Stabilizer

Mercury 10KVA AVR - 1 Phase - Servo Stabilizer (Input voltage: 100V-255V AC

Power: 10KVA
Technology: Relay Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 220V ± 10%
Phase: Single
Compact Design – Sleek & handy. Get the Mercury 10kVA AVR for that all-important voltage protection to your equipment. With the Mercury 10kVA AVR, you can support heavy-duty equipment or a number of appliances at a stretch.Power fluctuations are common and for anyone using power generators (and who doesn’t?), the risk of voltage fluctuations is even higher. What you must know, also, is that voltage fluctuations can damage your important appliances, causing you financial loss.Automatic voltage regulators, AVR, provide the voltage stabilization that will protect your sensitive equipment. AVRs, commonly called stabilizers, are designed to stabilize the voltage. That not only helps your equipment to function optimally but protects them from damage. The AVR will take a wide input voltage range and output a regulated voltage range that is safe for your equipment.Having an AVR that delivers the expected result is a different matter, though. All AVRs are not made equal. And you need an AVR that does an effective job of providing the voltage stabilization that is imperative to keep your valued equipment safe.

That is where Mercury brand AVRs come in. Mercury AVRs are built to high standards and offer efficient voltage regulation function. With Mercury AVR, you get the result that you expect, with your equipment enjoying that all-important protection from voltage-induced damage. These Mercury AVRs also deliver the durability users expect, serving you for years on end. This is a quality stabilizer, suitable for home appliances and office equipment FEATURES:

Small Footprint
Wide Application
High cost effective & High power density
Automatic Control Circuit
High Quality Components
Ring Transformer Structure
Minimum Magnetic Leakage
Convenient Daily Maintenance
Stable Performance and Reliability
No Additional Distortion of Output Waveform
High Precision Auto Voltage Regulator Power Supply
Multi-layer Structure Carbon Brush with Long Service Time
High Adaptability to all kinds of non linear loads such as Inductive load and Capacitive load

The Liebert itON 1500 VA is a reliable line interactive ups designed to protect desktops and standalone computing equipment. The Liebert itON comes with an automatic voltage regulator (AVR) to provide flexibility and reliability to computers and other sensitive electronic equipment. With its compact design and easy –to use controls, the Liebert itON offer sufficient autonomy to safely back up current tasks before shutting down the system. LI32141CT21 is ideally suited for the following equipment:

Desktop PCs
Professional workstations
Small routers, bridges, and hubs
Point-of-sale terminals
Other sensitive electronics

Features

Equipment with boost and buck AVR to stabilize the input voltage
Microprocessor control guarantees high reliability
Provides AC overload protection
Auto-restart with AC recover
Compact size, lightweight
Fast charging
Off mode charging
Cold start function
Overload protection and alarm
USB communication port for monitoring and shutdown software (UX models only)

Top Benefits

Smart RS232/USB interface for power management
Excellent microprocessor control guarantees high reliability
AVR Boost and buck for voltage stabilization
Auto restart while AC is recovering
Simulated sine wave
Auto charging at Off-mode
Cold start function
Generator compatible

Key Specifications CAPACITY 1500 VA/900 Watt. INPUT

Voltage 220/230 VAC
INPUT Voltage Range 140-300 VAC
Frequency Range 50 Hz

OUTPUT

AC Voltage Regulation (Batt. Mode) ±10%
Frequency Range (Batt. Mode) 50 Hz ±1 Hz
Transfer Time Typical 2-6 ms
Waveform (Batt. Mode) Simulated Sine Wave
Overload 110% +/-10% Shutdown after 5 mins

BATTERY

Battery Type & Number 12 V/7 Ah x 2
Typical Recharge Time 6-8 hours up to 90% capacity

TRANSFER TIME Minimum line break for Typical 4-8 msec transfer to battery

MERCURY Line Interactive UPS (2000VA) - Elite 2000 ProWide input voltage rangeCompatible with generatorsOverload protectionShort circuit protectionBuilt-in AVRBattery deep discharge protection & overcharge protectionRating input voltage: 2000 VA / 1200 WRating input frequency: 60/50Hz (auto sensing)Input phase: Single phaseInput socket: With FuseCold Start (0 to 100% load): Press the ON/OFF SwitchInput Range (220V): 140-300Rating output (VA): 2000Rating output (W): 1200Power factor: 0.6Rating output voltage (V): 220Waveform: Battery mode (simulated sine wave), AC mode (sine wave)AC Voltage Regulation: ±10% (Battery mode)Rear output socket: 4 x Universal - Battery backupWaveform: Simulated Sine Wave (Battery mode)Line Mode: Synchronize with the utilityRating frequency: 60Hz or 50 Hz ± 1 HzBattery Mode: Yellow flashingShort circuit protection Line Mode: Fuse & Firmware protectionShort circuit protection Battery Mode: Firmware ProtectionOverload protection Line Mode: 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately.Overload protection Battery Mode: 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediatelyIndicators AC mode: Green LightingIndicators Battery Mode: Yellow FlashingIndicators Fault: Red LightingAlarm Battery Mode: Sounding every 10 SecondsAlarm Low Battery: Sounding every SecondAlarm Overload: Sounding every 0.5 secondAlarm Fault: Continuously soundingFull Protection: Overload, discharge, and Overcharge protectionTransfer Time: Typical 2-6ms, 10ms max.Transfer Time: Typical 2-6ms, 10ms max.Communication Interface: Optional RS232/RJ11Battery and runtime rating: 2 X 12V/9AHRecharge time – Typical: 6-8 hours recover to 90% capacityCharge current: About 1A at normal mode Mercury Elite 2000 Pro Line Interactive UPS provides a relatively robust capacity for power backup to meet office as well as domestic power backup demands. With the Mercury Elite 2000 you not only get power backup for your equipment but also enjoy solid protection for those appliances. The built-in AVR function of the Elite 2000 Pro means dangerous power fluctuations won't easily make mincemeat of your equipment.

Weight

N/A

4.4 kg

0.2 kg

20 kg

5 kg

3 kg

Dimensions

N/A

313 × 129 × 175 cm

N/A

Additional information

Weight	4.4 kg
Dimensions	313 × 129 × 175 cm

Weight	0.2 kg

Weight	20 kg

Weight	5 kg

Weight	3 kg

Sold

0

Shipping

Subtotal	₦730,000.00
Total	₦730,000.00

PRAG 10KVA TRIAC Voltage Stabilizer

Product details

Shipping and Returns

Prag

Rating & Review

Question & Answer

Quick Comparison

Specifications

Mercury 10KVA AVR – 1 Phase – Servo Stabilizer

Vertiv Liebert itON 400VA

Prag 15kva Servo Voltage Stabilizer (130-260V)

APC SMART-UPS 900WATTS/1500VA

APC EASY UPS BV 650VA

Vertiv Liebert itON 2000VA UPS

PRAG 10KVA TRIAC Voltage Stabilizer

Product details

Shipping and Returns

Prag

Rating & Review

Question & Answer

Quick Comparison

Specifications

Mercury 10KVA AVR – 1 Phase – Servo Stabilizer

Related products

Vertiv Liebert itON 400VA

Prag 15kva Servo Voltage Stabilizer (130-260V)

APC SMART-UPS 900WATTS/1500VA

APC EASY UPS BV 650VA

Vertiv Liebert itON 2000VA UPS

Shopping Cart