Inverter Output
Model 5K-48
Power Rating 5000W
Parallel Capability up to 9 units
INPUT
Voltage 230 VAC
Voltage Range 110 – 280 VAC
Frequency Range 60/50 Hz (Auto Sensing)
OUTPUT
Efficiency (Peak) 93% at line mode, 90% at battery mode
Surge Power 10000 VA for 5 sec
Transfer Time 0 ms
Waveform Pure Sine Wave
BATTERY
Battery Voltage 48 VDC
Floating Charge Voltage 54 VDC
Overcharging Protection 66 VDC
SOLAR CHARGER & AC CHARGER
Solar Charger Type MPPT
Maximum PV Array Open Circuit Voltage 145 VDC
Maximum PV Array Power 4000 W
MPPT Range @ Operating Voltage 60 VDC ~115 VDC
Maximum Solar Charge Current 80 A
Maximum AC Charge Current 60 A
Maximum Charge Current 140 A
Maximum Efficiency 98%
Standby Power Consumption 2 W
PHYSICAL
Dimension, D x W x H (mm) 140 x 303 x 525
Net Weight (Kgs) 13.5
Communication Port USB/RS232/RS485/Bluetooth/Dry-contact
OPERATING ENVIRONMENT
PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.
A smart battery charger that optimizes battery performance
Selectable charging current depending on the applications
Selectable input voltage range
Configurable solar/AC input priority
Auto restart while AC recovers
A perfect alarming system
5KVA.48V
PV Array: 9000W
4.3” Touchscreen LCD
Pure Sine wave Solar Inverter
Built-in Wi-Fi for mobile monitoring (Android/iOS App available)
Built In MPPT Solar Charge Controller: String/High PV (450V DC)
Pure sine wave ;AC output delivers clean, safe power to run sensitive equipment. Voltage regulation in battery mode keeps output steady.
Built-in Wi-Fi for remote monitoring via mobile app (Android/iOS). USB, RS232, and RS485 ports allow communication with external devices like batteries.
>;Status LEDs clearly indicate system status. RGB lights show the power source (solar, grid, battery) and battery charge/discharge condition.
A robust design with a replaceable fan and anti-dust kit allows reliable operation in harsh environments.
Supports parallel operation to increase capacity up to 66,000W (up to 6 units).
>;Automatic transfer between solar, utility/generator, and battery power ensures uninterrupted supply.
Content
Pure Sine wave Solar Inverter
Advanced Inverter
In-Built MPPT solar charge controller
Online UPS: Zero transfer time, perfect for critical devices such as Servers and ATMs
Modular/Parallel Operation: up to 9 units of this inverter can be combined to give a maximum of 45KW
Detachable LCD control module with multiple communications
Built-in Bluetooth for mobile monitoring (Android App is available)
Lithium Battery Charging Compatible
Supports USB On-the-Go function
Reserved communication port for BMS (RS485, CAN-BUS or RS232)
PRAG 10KVA 48V INVERTER W-EY (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today.
PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.
PRAG 10KVA 48V INVERTER Features
Powerful Pure Sine Wave (PSW) Inverter/Charger
13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
High efficiency design and Power Saving Mode to conserve energy
8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
Battery DOD (Depth of Discharge) setting from 50%
Easy and straightforward installation
Designed to operate under harsh environment
DC Start and Automatic Self Diagnostic (ASD) function
Compatible with Linear and Non-Linear loads
Low DC Voltage home and office appliances support
Up to 120Amp charging current selectable from 0%-100%
Battery priority mode for preferred UPS configuration
iPower Infiniti 5KVA/48V Inverter PV Array:9000W iPowerPlus Inverters are digital smart power solutions which range from 1KVA-20KVA. The Pure Sine Wave Hybrid Inverter comes with an in-built solar charge controller that connects automatically to solar and utility supply. This allows you to switch between AC Power and Solar Power
Rated Output Power 5000VA/4000W
Maximum PV Array Power 9000W
MPPT Voltage Range 60-115 VDC
Dimension 194 x 295 x 455
Weight 17kg
Maximum Charging Current 140
3.6KW-24V (4000W MPPT) Solar Inverter Features
Pure Sine wave Solar Inverter
Inbuilt MPPT Solar Charger
Customizable status LED ring with RGB lights
Touchable button with large 4.3 colored LCD
Built-in WiFi for mobile monitoring (Android/iOS App available)
Supports USB On-the-Go function
Data log events stored in the Inverter
Reserved communication port (RS485, CAN-BUS or RS232) for BMS
Battery independent design
Battery equalization extends lifecycle
User-friendly LCD operation
Enhanced charging power
Optional anti-dusk kit
Pure sine wave ;AC output delivers clean, safe power to run sensitive equipment. Voltage regulation in battery mode keeps output steady.
Built-in Wi-Fi for remote monitoring via mobile app (Android/iOS). USB, RS232, and RS485 ports allow communication with external devices like batteries.
>;Status LEDs clearly indicate system status. RGB lights show the power source (solar, grid, battery) and battery charge/discharge condition.
A robust design with a replaceable fan and anti-dust kit allows reliable operation in harsh environments.
Supports parallel operation to increase capacity up to 66,000W (up to 6 units).
>;Automatic transfer between solar, utility/generator, and battery power ensures uninterrupted supply.
Rating & Review
There are no reviews yet.