“Prag 7.5KVA – 48V Pure Sine Wave Inverter – Wall Mount” has been added to your cart. View cart

Prag 7.5KVA – 48V Pure Sine Wave Inverter – Wall Mount

Name: Prag 7.5KVA - 48V Pure Sine Wave Inverter - Wall Mount
Brand: Prag
SKU: 23125
Availability: InStock

Add to wishlist

₦1,240,000.00

(0 reviews)

29 people are viewing this right now

Estimated Delivery:

15 - 22 Oct, 2025

Guaranteed safe & secure checkout

Product details

So, it is packed with unique features and it is one of the most advanced inverter/chargers in the market today.

Furthermore, the PRAG 7.5KVA – 48V Inverter H-Series (Pure Sine Wave) features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.

Subsequently, PRAG 7.5KVA – 48V Inverter H-Series (Pure Sine Wave) is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.

PRAG 7.5KVA – 48V Inverter Features

The PRAG Inverter is Easy to Install and Easy to Operate. This inverter is also Easy to Solve
It is also designed to Operate under Harsh Environment
The Inverter comes with the ability to do a DC Start & Automatic Self-Diagnostic Function
It is Compatible with Both Linear & Non-Linear Load
Low DC Voltage Supports Home & Office Appliances on the inverter
With this PRAG Inverter, you can enjoy Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
High Efficiency Inverter Design & “Power Saving Mode” to Conserve Energy
Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
13 Vdc Inverter Battery Recover Point, Dedicated for Renewable Energy Systems
8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Inverter Batteries
4-step Intelligent battery Charging, PFC (Power Factor Correction) for Charger
8 ms Typical Transfer Time Between Utility & Inverter Battery, Guarantees Power Continuity
15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
Battery DOD(Depth of Discharge)setting from 50% to 100%

Quick Comparison

Prag 7.5KVA - 48V Pure Sine Wave Inverter - Wall Mount remove Prag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT remove iPower Infiniti 5KVA/ 48VDC remove Prag 4kva 48v Pure Sinewave Inverter-Wall Mount remove Mercury VM 2.4kva/24v Off Grid Hybrid Solar Inverter remove Prag 3.6kw Plus Solar Inverter remove

Name Prag 7.5KVA - 48V Pure Sine Wave Inverter - Wall Mount remove Prag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT remove iPower Infiniti 5KVA/ 48VDC remove Prag 4kva 48v Pure Sinewave Inverter-Wall Mount remove Mercury VM 2.4kva/24v Off Grid Hybrid Solar Inverter remove Prag 3.6kw Plus Solar Inverter remove

Image

SKU

Rating

Price

₦1,240,000.00

₦2,700,000.00

₦1,170,000.00

₦968,000.00

₦396,000.00

₦1,195,000.00

Stock

20 in stock

Availability 20 in stock 20 in stock

Add to cart

Description

PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.

5KVA.48V
PV Array: 9000W

PRAG 4KVA-48V H-Series (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today. PRAG 4KVA-48V H-Series features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.

2.4Kva Off Grid Hybrid Solar Inverter 24v
Pure Sinewave with MPPT Voltage range 120 ~ 430VCD
Max SCC 80A

4.3” Touchscreen LCD
Pure Sine wave Solar Inverter
Built-in Wi-Fi for mobile monitoring (Android/iOS App available)
Built In MPPT Solar Charge Controller: String/High PV (450V DC)

Content

PRAG 7.5KVA – 48V Inverter H-Series (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak conversion efficiency of 88%. So, it is packed with unique features and it is one of the most advanced inverter/chargers in the market today. Furthermore, the PRAG 7.5KVA – 48V Inverter H-Series (Pure Sine Wave) features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment. Subsequently, PRAG 7.5KVA – 48V Inverter H-Series (Pure Sine Wave) is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.

PRAG 7.5KVA – 48V Inverter Features

The PRAG Inverter is Easy to Install and Easy to Operate. This inverter is also Easy to Solve
It is also designed to Operate under Harsh Environment
The Inverter comes with the ability to do a DC Start & Automatic Self-Diagnostic Function
It is Compatible with Both Linear & Non-Linear Load
Low DC Voltage Supports Home & Office Appliances on the inverter
With this PRAG Inverter, you can enjoy Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
High Efficiency Inverter Design & “Power Saving Mode” to Conserve Energy
Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
13 Vdc Inverter Battery Recover Point, Dedicated for Renewable Energy Systems
8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Inverter Batteries
4-step Intelligent battery Charging, PFC (Power Factor Correction) for Charger
8 ms Typical Transfer Time Between Utility & Inverter Battery, Guarantees Power Continuity
15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
Battery DOD(Depth of Discharge)setting from 50% to 100%

PRAG 10KVA 48V INVERTER W-EY (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today. PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame. PRAG 10KVA 48V INVERTER Features

Powerful Pure Sine Wave (PSW) Inverter/Charger
13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
High efficiency design and Power Saving Mode to conserve energy
8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
Battery DOD (Depth of Discharge) setting from 50%
Easy and straightforward installation
Designed to operate under harsh environment
DC Start and Automatic Self Diagnostic (ASD) function
Compatible with Linear and Non-Linear loads
Low DC Voltage home and office appliances support
Up to 120Amp charging current selectable from 0%-100%
Battery priority mode for preferred UPS configuration

Inverter Output
Model	PT-INV-10KVA/9000W 48V-Color LED, Wall-H
Continuous Output Power	9000W
Surge Rating(20s)	24000W
Capable of Starting Electric Motor	8HP
Output Waveform	Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency	>88%(Peak)
Line Mode Efficiency	>95%
Power Factor	0.9-1.0
Nominal Output Voltage rms	220-230-240Vac
Output Voltage Regulation	±10% RMS
Output Frequency	50± 0.3Hz/60± 0.3Hz
Short Circuit Protection	Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time	10ms(Max)
THD	< 10%
DC Input
Nominal Input Voltage	12.0Vdc
Nominal Input Voltage	( 2 for 24Vdc, 4 for 48Vdc)
Minimum Start Voltage	10.0Vdc/10.5Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Low Battery Alarm	10.5Vdc/11.0Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Low Battery Trip	10.0Vdc/10.5Vdc ( 2 for 24Vdc, 4 for 48Vdc)
High Voltage Alarm & Fault	16.0Vdc ( 2 for 24Vdc, 4 for 48Vdc)
High DC Input Recovery	15.5Vdc
Low Battery voltage recover	15.5Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Idle Consumption-Search Mode	< 25 W when Power Saver On
Charge
Input Voltage Range	Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC
Input Frequency Range	Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage	Depends on battery type
Charger Breaker Rating	40A
Max Charge Rate	50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown	15.7V for 12Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Charger curve(4 stage constant current) 4 step digital controlled progressive charge	Battery types ( 2 for 24Vdc, 4 for 48Vdc)
Battery type	Float Vdc
Gel U.S.A	13.7
A.G.M 1	13.4
A.G.M 2	13.7
Sealed Lead Acid	13.6
Gel Euro	13.8
Open Lead Acid	13.3
Calcium	13.6
De-sulphation	15.5 for 4hrs
Remote Control	Yes. Optional
Bypass & Protection
Input Voltage Waveform	Sine wave (Grid or Generator)
Nominal Voltage	220Vac
Low Voltage Trip	184V/140V±4%
Low Voltage re engage	194V/150V±4%
High Voltage Trip	253V/270V±4%
High Voltage re engage	243V/260V±4%
Max Input AC Voltage	280VAC
Nominal Input Frequency	50Hz or 60Hz (Auto detect)
Low Freq Trip	Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage	Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip	Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage	Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection	Circuit breaker
Bypass breaker rating	63A
Transfer switch rating	80amp for UL
Max bypass current	80amp
Mechanical Specification
Mounting	Wall mount
Inverter Dimensions(LWH)	588415200mm
Inverter Weight	66KG
Shipping Dimensions(LWH)	750x520x310mm
Shipping Weight	68KG
Display	Status LEDs / Status LEDs+LCD
Standard Warranty	1 Year

iPower Infiniti 5KVA/48V Inverter PV Array:9000W iPowerPlus Inverters are digital smart power solutions which range from 1KVA-20KVA. The Pure Sine Wave Hybrid Inverter comes with an in-built solar charge controller that connects automatically to solar and utility supply. This allows you to switch between AC Power and Solar Power

Rated Output Power 5000VA/4000W
Maximum PV Array Power 9000W
MPPT Voltage Range 60-115 VDC
Dimension 194 x 295 x 455
Weight 17kg
Maximum Charging Current 140

Powerful Pure Sine Wave (PSW) Inverter/Charger
13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
High efficiency design and Power Saving Mode to conserve energy
8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
Battery DOD (Depth of Discharge) setting from 50%
Easy and straightforward installation
Designed to operate under harsh environment
DC Start and Automatic Self Diagnostic (ASD) function
Compatible with Linear and Non-Linear loads
Low DC Voltage home and office appliances support
Up to 120Amp charging current selectable from 0%-100%
Battery priority mode for preferred UPS configuration

Inverter Output
Model	PT-INV-4KVA 48V-Color LED, Wall-H
Continuous Output Power	3000W
Surge Rating(20s)	9000W
Capable of Starting Electric Motor	3HP
Output Waveform	Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency	>88%(Peak)
Line Mode Efficiency	>95%
Power Factor	0.9-1.0
Nominal Output Voltage rms	220-230-240Vac
Output Voltage Regulation	±10% RMS
Output Frequency	50Hz ± 0.3Hz
Short Circuit Protection	Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time	10ms(Max)
THD	< 10%
DC Input
Nominal Input Voltage	12.0Vdc
Nominal Input Voltage	( 2 for 24Vdc, 4 for 48Vdc)
Minimum Start Voltage	10.0Vdc/10.5Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Low Battery Alarm	10.5Vdc/11.0Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Low Battery Trip	10.0Vdc/10.5Vdc ( 2 for 24Vdc, 4 for 48Vdc)
High Voltage Alarm & Fault	16.0Vdc ( 2 for 24Vdc, 4 for 48Vdc)
High DC Input Recovery	15.5Vdc
Low Battery voltage recover	15.5Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Idle Consumption-Search Mode	< 25 W when Power Saver On
Charge
Input Voltage Range	Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC
Input Frequency Range	Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz \| Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage	Depends on battery type
Charger Breaker Rating	20A
Max Charge Rate	50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown	15.7V for 12Vdc ( 2 for 24Vdc, 4 for 48Vdc)
Charger curve(4 stage constant current) 4 step digital controlled progressive charge	Battery types ( 2 for 24Vdc, 4 for 48Vdc)
Battery type	Fast Vdc
Gel U.S.A	13.7
A.G.M 1	13.4
A.G.M 2	13.7
Sealed Lead Acid	13.6
Gel Euro	13.8
Open Lead Acid	13.3
Calcium	13.6
De-sulphation	15.5 for 4hrs
Remote Control	Yes. Optional
Bypass & Protection
Input Voltage Waveform	Sine wave (Grid or Generator)
Nominal Voltage	120Vac
Low Voltage Trip	184V/140V±4%
Low Voltage re engage	194V/150V±4%
High Voltage Trip	253V/270V±4%
High Voltage re engage	243V/260V±4%
Max Input AC Voltage	280VAC
Nominal Input Frequency	50Hz or 60Hz (Auto detect)
Low Freq Trip	Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage	Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip	Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage	Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection	Circuit breaker
Bypass breaker rating	30A
Transfer switch rating	30amp for UL
Max bypass current	30amp
Mechanical Specification
Mounting	Wall mount
Inverter Dimensions(LWH)	3883415200mm
Inverter Weight	27KG
Shipping Dimensions(LWH)	550x320x310mm
Shipping Weight	29KG
Display	Status LEDs / Status LEDs+LCD
Standard Warranty	1 Year