APC EASY UPS BV 800VA
Description
APC EASY UPS BV 800VA, AVR, Universal Outlet, 230VBest Value UPS with Battery Backup & Surge Protection for Electronics and Computers Includes: User Manual Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Allow flexibility for setup in tight locations and mounting on wall or other surfaces. Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations. Maximizes battery performance, life, and reliability through intelligent, precision charging. Provides temporary battery power when the utility power is out. Protect equipment with input transformer blocks without blocking access to other receptacles. Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery. Back up and protect your hardware and data during power outages, surges and spikes. Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. Provides notification of changing utility power and UPS power conditions Provide easy-to-read status of the unit and utility power conditions. Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Output power capacity
450 Watts / 800VA
Output Connections
(4) Universal receptacle (Battery Backup)
Nominal Output Voltage
230V
Nominal Input Voltage
230V
Input Connections
BS1363A British
Cord Length
1.5meters
APC EASY UPS BV 800VA, AVR, Universal Outlet, 230V
Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.
Includes: User manual
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.
There are no question found.
Quick Comparison
| Settings | APC EASY UPS BV 800VA remove | Prag 2kva 95-280v, Relay Voltage Stabilizer remove | Prag 20kva 95-280v Relay Voltage Stabilizer remove | APC EASY UPS BV 650VA remove | Mercury Elite Pro 2000VA UPS remove | Mercury Maverick UPS - 1050VA remove | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image |  |  |  | |  |  | ||||||||||||||||
| SKU | ||||||||||||||||||||||
| Rating | ||||||||||||||||||||||
| Price | ₦105,000.00 | ₦57,500.00 | ₦390,000.00 | ₦85,000.00 | ₦138,000.00 | ₦53,500.00 | ||||||||||||||||
| Stock |
20 in stock
|
20 in stock
|
20 in stock
| |||||||||||||||||||
| Description | Output power capacity 450 Watts / 800VA Output Connections (4) Universal receptacle (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections BS1363A British Cord Length 1.5meters | Output power capacity: 375watts / 650va Max configurable power (watts): 375watts / 650va Nominal output voltage: 230v Output frequency (not synced): 50/60 hz +/-1 hz Topology: line interactive Waveform type: stepped approximation to a sinewave Output connections: (6) iec 320 c13 (battery backup) Transfer time: 6ms typical : 10ms maximum Nominal input voltage: 230v Input frequency: 50/60 hz +/- 5 hz (auto sensing) Input connections: iec-320 c14 Cord length: 1.52meters Number of power cords: 1 Battery type: maintenance-free sealed lead-acid battery with suspended electrolyte: leakproof Expected battery life (years): 3 - 5 Efficiency: Communications & management: control panel LED status display with on line : on battery | Rating input voltage   2000 VA / 1200 W Rating input frequency   60/50Hz (auto sensing) Input phase   Single phase Input socket   With Fuse Rating output voltage (V)   220 Waveform   Battery mode (simulated sine wave), AC Voltage Regulation   ±10% (Battery mode) Rear output socket   4 x Universal - Battery backup Waveform   Simulated Sine Wave (Battery mode) Line Mode   Synchronize with the utility Rating frequency   60Hz or 50 Hz ± 1 Hz Battery Mode   Yellow flashing Short circuit protection Line Mode   Fuse & Firmware protection Short circuit protection Battery Mode   Firmware Protection Overload protection Line Mode   110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. Indicators AC mode   Green Lighting Indicators Battery Mode   Yellow Flashing Indicators Fault   Red Lighting Alarm Battery Mode   Sounding every 10 Seconds Alarm Low Battery   Sounding every Second Alarm Overload   Sounding every 0.5 second Alarm Fault   Continuously sounding Full Protection   Overload, discharge, and Overcharge protection Communication Interface   Optional RS232/RJ11 | Specification:  Model: - Capacity: 1050VA/630W  Input : - Voltage 220-240VAC - Voltage Range 140-300 VAC - Frequency: 50 / 60Hz - Current :4.8A Max Output: - Voltage Regulation (Bat.Mode): +/-10% - Frequency :50 / 60Hz - Waveform: Simulated Sine wave Battery: - Battery Type: 12V / 9AH x 1 - Charging ability: 6 hours recover to 90% capacity  Transfer Time: - Typical:2-6ms Protection : Short circuit, Overload, Battery discharge and overcharge, Surge Protection Indications: - Line Mode: Green lighting - Battery Mode :Yellow flashing - Fault: Red Lighting  Audible Alarm: - Battery Mode: Sounding every 10 sec - Battery low :Sounding every 1 sec - Overload : Sounding every 0.5 sec - Fault: Continuous sounding Environment: - Humidity 0-90% relative Humidity 0-40°C (Non-condensing) - Noise Level : Less than 40dB - Dimension: 283 X 101 X 140 | ||||||||||||||||||
| Weight | 6 | 5.4 | 38 | 0.2 | 3 | 8.5 | ||||||||||||||||
| Dimensions | N/A | 34 × 19 × 24 cm | 41 × 46 × 49 cm | N/A | N/A | N/A | ||||||||||||||||
| Additional information |
|
|
|
|
|
| ||||||||||||||||
| Add to cart |
Rating & Review
There are no reviews yet.