Don’t miss out great discount.

Mercury Elite Pro 2000VA UPS

138,000.00
26 people are viewing this right now
20 in stock
Estimated Delivery:
11 - 18 May, 2024
Trust Badge
Guaranteed safe & secure checkout

Description

MERCURY Line Interactive UPS (2000VA) – Elite 2000 ProWide input voltage rangeCompatible with generatorsOverload protectionShort circuit protectionBuilt-in AVRBattery deep discharge protection & overcharge protectionRating input voltage: 2000 VA / 1200 WRating input frequency: 60/50Hz (auto sensing)Input phase: Single phaseInput socket: With FuseCold Start (0 to 100% load): Press the ON/OFF SwitchInput Range (220V): 140-300Rating output (VA): 2000Rating output (W): 1200Power factor: 0.6Rating output voltage (V): 220Waveform: Battery mode (simulated sine wave), AC mode (sine wave)AC Voltage Regulation: ±10% (Battery mode)Rear output socket: 4 x Universal – Battery backupWaveform: Simulated Sine Wave (Battery mode)Line Mode: Synchronize with the utilityRating frequency: 60Hz or 50 Hz ± 1 HzBattery Mode: Yellow flashingShort circuit protection Line Mode: Fuse & Firmware protectionShort circuit protection Battery Mode: Firmware ProtectionOverload protection Line Mode: 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately.Overload protection Battery Mode: 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediatelyIndicators AC mode: Green LightingIndicators Battery Mode: Yellow FlashingIndicators Fault: Red LightingAlarm Battery Mode: Sounding every 10 SecondsAlarm Low Battery: Sounding every SecondAlarm Overload: Sounding every 0.5 secondAlarm Fault: Continuously soundingFull Protection: Overload, discharge, and Overcharge protectionTransfer Time: Typical 2-6ms, 10ms max.Transfer Time: Typical 2-6ms, 10ms max.Communication Interface: Optional RS232/RJ11Battery and runtime rating: 2 X 12V/9AHRecharge time – Typical: 6-8 hours recover to 90% capacityCharge current: About 1A at normal mode

Mercury Elite 2000 Pro Line Interactive UPS provides a relatively robust capacity for power backup to meet office as well as domestic power backup demands. With the Mercury Elite 2000 you not only get power backup for your equipment but also enjoy solid protection for those appliances. The built-in AVR function of the Elite 2000 Pro means dangerous power fluctuations won’t easily make mincemeat of your equipment.

Quick Comparison

SettingsMercury Elite Pro 2000VA UPS removeAPC EASY UPS BV 650VA removeMercury 3KVA 1-P ONLINE UPS removePrag 10kva 130-250v Stabilizer removePrag 2kva 45-280v Relay Voltage Stabilizer removeMercury Elite Pro 3000VA UPS remove
Image
SKU
Rating
Price
138,000.00
85,000.00
540,000.00
316,000.00
63,000.00
255,000.00
Stock
20 in stock
20 in stock
20 in stock
20 in stock
Out of stock
20 in stock
DescriptionRating input voltage    2000 VA / 1200 W Rating input frequency    60/50Hz (auto sensing) Input phase    Single phase Input socket    With Fuse Rating output voltage (V)    220 Waveform    Battery mode (simulated sine wave), AC Voltage Regulation    ±10% (Battery mode) Rear output socket    4 x Universal - Battery backup Waveform    Simulated Sine Wave (Battery mode) Line Mode    Synchronize with the utility Rating frequency    60Hz or 50 Hz ± 1 Hz Battery Mode    Yellow flashing Short circuit protection Line Mode    Fuse & Firmware protection Short circuit protection Battery Mode    Firmware Protection Overload protection Line Mode    110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. Indicators AC mode    Green Lighting Indicators Battery Mode    Yellow Flashing Indicators Fault    Red Lighting Alarm Battery Mode    Sounding every 10 Seconds Alarm Low Battery    Sounding every Second Alarm Overload    Sounding every 0.5 second Alarm Fault    Continuously sounding Full Protection    Overload, discharge, and Overcharge protection Communication Interface    Optional RS232/RJ11Output power capacity: 375watts / 650va Max configurable power (watts): 375watts / 650va Nominal output voltage: 230v Output frequency (not synced): 50/60 hz +/-1 hz Topology: line interactive Waveform type: stepped approximation to a sinewave Output connections: (6) iec 320 c13 (battery backup) Transfer time: 6ms typical : 10ms maximum Nominal input voltage: 230v Input frequency: 50/60 hz +/- 5 hz (auto sensing) Input connections: iec-320 c14 Cord length: 1.52meters Number of power cords: 1 Battery type: maintenance-free sealed lead-acid battery with suspended electrolyte: leakproof Expected battery life (years): 3 - 5 Efficiency: Communications & management: control panel LED status display with on line : on batteryCapacity: 3KVA / 2400W Phase: Single Phase Input voltage: 115VAC(±5) ~ 295VAC(±5) if load ≤ 70%; 160VAC(±5) ~ 295VAC(±5) if load ≥ 70% Frequency: 46 ~ 54(50Hz)±0.5Hz; 56 ~ 64(60Hz)±0.5Hz auto-sensing Overload capability: > 110%, 30s turn to bypass mode; > 150%, 300ms turn to bypass mode Crest factor: 3:1 (max)  
  • Input Voltage (130V-250V)
  • Steady output voltage
  • Digital Control
  • Servo Technology
  • Wall mounted
  • LED display
  • Low and Over voltage protection
Introducing the Prag 2KVA Relay Voltage Stabilizer, a reliable solution to protect your valuable electrical appliances from voltage fluctuations. This voltage stabilizer is designed to provide stable and consistent power supply, ensuring the optimal performance and longevity of your devices.Input voltage: 220VAC Input frequency: 50Hz Input phase: Single phase Input socket: With Fuse Cold Start (0 to 100% load): Press the ON/OFF switch Input range (220V): 140-300 Rating output (VA): 1200VA Rating output (W): 720W Waveform: Battery mode(simulated sine wave),AC mode(sine wave) Power factor: 0.6 Rating voltage: 220V Output range: 220Vac-7% to +15% in battery mode Rear Output Socket: 4 x Universal - Battery backup Transfer time: TYPICAL4-8ms Communication Interface: optional RS232/RJ11 Rating frequency: 50Hz Line-mode: Synchronize with the Utility
Weight30.228.1272510
DimensionsN/AN/A275 × 563 × 446 cm15 × 44 × 25 cm33 × 20 × 516 cmN/A
Additional information
Weight 3 kg
Weight 0.2 kg
Weight 28.1 kg
Dimensions 275 × 563 × 446 cm
Weight 27 kg
Dimensions 15 × 44 × 25 cm
Weight 25 kg
Dimensions 33 × 20 × 516 cm
Weight 10 kg
Add to cart

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Add to cart
Click outside to hide the comparison bar
Compare
0
1