Mercury 3KVA 1-P ONLINE UPS

Name: Mercury 3KVA 1-P ONLINE UPS
SKU: 22421
Price: 540000.00 NGN
Availability: InStock

Add to wishlist

₦540,000.00

(0 reviews)

20 people are viewing this right now

20 in stock

Estimated Delivery:

22 - 29 Sep, 2026

Guaranteed safe & secure checkout

Product details

Mercury 3kva Online UPS Single Phase HP930C-S
Mercury Online double-conversion UPS defends mission-critical servers, networking or telecommunications equipment from blackouts, brownouts, voltage fluctuations and surges.

High frequency and double conversion on-line technology
Fully digitized microprocessor control
Wide input voltage range
LCD display
UPS startup without battery
Cold start
Advanced battery management
Automatic battery charge in UPS off mode
Lightning and surge protection
Short circuit and overload protection
Fan speed auto control when loads vary
Network/Fax/Modem surge protection
Optional extension battery pack
Battery voltage display
Load capacity display
EMI/RFI noise filter
Smart RS232 communication with monitoring software
Optional SNMP card slot
EPO function(optional)
Input L and N reversed alarm function

Specifications
Capacity: 3KVA / 2400W
Phase: Single Phase
Input voltage: 115VAC(±5) ~ 295VAC(±5) if load ≤ 70%; 160VAC(±5) ~ 295VAC(±5) if load ≥ 70%
Frequency: 46 ~ 54(50Hz)±0.5Hz; 56 ~ 64(60Hz)±0.5Hz auto-sensing
Overload capability: > 110%, 30s turn to bypass mode; > 150%, 300ms turn to bypass mode
Crest factor: 3:1 (max)
AC Mode: 10 cycles, when voltage lower than rated 30%, and inrush current higher than rated 70%, turn off the inverter, no transfer to bypass,
give alarm battery Mode: 10 cycles, when voltage lower than rated 30%
and inrush curr not higher than rated 70%, turn off the inverter, give an alarm bypass Mode: Input fuse blew or break action
Waveform: Pure sine wave
Transfer time: 0ms between AC mode & Bypass mode
4ms (typical 2.5ms) between Inverter mode & Bypass mode
Model: 12V sealed lead acid maintenance-free
Battery: 8x 12V / 7AH
DC voltage: 96VDC
Back-up: 12min (half load); 5min (full load)
Recharge time: 8hours ~ 90% capacity
Charge current: 1A(standard unit);6A(long-time unit)
Communication interface: RS232 ; SNMP (optional)
LED indication: Load or battery capacity
Dimension (WxDxH)mm 190 x 468 x 339
Packing(WxDxH)mm 275 x 563 x 446

Quick Comparison

APC EASY UPS BV 650VA remove Mercury 10KVA AVR - 1 Phase - Servo Stabilizer remove Mercury 15KVA AVR, 1 Phase, Servo Type Stabilizer remove Vertiv itON 1000VA E 230V IEC-IEC UPS remove APC EASY UPS BV 1000VA remove

Name APC EASY UPS BV 650VA remove Mercury 10KVA AVR - 1 Phase - Servo Stabilizer remove Mercury 15KVA AVR, 1 Phase, Servo Type Stabilizer remove Vertiv itON 1000VA E 230V IEC-IEC UPS remove APC EASY UPS BV 1000VA remove

Image

SKU

Rating

Price

Save 5%

₦670,000.00

Save 3%

₦99,000.00

Save 1%

Stock

20 in stock

Out of stock

20 in stock

Availability 20 in stock 20 in stock Out of stock 20 in stock

Add to cart

Description

Output power capacity: 375watts / 650va Max configurable power (watts): 375watts / 650va Nominal output voltage: 230v Output frequency (not synced): 50/60 hz +/-1 hz Topology: line interactive Waveform type: stepped approximation to a sinewave Output connections: (6) iec 320 c13 (battery backup) Transfer time: 6ms typical : 10ms maximum Nominal input voltage: 230v Input frequency: 50/60 hz +/- 5 hz (auto sensing) Input connections: iec-320 c14 Cord length: 1.52meters Number of power cords: 1 Battery type: maintenance-free sealed lead-acid battery with suspended electrolyte: leakproof Expected battery life (years): 3 - 5 Efficiency: Communications & management: control panel LED status display with on line : on battery

Mercury 10KVA AVR - 1 Phase - Servo Stabilizer (Input voltage: 100V-255V AC

Power: 10KVA
Technology: Relay Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 220V ± 10%
Phase: Single
Compact Design – Sleek & handy. Get the Mercury 10kVA AVR for that all-important voltage protection to your equipment. With the Mercury 10kVA AVR, you can support heavy-duty equipment or a number of appliances at a stretch.Power fluctuations are common and for anyone using power generators (and who doesn’t?), the risk of voltage fluctuations is even higher. What you must know, also, is that voltage fluctuations can damage your important appliances, causing you financial loss.Automatic voltage regulators, AVR, provide the voltage stabilization that will protect your sensitive equipment. AVRs, commonly called stabilizers, are designed to stabilize the voltage. That not only helps your equipment to function optimally but protects them from damage. The AVR will take a wide input voltage range and output a regulated voltage range that is safe for your equipment.Having an AVR that delivers the expected result is a different matter, though. All AVRs are not made equal. And you need an AVR that does an effective job of providing the voltage stabilization that is imperative to keep your valued equipment safe.

That is where Mercury brand AVRs come in. Mercury AVRs are built to high standards and offer efficient voltage regulation function. With Mercury AVR, you get the result that you expect, with your equipment enjoying that all-important protection from voltage-induced damage. These Mercury AVRs also deliver the durability users expect, serving you for years on end. This is a quality stabilizer, suitable for home appliances and office equipment FEATURES:

Small Footprint
Wide Application
High cost effective & High power density
Automatic Control Circuit
High Quality Components
Ring Transformer Structure
Minimum Magnetic Leakage
Convenient Daily Maintenance
Stable Performance and Reliability
No Additional Distortion of Output Waveform
High Precision Auto Voltage Regulator Power Supply
Multi-layer Structure Carbon Brush with Long Service Time
High Adaptability to all kinds of non linear loads such as Inductive load and Capacitive load

Power: 15KVA
Technology: Relay Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 220V ± 10%
Phase: Single

1000va UPS 2 years replacement warranty

Output Power capacity:600 watts/1.0 KVA
Maximum Configurable Power (Watts):600 Watts/1.0KVA
Nominal Output Voltage:230V
Topology: Line Interactive
Waveform Type: Stepped Approximation to a Sine wave
Transfer Time:6 minutes:10 minutes maximum
Cord Length:1.52 Meters
Number of cords:1
Input Connections’ -320 C14
Battery Type: Maintenance -free sealed Lead-Acid battery with suspended electrolyte: leak proof

Content

APC EASY UPS BV 650VA, AVR, Universal Outlet, 230V

Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers.

Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

Provides early-warning fault analysis on batteries, enabling timely preventive maintenance

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Provides temporary battery power when the utility power is out.

Protect equipment with input transformer blocks without blocking access to other receptacles.

The slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Back up and protect your hardware and data during power outages, surges and spikes.

Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.

Provides notification of changing utility power and UPS power conditions

Provide easy-to-read status of the unit and utility power conditions.

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

" alt="Mercury 10KVA AVR 1 Phase Servo Stabilizer" width="500" height="500" data-src="https://www.digitaldirectng.com/wp-content/uploads/2023/04/Mercury-10KVA-AVR-1-Phase-Servo-Stabilizer.jpg" />

Mercury 10KVA AVR – 1 Phase – Servo Stabilizer

Mercury 10KVA AVR - 1 Phase - Servo Stabilizer (Input voltage: 100V-255V AC

Power: 10KVA
Technology: Relay Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 220V ± 10%
Phase: Single
Compact Design – Sleek & handy. Get the Mercury 10kVA AVR for that all-important voltage protection to your equipment. With the Mercury 10kVA AVR, you can support heavy-duty equipment or a number of appliances at a stretch.Power fluctuations are common and for anyone using power generators (and who doesn’t?), the risk of voltage fluctuations is even higher. What you must know, also, is that voltage fluctuations can damage your important appliances, causing you financial loss.Automatic voltage regulators, AVR, provide the voltage stabilization that will protect your sensitive equipment. AVRs, commonly called stabilizers, are designed to stabilize the voltage. That not only helps your equipment to function optimally but protects them from damage. The AVR will take a wide input voltage range and output a regulated voltage range that is safe for your equipment.Having an AVR that delivers the expected result is a different matter, though. All AVRs are not made equal. And you need an AVR that does an effective job of providing the voltage stabilization that is imperative to keep your valued equipment safe.

Small Footprint
Wide Application
High cost effective & High power density
Automatic Control Circuit
High Quality Components
Ring Transformer Structure
Minimum Magnetic Leakage
Convenient Daily Maintenance
Stable Performance and Reliability
No Additional Distortion of Output Waveform
High Precision Auto Voltage Regulator Power Supply
Multi-layer Structure Carbon Brush with Long Service Time
High Adaptability to all kinds of non linear loads such as Inductive load and Capacitive load

Description: Mercury Stabilizer 15KVA AVR|1 Phase Servo Type MER-ZTY15

Input voltage: 100V-255V AC
Power: 15KVA
Technology: Relay Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 220V ± 10%
Phase: Single

Compact Design – Sleek & handy Get the Mercury 15kVA AVR servo stabilizer for that all-important voltage protection to your equipment. With the Mercury 15kVA AVR, you can support heavy-duty equipment or a number of appliances at a stretch. Power fluctuations are common and for anyone using power generators (and who doesn’t?), the risk of voltage fluctuations is even higher. What you must know, also, is that voltage fluctuations can damage your important appliances, causing you financial loss. Automatic voltage regulators, AVR, provide the voltage stabilization that will protect your sensitive equipment. AVRs, commonly called stabilizers, are designed to stabilize the voltage. That not only helps your equipment to function optimally but protects them from damage. The AVR will take a wide input voltage range and output a regulated voltage range that is safe for your equipment. Having an AVR that delivers the expected result is a different matter, though. All AVRs are not made equal. And you need an AVR that does an effective job of providing the voltage stabilization that is imperative to keep your valued equipment safe.

The Liebert® PSA itON is a feature-rich reliable line-interactive UPS designed for desktop computer workstations and stand-alone IT equipment. It has an automatic voltage regulator (AVR) that allows flexibility and reliability for PCs and other sensitive electronic equipment. Designed with simple controls for easy operation, the Liebert® PSA itON provides more than enough time to save work in the process before shutting down the system. Features

Automatic voltage regulator (AVR)
Compact size
Lightweight
Easy operation.
Higher Availability
Overload protection and alarm
Auto re-start with AC recovery
Fast charging
Cold start function.

Ideally Suited for:

Desktop PCs
Professional workstations
Small routers, bridges and hubs
Point-of-sale terminals
PBXs
Other sensitive electronics.

Key Advantages

AVR features give higher application availability by correcting high and low voltage without using valuable battery power
Shutdown software provides graceful and unattended system shutdown for PC and workstations in the event of an extended power outages to ensure data integrity

Best Value UPS with Battery Backup and Surge Protection for Electronics and Computers Automatic voltage regulation: Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Wall-mount holes: Allow flexibility for set up in tight locations and mount on walls or other surfaces Battery and Surge Protected Outlets: Back up and protect your hardware and data during power outages, Surges, and Spikes. Battery backup and Surge Protection: Outlets provides abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. Audible Alarms: Provides notification of changing utility power and UPS power conditions SLEEK DESIGN: Slim, modern design can be upright, flat or wall-mounted to comfortably fit any electronic set-up and complement Home decor. Transformer-block spaced outlets: Protect equipment with input transformer blocks without blocking access to other receptacles. Cold-start capable: Provides temporary battery power when the utility power is out. Boost Automatic Voltage Regulations (AVR): Preserves battery life and maximizes run time by correcting low voltages without discharging the batteries. Battery failure notification: Provides early-warning fault analysis on battery enabling timely preventive maintenance. Advanced Safety Features: Safeguards your Home UPS from overloads, excessive mains voltage, short circuits, installation mishaps and battery damage due to low voltage situations

Weight 0.2 kg 20 kg 60 kg 5 kg 7 kg

Dimensions N/A N/A N/A N/A N/A

Additional information

Weight	0.2 kg

Weight	20 kg

Weight	60 kg

Weight	5 kg

Weight	7 kg

Sold 0 0 0 0 0

Shipping

Subtotal	₦0.00
Total	₦0.00

Mercury 3KVA 1-P ONLINE UPS

Product details

Shipping and Returns

Rating & Review

Question & Answer

Quick Comparison

Mercury 10KVA AVR – 1 Phase – Servo Stabilizer

Mercury Maverick 850VA UPS

APC EASY UPS SMV 700WATTS/1000VA

Mercury 15KVA AVR, 1 Phase, Servo Type Stabilizer

Prag 15kva 45v-280v Relay Voltage Stabilizer

Mercury Elite Pro 2000VA UPS

Mercury 3KVA 1-P ONLINE UPS

Product details

Shipping and Returns

Rating & Review

Question & Answer

Quick Comparison

Mercury 10KVA AVR – 1 Phase – Servo Stabilizer

Related products

Mercury Maverick 850VA UPS

APC EASY UPS SMV 700WATTS/1000VA

Mercury 15KVA AVR, 1 Phase, Servo Type Stabilizer

Prag 15kva 45v-280v Relay Voltage Stabilizer

Mercury Elite Pro 2000VA UPS

Shopping Cart