Don’t miss out great discount.

Prag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT

2,700,000.00
28 people are viewing this right now
Estimated Delivery:
16 - 23 Oct, 2025
Trust Badge
Guaranteed safe & secure checkout

Product details

PRAG 10KVA 48V INVERTER W-EY (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today.

PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.

PRAG 10KVA 48V INVERTER Features

  • Powerful Pure Sine Wave (PSW) Inverter/Charger
  • 13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
  • High efficiency design and Power Saving Mode to conserve energy
  • 8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
  • 4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
  • 8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
  • 15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
  • Battery DOD (Depth of Discharge) setting from 50%
  • Easy and straightforward installation
  • Designed to operate under harsh environment
  • DC Start and Automatic Self Diagnostic (ASD) function
  • Compatible with Linear and Non-Linear loads
  • Low DC Voltage home and office appliances support
  • Up to 120Amp charging current selectable from 0%-100%
  • Battery priority mode for preferred UPS configuration

 

Inverter Output
Model PT-INV-10KVA/9000W 48V-Color LED, Wall-H
Continuous Output Power 9000W
Surge Rating(20s) 24000W
Capable of Starting Electric Motor 8HP
Output Waveform Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency >88%(Peak)
Line Mode Efficiency >95%
Power Factor 0.9-1.0
Nominal Output Voltage rms  220-230-240Vac
Output Voltage Regulation ±10% RMS
Output Frequency 50± 0.3Hz/60± 0.3Hz
Short Circuit Protection Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time 10ms(Max)
THD < 10%
DC Input
Nominal Input Voltage 12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Alarm 10.5Vdc/11.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Trip 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High Voltage Alarm & Fault 16.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High DC Input Recovery 15.5Vdc
Low Battery voltage recover 15.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Idle Consumption-Search Mode < 25 W when Power Saver On
Charge
Input Voltage Range Wide: 90~135VAC / 164~243VAC
Narraw: 100~135VAC / 194~243VAC
Input Frequency Range Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage Depends on battery type
Charger Breaker Rating 40A
Max Charge Rate 50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current)
4 step digital controlled progressive charge
Battery types ( *2 for 24Vdc, *4 for 48Vdc)
Battery type Float Vdc
Gel U.S.A 13.7
A.G.M 1 13.4
A.G.M 2 13.7
Sealed Lead Acid 13.6
Gel Euro 13.8
Open Lead Acid 13.3
Calcium 13.6
De-sulphation 15.5 for 4hrs
Remote Control Yes. Optional
Bypass & Protection
Input Voltage Waveform Sine wave (Grid or Generator)
Nominal Voltage 220Vac
Low Voltage Trip 184V/140V±4%
Low Voltage re engage 194V/150V±4%
High Voltage Trip 253V/270V±4%
High Voltage re engage 243V/260V±4%
Max Input AC Voltage 280VAC
Nominal Input Frequency 50Hz or 60Hz (Auto detect)
Low Freq Trip Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz
Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz
Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz
Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz
Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection Circuit breaker
Bypass breaker rating 63A
Transfer switch rating 80amp for UL
Max bypass current 80amp
Mechanical Specification
Mounting Wall mount
Inverter Dimensions(L*W*H) 588*415*200mm
Inverter Weight 66KG
Shipping Dimensions(L*W*H) 750x520x310mm
Shipping Weight 68KG
Display Status LEDs / Status LEDs+LCD
Standard Warranty 1 Year

Quick Comparison

Prag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT removeMercury 1.2Kva/740Kw 12VDC, Transformerless, Modified Sinewave Inverter removeiPower XMAX Inverter 3KVA/3KW/80Amp Axpert VMII Premium -24VDC removePrag 5kw Adv Modular Solar Inverter-VT removeiPower 200Ah/12V Slim Inverter Battery removePrag 7.5KVA - 48V Pure Sine Wave Inverter - Wall Mount remove
NamePrag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT removeMercury 1.2Kva/740Kw 12VDC, Transformerless, Modified Sinewave Inverter removeiPower XMAX Inverter 3KVA/3KW/80Amp Axpert VMII Premium -24VDC removePrag 5kw Adv Modular Solar Inverter-VT removeiPower 200Ah/12V Slim Inverter Battery removePrag 7.5KVA - 48V Pure Sine Wave Inverter - Wall Mount remove
ImagePrag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VTMercury 1.2Kva/740Kw 12VDC, Transformerless, Modified Sinewave InverteriPower XMAX Inverter 3KVA/3KW/80Amp Axpert VMII Premium -24VDCPrag 5kw Adv Modular Solar Inverter-VTiPower 200Ah/12V Slim Inverter BatteryPrag 7.5KVA - 48V Pure Sine Wave Inverter - Wall Mount
SKU
Rating
Price
2,700,000.00
173,000.00
475,000.00
1,560,000.00
400,000.00
1,240,000.00
Stock
20 in stock
20 in stock
20 in stock
Availability20 in stock20 in stock20 in stock
Add to cart

DescriptionPRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.Model 1.2k Voltage 230VAC Capacity 1200VA/720W Voltage Range 170-280VAC (UPS Mode) 90-280 VAC (INV Mode) Voltage Regulation(Battery Mode) 230VAC +/-10% Transfer Time 20 ms Typical Waveform Modified Sine Wave Battery Voltage 12VDC Floating Charge Voltage 13.75VDC +-0.25 Charge Current 10/20A Dimension 330 x 227.8 x 92.5 Net Weight (Kgs) 2.6 Gross Weight (Kgs) 3.1
  • A smart battery charger that optimizes battery performance
  • Selectable charging current depending on the applications
  • Selectable input voltage range
  • Configurable solar/AC input priority
  • Auto restart while AC recovers
  • A perfect alarming system
Inverter Output Model   5K-48 Power Rating     5000W Parallel Capability            up to 9 units   INPUT Voltage 230 VAC Voltage Range   110 – 280 VAC Frequency Range             60/50 Hz (Auto Sensing) OUTPUT Efficiency (Peak)               93% at line mode, 90% at battery mode Surge Power      10000 VA for 5 sec Transfer Time    0 ms Waveform          Pure Sine Wave   BATTERY Battery Voltage 48 VDC Floating Charge Voltage 54 VDC Overcharging Protection               66 VDC   SOLAR CHARGER & AC CHARGER Solar Charger Type          MPPT Maximum PV Array Open Circuit Voltage               145 VDC Maximum PV Array Power           4000 W MPPT Range @ Operating Voltage            60 VDC ~115 VDC Maximum Solar Charge Current 80 A Maximum AC Charge Current     60 A Maximum Charge Current            140 A Maximum Efficiency       98% Standby Power Consumption     2 W   PHYSICAL Dimension, D x W x H (mm)         140 x 303 x 525 Net Weight (Kgs)              13.5 Communication Port       USB/RS232/RS485/Bluetooth/Dry-contact   OPERATING ENVIRONMENT
  • Front Terminal Hybrid GEL 6-GFMF-200J
  • Strong Containers/Covers.
  • Excellent charge acceptance.
  • Withstands Deep Discharge and Overcharge.
  • Performs under extreme conditions.
  • Intercell Welding reduces chances of accidental short-circuiting of cells.
PRAG 7.5KVA – 48V Inverter H-Series (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak conversion efficiency of 88%.
ContentPRAG 10KVA 48V INVERTER W-EY (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today. PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame. PRAG 10KVA 48V INVERTER Features
  • Powerful Pure Sine Wave (PSW) Inverter/Charger
  • 13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
  • High efficiency design and Power Saving Mode to conserve energy
  • 8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
  • 4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
  • 8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
  • 15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
  • Battery DOD (Depth of Discharge) setting from 50%
  • Easy and straightforward installation
  • Designed to operate under harsh environment
  • DC Start and Automatic Self Diagnostic (ASD) function
  • Compatible with Linear and Non-Linear loads
  • Low DC Voltage home and office appliances support
  • Up to 120Amp charging current selectable from 0%-100%
  • Battery priority mode for preferred UPS configuration
 
Inverter Output
Model PT-INV-10KVA/9000W 48V-Color LED, Wall-H
Continuous Output Power 9000W
Surge Rating(20s) 24000W
Capable of Starting Electric Motor 8HP
Output Waveform Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency >88%(Peak)
Line Mode Efficiency >95%
Power Factor 0.9-1.0
Nominal Output Voltage rms  220-230-240Vac
Output Voltage Regulation ±10% RMS
Output Frequency 50± 0.3Hz/60± 0.3Hz
Short Circuit Protection Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time 10ms(Max)
THD < 10%
DC Input
Nominal Input Voltage 12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Alarm 10.5Vdc/11.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Trip 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High Voltage Alarm & Fault 16.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High DC Input Recovery 15.5Vdc
Low Battery voltage recover 15.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Idle Consumption-Search Mode < 25 W when Power Saver On
Charge
Input Voltage Range Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC
Input Frequency Range Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage Depends on battery type
Charger Breaker Rating 40A
Max Charge Rate 50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current) 4 step digital controlled progressive charge Battery types ( *2 for 24Vdc, *4 for 48Vdc)
Battery type Float Vdc
Gel U.S.A 13.7
A.G.M 1 13.4
A.G.M 2 13.7
Sealed Lead Acid 13.6
Gel Euro 13.8
Open Lead Acid 13.3
Calcium 13.6
De-sulphation 15.5 for 4hrs
Remote Control Yes. Optional
Bypass & Protection
Input Voltage Waveform Sine wave (Grid or Generator)
Nominal Voltage 220Vac
Low Voltage Trip 184V/140V±4%
Low Voltage re engage 194V/150V±4%
High Voltage Trip 253V/270V±4%
High Voltage re engage 243V/260V±4%
Max Input AC Voltage 280VAC
Nominal Input Frequency 50Hz or 60Hz (Auto detect)
Low Freq Trip Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection Circuit breaker
Bypass breaker rating 63A
Transfer switch rating 80amp for UL
Max bypass current 80amp
Mechanical Specification
Mounting Wall mount
Inverter Dimensions(L*W*H) 588*415*200mm
Inverter Weight 66KG
Shipping Dimensions(L*W*H) 750x520x310mm
Shipping Weight 68KG
Display Status LEDs / Status LEDs+LCD
Standard Warranty 1 Year
The re-engineered Mercury 1200VA (1.2kva) inverter, now comes with an LCD display to enable the user monitor the operating status of the equipment. Better still, this tough, hard-working, low cost inverter has been upgraded for better performance and more durability. You really get virtually everything you desire: good performance, extended durability, trusted technical support and best of all, low pricing! The Mercury Radiant modified sine wave inverters have remained in a class of their own, offering top performance at amazingly low pricing. Compared to other available inverter options, this is the best value inverter - costing so little and still delivering the power backup performance that users require. If you simply want to get the job done, at the best possible price, without worrying much about the waveform, these modified sine wave Mercury inverters are the perfect fit. They function well, are durable and are priced pretty low. For most domestic appliances, this class of inverters will meet your power supply objective, costing far less than the pure sine wave alternatives. NEW LCD DISPLAY to MONITOR PERFORMANCE Now you can easily keep a close eye on the performance of your equipment, with an LCD display to constantly show its operating status. In particular, you can easily see the level of your battery, helping you decide when to recharge your batteries without letting them get dangerously low. Very deep discharge is harmful to your batteries, shortening their lifespan. So, there's a big value in a display that helps you track your battery level. Other critical performance indices are also available to help you optimize the use of your inverter. TRUSTED PERFORMANCE, HANDY TECHNICAL SUPPORT The Mercury MSV inverter range offers a cheaper access to the use of inverters, enabling more households enjoy the extraordinary benefits of inverter use. Mercury Radiant inverters are in wide use in Nigeria, the result of their impressive performance, even at a low cost. Best of all, the available Kobian service centres, maintained across Nigeria by the manufacturer, ensure that your equipment is supported to keep it running. While there is a solid one year warranty with free maintenance, technical support remains readily available even after the warranty period. So, you can be sure to keep using your Mercury inverter far into the future. Little expenditure, huge value! 12VDC BATTERY VOLTAGE The 1200VA (1.2kva) Mercury inverter is a 12V system. Only one 12V battery is required to run this inverter. The battery capacity would be your choice (depending on intended function), but larger capacity batteries of 200Ah/12V and higher would be preferred for better energy storage capacity. While lower battery capacity of 12V will still operate the inverter, your backup time could be short, with the added adverse impact on battery durability. Batteries that get run down fast and deep (due to inadequate capacity) are likely to die faster than their ideal lifespan. RATED CAPACITY The 1.2kva Mercury inverter is rated at 720W. To enjoy reasonable backup performance from this inverter, however, you should aim at much lower total load. At 100% capacity load, your inverter will deliver a very short backup performance. To enjoy longer backup, you will have to scale down, knowing that the lower your load gets, the longer the inverter runs on a battery charge. TECHNICAL SPECIFICATIONS Here are the specs of the 1200VA Mercury inverter: Model 1.2k Voltage 230VAC Capacity 1200VA/720W Voltage Range 170-280VAC (UPS Mode) 90-280 VAC (INV Mode) Voltage Regulation(Battery Mode) 230VAC +/-10% Transfer Time 20 ms Typical Waveform Modified Sine Wave Battery Voltage 12VDC Floating Charge Voltage 13.75VDC +-0.25 Charge Current 10/20A Dimension 330 x 227.8 x 92.5 Net Weight (Kgs) 2.6 Gross Weight (Kgs) 3.1
Brand iPower
Warranty Period 1 Year
MODEL iPowerxMaX3000-24
RatedPower 3000VA/3000W
INPUT
Voltage 230VAC
SelectableVoltageRange 170-280VAC(ForPersonalComputers); 90- 280 VAC(ForHomeAppliances)
FrequencyRange 50Hz/60Hz(Autosensing)
OUTPUT
ACVoltageRegulation(Batt.Mode) 230VAC±5%
SurgePower 6000VA
Efficiency(Peak) 90%~93%
TransferTime 10ms(ForPersonalComputers);20ms(For HomeAppliances)
Waveform Puresinewave
BATTERY
BatteryVoltage 24VDC
FloatingChargeVoltage 27VDC
OverchargeProtection 32VDC
SOLARCHARGER&ACCHARGER
SolarChargerType MPPT
MaximumPVArrayOpenCircuitVoltage 450VDC
MaximumPVArrayPower 3000W
MPPRange@OperatingVoltage 60-400VDC
MaximumSolarChargeCurrent 80A
MaximumAC ChargeCurrent 80A
MaximumChargeCurrent 80A
PHYSICAL
Dimension,DxWxH(mm) 100x288x390
NetWeight(kgs) 8.0
CommunicationInterface RS232
ENVIRONMENT
Humidity 5%to95%RelativeHumidity(Non- condensing)
OperatingTemperature -10°Cto50°C
StorageTemperature -15°Cto60°C
  • Pure Sine wave Solar Inverter
  • Advanced Inverter
  • In-Built MPPT solar charge controller
  • Online UPS: Zero transfer time, perfect for critical devices such as Servers and ATMs
  • Modular/Parallel Operation: up to 9 units of this inverter can be combined to give a maximum of 45KW
  • Detachable LCD control module with multiple communications
  • Built-in Bluetooth for mobile monitoring (Android App is available)
  • Lithium Battery Charging Compatible
  • Supports USB On-the-Go function
  • Reserved communication port for BMS (RS485, CAN-BUS or RS232)
iPower 200AH battery is a deep cycled sealed maintenance-free battery designed for inverters, telecommunication and other applications involving battery back-up need that involve continuous charging and discharging. This battery is designed to store DC power and which is converted to AC in orther to power your home appliances, when there is no public power supply available. This iPowerPlus Inverter battery is 200AH with 12V. The battery is nicely structed, giving a slim body with lasting power.Perfect Match for your Inverter Systems.Performs under extreme conditions.Withstands Deep Discharge and Overcharge.Excellent protection against leakage and corrosion.Strong Containers/Covers.Intercell Welding reduces chances of accidental short-circuiting of cells.Special Lead Alloy Composition.Excellent charge acceptance.Large electrolyte volume.Microporous PVC Separators.PRAG 7.5KVA – 48V Inverter H-Series (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak conversion efficiency of 88%. So, it is packed with unique features and it is one of the most advanced inverter/chargers in the market today. Furthermore, the PRAG 7.5KVA – 48V Inverter H-Series (Pure Sine Wave) features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment. Subsequently, PRAG 7.5KVA – 48V Inverter H-Series (Pure Sine Wave) is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.

PRAG 7.5KVA – 48V Inverter Features

  • The PRAG Inverter is Easy to Install and Easy to Operate. This inverter is also Easy to Solve
  • It is also designed to Operate under Harsh Environment
  • The Inverter comes with the ability to do a DC Start & Automatic Self-Diagnostic Function
  • It is Compatible with Both Linear & Non-Linear Load
  • Low DC Voltage Supports Home & Office Appliances on the inverter
  • With this PRAG Inverter, you can enjoy Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
  • High Efficiency Inverter Design & “Power Saving Mode” to Conserve Energy
  • Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
  • 13 Vdc Inverter Battery Recover Point, Dedicated for Renewable Energy Systems
  • 8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Inverter Batteries
  • 4-step Intelligent battery Charging, PFC (Power Factor Correction) for Charger
  • 8 ms Typical Transfer Time Between Utility & Inverter Battery, Guarantees Power Continuity
  • 15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
  • Battery DOD(Depth of Discharge)setting from 50% to 100%
WeightN/A3.1 kg8 kgN/A61 kgN/A
DimensionsN/A330 × 227.8 × 92.5 cm100 × 288 × 390 cmN/AN/AN/A
Additional information
Weight 3.1 kg
Dimensions 330 × 227.8 × 92.5 cm
Weight 8 kg
Dimensions 100 × 288 × 390 cm
Weight 61 kg
Sold000000
Shipping
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Add to cart
Click outside to hide the comparison bar
Compare