Don’t miss out great discount.

Prag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT

2,700,000.00
25 people are viewing this right now
Estimated Delivery:
15 - 22 Oct, 2025
Trust Badge
Guaranteed safe & secure checkout

Product details

PRAG 10KVA 48V INVERTER W-EY (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today.

PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.

PRAG 10KVA 48V INVERTER Features

  • Powerful Pure Sine Wave (PSW) Inverter/Charger
  • 13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
  • High efficiency design and Power Saving Mode to conserve energy
  • 8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
  • 4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
  • 8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
  • 15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
  • Battery DOD (Depth of Discharge) setting from 50%
  • Easy and straightforward installation
  • Designed to operate under harsh environment
  • DC Start and Automatic Self Diagnostic (ASD) function
  • Compatible with Linear and Non-Linear loads
  • Low DC Voltage home and office appliances support
  • Up to 120Amp charging current selectable from 0%-100%
  • Battery priority mode for preferred UPS configuration

 

Inverter Output
Model PT-INV-10KVA/9000W 48V-Color LED, Wall-H
Continuous Output Power 9000W
Surge Rating(20s) 24000W
Capable of Starting Electric Motor 8HP
Output Waveform Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency >88%(Peak)
Line Mode Efficiency >95%
Power Factor 0.9-1.0
Nominal Output Voltage rms  220-230-240Vac
Output Voltage Regulation ±10% RMS
Output Frequency 50± 0.3Hz/60± 0.3Hz
Short Circuit Protection Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time 10ms(Max)
THD < 10%
DC Input
Nominal Input Voltage 12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Alarm 10.5Vdc/11.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Trip 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High Voltage Alarm & Fault 16.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High DC Input Recovery 15.5Vdc
Low Battery voltage recover 15.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Idle Consumption-Search Mode < 25 W when Power Saver On
Charge
Input Voltage Range Wide: 90~135VAC / 164~243VAC
Narraw: 100~135VAC / 194~243VAC
Input Frequency Range Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage Depends on battery type
Charger Breaker Rating 40A
Max Charge Rate 50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current)
4 step digital controlled progressive charge
Battery types ( *2 for 24Vdc, *4 for 48Vdc)
Battery type Float Vdc
Gel U.S.A 13.7
A.G.M 1 13.4
A.G.M 2 13.7
Sealed Lead Acid 13.6
Gel Euro 13.8
Open Lead Acid 13.3
Calcium 13.6
De-sulphation 15.5 for 4hrs
Remote Control Yes. Optional
Bypass & Protection
Input Voltage Waveform Sine wave (Grid or Generator)
Nominal Voltage 220Vac
Low Voltage Trip 184V/140V±4%
Low Voltage re engage 194V/150V±4%
High Voltage Trip 253V/270V±4%
High Voltage re engage 243V/260V±4%
Max Input AC Voltage 280VAC
Nominal Input Frequency 50Hz or 60Hz (Auto detect)
Low Freq Trip Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz
Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz
Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz
Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz
Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection Circuit breaker
Bypass breaker rating 63A
Transfer switch rating 80amp for UL
Max bypass current 80amp
Mechanical Specification
Mounting Wall mount
Inverter Dimensions(L*W*H) 588*415*200mm
Inverter Weight 66KG
Shipping Dimensions(L*W*H) 750x520x310mm
Shipping Weight 68KG
Display Status LEDs / Status LEDs+LCD
Standard Warranty 1 Year

Quick Comparison

Prag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT removePrag 3kw Premium Solar Inverter-VT removePrag 4kva 24v Pure Sine Wave Inverter - Wall Mount removeiPower XMAX Inverter 3KVA/3KW/80Amp Axpert VMII Premium -24VDC removePrag 7.2kw Adv Modular Solar Inverter-VT removeiPowerplus 3KVA/24V Inverter remove
NamePrag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT removePrag 3kw Premium Solar Inverter-VT removePrag 4kva 24v Pure Sine Wave Inverter - Wall Mount removeiPower XMAX Inverter 3KVA/3KW/80Amp Axpert VMII Premium -24VDC removePrag 7.2kw Adv Modular Solar Inverter-VT removeiPowerplus 3KVA/24V Inverter remove
ImagePrag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VTPrag 3kw Premium Solar Inverter-VTPrag 4kva 24v Pure Sine Wave Inverter - Wall MountiPower XMAX Inverter 3KVA/3KW/80Amp Axpert VMII Premium -24VDCPrag 7.2kw Adv Modular Solar Inverter-VTiPowerplus 3KVA/24V Inverter
SKU
Rating
Price
2,700,000.00
710,000.00
965,000.00
475,000.00
2,245,000.00
Original price was: ₦414,000.00.Current price is: ₦400,000.00.
Save 3%
Stock
20 in stock
20 in stock
Availability20 in stock20 in stock
Add to cart

DescriptionPRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.Upgrade your energy system with the versatile and efficient 3KW/24V Hybrid Inverter (3000W-MPPT). Designed for both flexibility and reliability, this inverter seamlessly operates with or without a battery, ensuring uninterrupted power supply in diverse conditions.PRAG H-Series Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak conversion efficiency of 88%. It is packed with unique features and it is one of the most advanced inverter/chargers in the market today. It features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment. PRAG H-Series Inverter is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.
  • A smart battery charger that optimizes battery performance
  • Selectable charging current depending on the applications
  • Selectable input voltage range
  • Configurable solar/AC input priority
  • Auto restart while AC recovers
  • A perfect alarming system
Inverter Output Model   7.2K-48 Power Rating     7200W   INPUT Voltage 230 VAC Selectable Voltage Range             170 – 280 VAC (For Personal Computer); 90-280 VAC (For Home Appliances) Frequency Range             50/60 Hz (Auto Sensing) OUTPUT AC Voltage Regulation (Batt. Mode)         230 VAC ±5% Surge Power      15000 VA Efficiency (Peak)               90% – 93% Transfer Time    15 ms (For Personal Computers); 20 ms (For Home Appliances) Waveform          Pure Sine Wave   BATTERY Battery Voltage 48 VDC Floating Charge Voltage 54 VDC Overcharging Protection               63 VDC   SOLAR CHARGER & AC CHARGER Solar Charger Type          MPPT Maximum PV Array Open Circuit Voltage               500 VDC Maximum PV Array Power           8000 W (4000W *2) MPPT Range @ Operating Voltage            90 VDC ~450 VDC Maximum Solar Charge Current 80 A Maximum AC Charge Current     80 A Maximum Charge Current            80 A   PHYSICAL Dimension, D x W x H (mm)         147.4 x 432.5 x 553.6 Net Weight (Kgs)              18.4 Communication Port       USB/RS232/RS485/Bluetooth/Dry-contact   OPERATING ENVIRONMENT Operating Humidity         5% to 95% Relative Humidity (Non – condensing) Operating Temperature -10C to 50C Storage Temperature     -15C to 60 C   Standard Compliance Safety
  • Hybrid System
  • 3KVA
ContentPRAG 10KVA 48V INVERTER W-EY (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today. PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame. PRAG 10KVA 48V INVERTER Features
  • Powerful Pure Sine Wave (PSW) Inverter/Charger
  • 13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
  • High efficiency design and Power Saving Mode to conserve energy
  • 8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
  • 4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
  • 8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
  • 15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
  • Battery DOD (Depth of Discharge) setting from 50%
  • Easy and straightforward installation
  • Designed to operate under harsh environment
  • DC Start and Automatic Self Diagnostic (ASD) function
  • Compatible with Linear and Non-Linear loads
  • Low DC Voltage home and office appliances support
  • Up to 120Amp charging current selectable from 0%-100%
  • Battery priority mode for preferred UPS configuration
 
Inverter Output
Model PT-INV-10KVA/9000W 48V-Color LED, Wall-H
Continuous Output Power 9000W
Surge Rating(20s) 24000W
Capable of Starting Electric Motor 8HP
Output Waveform Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency >88%(Peak)
Line Mode Efficiency >95%
Power Factor 0.9-1.0
Nominal Output Voltage rms  220-230-240Vac
Output Voltage Regulation ±10% RMS
Output Frequency 50± 0.3Hz/60± 0.3Hz
Short Circuit Protection Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time 10ms(Max)
THD < 10%
DC Input
Nominal Input Voltage 12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Alarm 10.5Vdc/11.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Trip 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High Voltage Alarm & Fault 16.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High DC Input Recovery 15.5Vdc
Low Battery voltage recover 15.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Idle Consumption-Search Mode < 25 W when Power Saver On
Charge
Input Voltage Range Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC
Input Frequency Range Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage Depends on battery type
Charger Breaker Rating 40A
Max Charge Rate 50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current) 4 step digital controlled progressive charge Battery types ( *2 for 24Vdc, *4 for 48Vdc)
Battery type Float Vdc
Gel U.S.A 13.7
A.G.M 1 13.4
A.G.M 2 13.7
Sealed Lead Acid 13.6
Gel Euro 13.8
Open Lead Acid 13.3
Calcium 13.6
De-sulphation 15.5 for 4hrs
Remote Control Yes. Optional
Bypass & Protection
Input Voltage Waveform Sine wave (Grid or Generator)
Nominal Voltage 220Vac
Low Voltage Trip 184V/140V±4%
Low Voltage re engage 194V/150V±4%
High Voltage Trip 253V/270V±4%
High Voltage re engage 243V/260V±4%
Max Input AC Voltage 280VAC
Nominal Input Frequency 50Hz or 60Hz (Auto detect)
Low Freq Trip Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection Circuit breaker
Bypass breaker rating 63A
Transfer switch rating 80amp for UL
Max bypass current 80amp
Mechanical Specification
Mounting Wall mount
Inverter Dimensions(L*W*H) 588*415*200mm
Inverter Weight 66KG
Shipping Dimensions(L*W*H) 750x520x310mm
Shipping Weight 68KG
Display Status LEDs / Status LEDs+LCD
Standard Warranty 1 Year
Key Features:
  • 450V/3000W MPPT Technology: Maximize solar energy utilization with our advanced Maximum Power Point Tracking (MPPT) feature, delivering optimal performance and efficiency.
  • High Charging Current: Enjoy faster battery charging with a high charging current capability, enhancing energy storage and reliability.
  • Wide PV Input Voltage Range: Accommodate a broad range of solar panel configurations with a high input voltage range.
  • Cost-Effective Solution: Achieve superior performance at an affordable price, making it a smart investment for your energy needs.
  • Pure Sine Wave Output: Benefit from clean and stable power for sensitive electronic devices, ensuring reliable operation and longevity.
  • Cold Start Function: Power up even in low-light conditions with the cold start feature, making it ideal for diverse environments.
  • Optional Anti-Dusk Kit: Enhance durability and performance with an optional anti-dusk kit, protecting against dust and debris.
  • Comprehensive LCD Display: Easily monitor and configure settings with a clear and user-friendly LCD display.
  • Smart Battery Charger Design: Optimize battery performance with a sophisticated charger design, ensuring efficient energy use and extended battery life.
  • Auto Restart Function: Experience automatic recovery and uninterrupted power when AC power is restored.
  • Overload and Short Circuit Protection: Safeguard your system with built-in protection features against overloads and short circuits.
  • Compatible with Mains Voltage or Generator Power: Enjoy flexibility in power sources, compatible with both mains electricity and generator power.
  • Configurable AC/Solar Input Priority: Customize your energy priorities via LCD settings to suit your specific needs.
  • Selectable Input Voltage Range: Adapt to various home appliances and personal computers with adjustable input voltage settings.
Whether you’re upgrading your home energy system or seeking a reliable power solution, the 3KW/24V Hybrid Inverter offers unmatched efficiency, flexibility, and performance.

3KW/24V Hybrid Inverter (3000W-MPPT) Features

  • Operates with or without battery
  • 450V/3000W MPPT
  • High Charging Current
  • High PV input voltage range
  • Cost effective Inverter
  • Output power factor 1
  • Wide DC input range
  • Cold start function
  • Optional anti-dusk kit
  • Inbuilt MPPT Solar Charger
  • Pure Sine wave Solar Inverter
  • Selectable high charging current
  • Auto restart while AC is recovering
  • Overload and short circuit protection
  • Compatible to mains voltage or generator power
  • Configurable AC/Solar input priority via LCD setting
  • Smart battery charger design for optimized battery performance
  • Comprehensive LCD Display: For monitoring and configuration
  • Selectable input voltage range for home appliances and personal computers
4KVA-24V Pure Sine Wave Inverter - Wall Mount-H + AC/DC Cables PRAG H-Series Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak conversion efficiency of 88%. It is packed with unique features and it is one of the most advanced inverter/chargers in the market today. It features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment. PRAG H-Series Inverter is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer. Features
  • Easy to Install & Easy to Operate & Easy to Solve
  • Designed to Operate under Harsh Environment
  • DC Start & Automatic Self-Diagnostic Function
  • Powerful Charge Rate Up to 120Amp (depending on model), Selectable From 0%-100%
  • High Efficiency Design & “Power Saving Mode” to Conserve Energy
  • 8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Batteries
  • 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
  • 8 ms Typical Transfer Time Between Utility & Battery, Guarantees Power Continuity
  • 15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
  • Battery DOD(Depth of Discharge) setting from 50% to 100%.
  • SNMP remote monitoring (available as an option)
Brand iPower
Warranty Period 1 Year
MODEL iPowerxMaX3000-24
RatedPower 3000VA/3000W
INPUT
Voltage 230VAC
SelectableVoltageRange 170-280VAC(ForPersonalComputers); 90- 280 VAC(ForHomeAppliances)
FrequencyRange 50Hz/60Hz(Autosensing)
OUTPUT
ACVoltageRegulation(Batt.Mode) 230VAC±5%
SurgePower 6000VA
Efficiency(Peak) 90%~93%
TransferTime 10ms(ForPersonalComputers);20ms(For HomeAppliances)
Waveform Puresinewave
BATTERY
BatteryVoltage 24VDC
FloatingChargeVoltage 27VDC
OverchargeProtection 32VDC
SOLARCHARGER&ACCHARGER
SolarChargerType MPPT
MaximumPVArrayOpenCircuitVoltage 450VDC
MaximumPVArrayPower 3000W
MPPRange@OperatingVoltage 60-400VDC
MaximumSolarChargeCurrent 80A
MaximumAC ChargeCurrent 80A
MaximumChargeCurrent 80A
PHYSICAL
Dimension,DxWxH(mm) 100x288x390
NetWeight(kgs) 8.0
CommunicationInterface RS232
ENVIRONMENT
Humidity 5%to95%RelativeHumidity(Non- condensing)
OperatingTemperature -10°Cto50°C
StorageTemperature -15°Cto60°C
Modular/Parallel Operation: up to 6 units of this inverter can be combined to give a maximum of 43.2KW Advanced Inverter Built In MPPT Solar Charge Controller:  String/High PV (450V DC) Battery independent design – can operate without battery connected Selectable input voltage range for home appliances and personal computers Lithium Battery Charging Compatible Selectable high power charging current Customizable status LED bar with RGB lights Built-in Wi-Fi for mobile monitoring (Android/iOS App is available) Supports USB On-the-Go function Reserved communication port for BMS (RS485, CAN-BUS or RS2320 Replaceable fan design for ease of maintenance Configurable AC/PV output usage timer and prioritization Compatible to Utility mains voltage or generator power Built-in anti-dust kit Optional DC output for DC fan, LED bulb, router and so onThe iPowerPlus 3KVA/24V runs on a pure sine wave technology. It is well shielded from short-circuits and overload complications with automated tripping off when the batteries get to the threshold. It is a hybrid system with an in-built solar charge controller that has a complementary in-built cooling system comprising of heat zinc and fans. Other features The iPowerPlus 3KVA/24V is compatible with both mains voltage and generator power. It interfaces with the utility electricity in the home to provide power through solar panels and seamlessly resolve any power interruptions that may occur. It includes other features such as:
  • A smart battery charger that optimizes battery performance
  • Selectable charging current depending on the applications
  • Selectable input voltage range
  • Configurable solar/AC input priority
  • Auto restart while AC recovers
  • A perfect alarming system
We must point out that the transition from mains to generator and vice versa is very seamless and usually occurs without you even noticing it except you are close by the inverter.
WeightN/AN/AN/A8 kgN/A10 kg
DimensionsN/AN/AN/A100 × 288 × 390 cmN/AN/A
Additional information
Weight 8 kg
Dimensions 100 × 288 × 390 cm
Weight 10 kg
Sold000000
Shipping
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Add to cart
Click outside to hide the comparison bar
Compare