Don’t miss out great discount.

Huawei 3KVA Power Module Inverter + 5kWh Battery

4,500,000.00
29 people are viewing this right now
Estimated Delivery:
14 - 21 Oct, 2025
Trust Badge
Guaranteed safe & secure checkout

Product details

The Huawei Power Module Inverter comes with one (5kwh battery) is an advanced, high-performance solution designed for efficient energy management in residential, commercial, and industrial applications. Engineered with versatility, reliability, and durability in mind, this energy storage system integrates seamlessly with renewable energy sources, offering robust energy storage, backup power, and grid independence. Its modular design and flexible installation options ensure adaptability to diverse needs while maintaining optimal performance.

Basic Parameters
Dimensions (W * H * D)
Single power module: 700 mm x 246 mm x 152 mm
Single battery module: 700mm x 390 mm x 158 mm
Base (mandatory for floor installation): 700 mm x 65 mm x 147 mm
Base (mandatory for wall-mounted installation): 643 mm x 110 mm x 176 mm
Weight Approx. 17 kg for a single power module
Approx.50 kg for a single energy storage module
Installation Mode Wall-mounted/ground-mounted
Degree of protection IP66
AC input
Input voltage 200/208/220/230/240V AC
Input current Max. 30 A
Frequency 50/60Hz
Maximum bypass input power 6kW
Lightning protection Differential mode: 3KA; common mode (two-wire pair PE): 5KA; 8/20 μs
SOLAR.HUAWEI.COM/EU/
1. Test conditions: 100% depth of discharge (DoD), 0.2C rate charge & discharge at 25℃, at the beginning of life. If no PV modules are installed or the system has not detected sunlight for at least 24 hours, the minimum end of
discharge SOC is 15%.
2. The weight of the battery module is subject to the actual product, with a tolerance of ±3%
3. Refer to battery warranty letter for conditional application.
4. Improper storage system installation may compromise product warranty and operation safety. Please follow the user manual during the installation, use, and maintenance of the storage system.
5. Noise Level(Typical):<29 dB(A) @1m, 30℃, Power On and Run Stably for 2 Hours
PV input
MPPT voltage range 90-420V DC
Maximum input capacity of the MPPT 5.5kWp
PV string quantity 2 strings
Number of MPPT channels 1 channel
Maximum input current for one string 12.5A
Maximum short circuit current for one string 18A
Lightning protection Complies with EN/IEC 61643-11 TYPE II
AC output
Output voltage system Single-phase 200/208/220/230/240V AC. The default value is 220V AC
Output frequency 50/60 Hz. The default value is 50 Hz.
Maximum output current 30A
Output power 6kVA/5kW
Power factor 0.8
Overload capacity
102% ≤ Load ≤ 125% 30s
125% < Load ≤ 150% 10s
>150%/short circuit 0.3s
Battery parameters
Rated capacity 5 kWh per module
Maximum capacity
Single system scenario: max. support 6 pcs batteries, 5 kW output (5Kw@30kWh)
Parallel system scenarios: max. 3 power modules can be paralleled. Each power module supports max. 3
batteries (15Kw@45kWh)
Maximum output/input power 2.5 kW per module
AC parallel box
Dimensions (W * H * D) 350 mm x 450 mm x 150 mm
Weight Approx. 12 kg
Input voltage 200/208/220/230/240 V AC. The default value is 220 V AC.
Input current Maximum 90A
Output voltage 200/208/220/230/240 V AC. The default value is 220 V AC.
Output current Max. 90A
Cable outlet mode Bottom in and bottom out
Installation Mode Wall-mounted or pole-mounted installation
Degree of protection IP55
Environmental parameters
Operating temperature 0°C to 45°C (without +1120w/m^2 solar radiation)
Transport temperature – 40°C -+ 70°C
Storage temperature – 40°C -+ 70°C
Relative humidity 5%-95% (RH)
Altitude Requirements 0~4000m (The operating temperature decreases by 1°C per 200m when the altitude is 2000 m to 4000

Quick Comparison

Huawei 3KVA Power Module Inverter + 5kWh Battery removePrag 5kw Adv Modular Solar Inverter-VT removePrag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT removePrag 3kw Premium Solar Inverter-VT removeMercury 1.2Kva/740Kw 12VDC, Transformerless, Modified Sinewave Inverter removeiPowerplus 3KVA/24V Inverter remove
NameHuawei 3KVA Power Module Inverter + 5kWh Battery removePrag 5kw Adv Modular Solar Inverter-VT removePrag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VT removePrag 3kw Premium Solar Inverter-VT removeMercury 1.2Kva/740Kw 12VDC, Transformerless, Modified Sinewave Inverter removeiPowerplus 3KVA/24V Inverter remove
ImageHuawei 3KVA Power Module Inverter + 5kWh BatteryPrag 5kw Adv Modular Solar Inverter-VTPrag 10KVA /48V Advance Pure Sinewave Inverter-Wall Mount VTPrag 3kw Premium Solar Inverter-VTMercury 1.2Kva/740Kw 12VDC, Transformerless, Modified Sinewave InverteriPowerplus 3KVA/24V Inverter
SKU
Rating
Price
4,500,000.00
1,560,000.00
2,700,000.00
710,000.00
173,000.00
Original price was: ₦414,000.00.Current price is: ₦400,000.00.
Save 3%
Stock
20 in stock
20 in stock
Availability20 in stock20 in stock
Add to cart

Description

Key Features

  1. Compact and Modular Design
  2. Superior Energy Storage
  3. High Power Output
  4. Solar and Grid Integration
  5. Durability and Safety
  6. Silent Operation
  7. Environmentally Resilient
  8. Energy Efficiency
  9. Comprehensive Installation Options

The Huawei Energy Storage System offers a reliable, scalable, and eco-friendly solution to meet diverse energy needs, ensuring consistent power delivery and sustainable energy management. Whether for residential backup, commercial energy optimization, or renewable energy integration, this system delivers unparalleled efficiency and performance.

Inverter Output Model   5K-48 Power Rating     5000W Parallel Capability            up to 9 units   INPUT Voltage 230 VAC Voltage Range   110 – 280 VAC Frequency Range             60/50 Hz (Auto Sensing) OUTPUT Efficiency (Peak)               93% at line mode, 90% at battery mode Surge Power      10000 VA for 5 sec Transfer Time    0 ms Waveform          Pure Sine Wave   BATTERY Battery Voltage 48 VDC Floating Charge Voltage 54 VDC Overcharging Protection               66 VDC   SOLAR CHARGER & AC CHARGER Solar Charger Type          MPPT Maximum PV Array Open Circuit Voltage               145 VDC Maximum PV Array Power           4000 W MPPT Range @ Operating Voltage            60 VDC ~115 VDC Maximum Solar Charge Current 80 A Maximum AC Charge Current     60 A Maximum Charge Current            140 A Maximum Efficiency       98% Standby Power Consumption     2 W   PHYSICAL Dimension, D x W x H (mm)         140 x 303 x 525 Net Weight (Kgs)              13.5 Communication Port       USB/RS232/RS485/Bluetooth/Dry-contact   OPERATING ENVIRONMENTPRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.Upgrade your energy system with the versatile and efficient 3KW/24V Hybrid Inverter (3000W-MPPT). Designed for both flexibility and reliability, this inverter seamlessly operates with or without a battery, ensuring uninterrupted power supply in diverse conditions.Model 1.2k Voltage 230VAC Capacity 1200VA/720W Voltage Range 170-280VAC (UPS Mode) 90-280 VAC (INV Mode) Voltage Regulation(Battery Mode) 230VAC +/-10% Transfer Time 20 ms Typical Waveform Modified Sine Wave Battery Voltage 12VDC Floating Charge Voltage 13.75VDC +-0.25 Charge Current 10/20A Dimension 330 x 227.8 x 92.5 Net Weight (Kgs) 2.6 Gross Weight (Kgs) 3.1
  • Hybrid System
  • 3KVA
ContentThe Huawei Power Module Inverter comes with one (5kwh battery) is an advanced, high-performance solution designed for efficient energy management in residential, commercial, and industrial applications. Engineered with versatility, reliability, and durability in mind, this energy storage system integrates seamlessly with renewable energy sources, offering robust energy storage, backup power, and grid independence. Its modular design and flexible installation options ensure adaptability to diverse needs while maintaining optimal performance. Basic Parameters Dimensions (W * H * D) Single power module: 700 mm x 246 mm x 152 mm Single battery module: 700mm x 390 mm x 158 mm Base (mandatory for floor installation): 700 mm x 65 mm x 147 mm Base (mandatory for wall-mounted installation): 643 mm x 110 mm x 176 mm Weight Approx. 17 kg for a single power module Approx.50 kg for a single energy storage module Installation Mode Wall-mounted/ground-mounted Degree of protection IP66 AC input Input voltage 200/208/220/230/240V AC Input current Max. 30 A Frequency 50/60Hz Maximum bypass input power 6kW Lightning protection Differential mode: 3KA; common mode (two-wire pair PE): 5KA; 8/20 μs SOLAR.HUAWEI.COM/EU/ 1. Test conditions: 100% depth of discharge (DoD), 0.2C rate charge & discharge at 25℃, at the beginning of life. If no PV modules are installed or the system has not detected sunlight for at least 24 hours, the minimum end of discharge SOC is 15%. 2. The weight of the battery module is subject to the actual product, with a tolerance of ±3% 3. Refer to battery warranty letter for conditional application. 4. Improper storage system installation may compromise product warranty and operation safety. Please follow the user manual during the installation, use, and maintenance of the storage system. 5. Noise Level(Typical):<29 dB(A) @1m, 30℃, Power On and Run Stably for 2 Hours PV input MPPT voltage range 90-420V DC Maximum input capacity of the MPPT 5.5kWp PV string quantity 2 strings Number of MPPT channels 1 channel Maximum input current for one string 12.5A Maximum short circuit current for one string 18A Lightning protection Complies with EN/IEC 61643-11 TYPE II AC output Output voltage system Single-phase 200/208/220/230/240V AC. The default value is 220V AC Output frequency 50/60 Hz. The default value is 50 Hz. Maximum output current 30A Output power 6kVA/5kW Power factor 0.8 Overload capacity 102% ≤ Load ≤ 125% 30s 125% < Load ≤ 150% 10s >150%/short circuit 0.3s Battery parameters Rated capacity 5 kWh per module Maximum capacity Single system scenario: max. support 6 pcs batteries, 5 kW output (5Kw@30kWh) Parallel system scenarios: max. 3 power modules can be paralleled. Each power module supports max. 3 batteries (15Kw@45kWh) Maximum output/input power 2.5 kW per module AC parallel box Dimensions (W * H * D) 350 mm x 450 mm x 150 mm Weight Approx. 12 kg Input voltage 200/208/220/230/240 V AC. The default value is 220 V AC. Input current Maximum 90A Output voltage 200/208/220/230/240 V AC. The default value is 220 V AC. Output current Max. 90A Cable outlet mode Bottom in and bottom out Installation Mode Wall-mounted or pole-mounted installation Degree of protection IP55 Environmental parameters Operating temperature 0°C to 45°C (without +1120w/m^2 solar radiation) Transport temperature - 40°C -+ 70°C Storage temperature - 40°C -+ 70°C Relative humidity 5%-95% (RH) Altitude Requirements 0~4000m (The operating temperature decreases by 1°C per 200m when the altitude is 2000 m to 4000
  • Pure Sine wave Solar Inverter
  • Advanced Inverter
  • In-Built MPPT solar charge controller
  • Online UPS: Zero transfer time, perfect for critical devices such as Servers and ATMs
  • Modular/Parallel Operation: up to 9 units of this inverter can be combined to give a maximum of 45KW
  • Detachable LCD control module with multiple communications
  • Built-in Bluetooth for mobile monitoring (Android App is available)
  • Lithium Battery Charging Compatible
  • Supports USB On-the-Go function
  • Reserved communication port for BMS (RS485, CAN-BUS or RS232)
PRAG 10KVA 48V INVERTER W-EY (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today. PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame. PRAG 10KVA 48V INVERTER Features
  • Powerful Pure Sine Wave (PSW) Inverter/Charger
  • 13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
  • High efficiency design and Power Saving Mode to conserve energy
  • 8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
  • 4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
  • 8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
  • 15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
  • Battery DOD (Depth of Discharge) setting from 50%
  • Easy and straightforward installation
  • Designed to operate under harsh environment
  • DC Start and Automatic Self Diagnostic (ASD) function
  • Compatible with Linear and Non-Linear loads
  • Low DC Voltage home and office appliances support
  • Up to 120Amp charging current selectable from 0%-100%
  • Battery priority mode for preferred UPS configuration
 
Inverter Output
Model PT-INV-10KVA/9000W 48V-Color LED, Wall-H
Continuous Output Power 9000W
Surge Rating(20s) 24000W
Capable of Starting Electric Motor 8HP
Output Waveform Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency >88%(Peak)
Line Mode Efficiency >95%
Power Factor 0.9-1.0
Nominal Output Voltage rms  220-230-240Vac
Output Voltage Regulation ±10% RMS
Output Frequency 50± 0.3Hz/60± 0.3Hz
Short Circuit Protection Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time 10ms(Max)
THD < 10%
DC Input
Nominal Input Voltage 12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Alarm 10.5Vdc/11.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Low Battery Trip 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High Voltage Alarm & Fault 16.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
High DC Input Recovery 15.5Vdc
Low Battery voltage recover 15.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Idle Consumption-Search Mode < 25 W when Power Saver On
Charge
Input Voltage Range Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC
Input Frequency Range Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz
Output Voltage Depends on battery type
Charger Breaker Rating 40A
Max Charge Rate 50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
Over Charge Protection Shutdown 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current) 4 step digital controlled progressive charge Battery types ( *2 for 24Vdc, *4 for 48Vdc)
Battery type Float Vdc
Gel U.S.A 13.7
A.G.M 1 13.4
A.G.M 2 13.7
Sealed Lead Acid 13.6
Gel Euro 13.8
Open Lead Acid 13.3
Calcium 13.6
De-sulphation 15.5 for 4hrs
Remote Control Yes. Optional
Bypass & Protection
Input Voltage Waveform Sine wave (Grid or Generator)
Nominal Voltage 220Vac
Low Voltage Trip 184V/140V±4%
Low Voltage re engage 194V/150V±4%
High Voltage Trip 253V/270V±4%
High Voltage re engage 243V/260V±4%
Max Input AC Voltage 280VAC
Nominal Input Frequency 50Hz or 60Hz (Auto detect)
Low Freq Trip Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Wide:40±0.3Hz for 50Hz/60Hz
Low Freq re engage Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz Wide:42±0.3Hz for 50Hz/60Hz
High Freq Trip Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz Wide: 70±0.3Hz for 50Hz/60Hz
High Freq re engage Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz Wide: 68±0.3Hz for 50Hz/60Hz
Output Short circuit protection Circuit breaker
Bypass breaker rating 63A
Transfer switch rating 80amp for UL
Max bypass current 80amp
Mechanical Specification
Mounting Wall mount
Inverter Dimensions(L*W*H) 588*415*200mm
Inverter Weight 66KG
Shipping Dimensions(L*W*H) 750x520x310mm
Shipping Weight 68KG
Display Status LEDs / Status LEDs+LCD
Standard Warranty 1 Year
Key Features:
  • 450V/3000W MPPT Technology: Maximize solar energy utilization with our advanced Maximum Power Point Tracking (MPPT) feature, delivering optimal performance and efficiency.
  • High Charging Current: Enjoy faster battery charging with a high charging current capability, enhancing energy storage and reliability.
  • Wide PV Input Voltage Range: Accommodate a broad range of solar panel configurations with a high input voltage range.
  • Cost-Effective Solution: Achieve superior performance at an affordable price, making it a smart investment for your energy needs.
  • Pure Sine Wave Output: Benefit from clean and stable power for sensitive electronic devices, ensuring reliable operation and longevity.
  • Cold Start Function: Power up even in low-light conditions with the cold start feature, making it ideal for diverse environments.
  • Optional Anti-Dusk Kit: Enhance durability and performance with an optional anti-dusk kit, protecting against dust and debris.
  • Comprehensive LCD Display: Easily monitor and configure settings with a clear and user-friendly LCD display.
  • Smart Battery Charger Design: Optimize battery performance with a sophisticated charger design, ensuring efficient energy use and extended battery life.
  • Auto Restart Function: Experience automatic recovery and uninterrupted power when AC power is restored.
  • Overload and Short Circuit Protection: Safeguard your system with built-in protection features against overloads and short circuits.
  • Compatible with Mains Voltage or Generator Power: Enjoy flexibility in power sources, compatible with both mains electricity and generator power.
  • Configurable AC/Solar Input Priority: Customize your energy priorities via LCD settings to suit your specific needs.
  • Selectable Input Voltage Range: Adapt to various home appliances and personal computers with adjustable input voltage settings.
Whether you’re upgrading your home energy system or seeking a reliable power solution, the 3KW/24V Hybrid Inverter offers unmatched efficiency, flexibility, and performance.

3KW/24V Hybrid Inverter (3000W-MPPT) Features

  • Operates with or without battery
  • 450V/3000W MPPT
  • High Charging Current
  • High PV input voltage range
  • Cost effective Inverter
  • Output power factor 1
  • Wide DC input range
  • Cold start function
  • Optional anti-dusk kit
  • Inbuilt MPPT Solar Charger
  • Pure Sine wave Solar Inverter
  • Selectable high charging current
  • Auto restart while AC is recovering
  • Overload and short circuit protection
  • Compatible to mains voltage or generator power
  • Configurable AC/Solar input priority via LCD setting
  • Smart battery charger design for optimized battery performance
  • Comprehensive LCD Display: For monitoring and configuration
  • Selectable input voltage range for home appliances and personal computers
The re-engineered Mercury 1200VA (1.2kva) inverter, now comes with an LCD display to enable the user monitor the operating status of the equipment. Better still, this tough, hard-working, low cost inverter has been upgraded for better performance and more durability. You really get virtually everything you desire: good performance, extended durability, trusted technical support and best of all, low pricing! The Mercury Radiant modified sine wave inverters have remained in a class of their own, offering top performance at amazingly low pricing. Compared to other available inverter options, this is the best value inverter - costing so little and still delivering the power backup performance that users require. If you simply want to get the job done, at the best possible price, without worrying much about the waveform, these modified sine wave Mercury inverters are the perfect fit. They function well, are durable and are priced pretty low. For most domestic appliances, this class of inverters will meet your power supply objective, costing far less than the pure sine wave alternatives. NEW LCD DISPLAY to MONITOR PERFORMANCE Now you can easily keep a close eye on the performance of your equipment, with an LCD display to constantly show its operating status. In particular, you can easily see the level of your battery, helping you decide when to recharge your batteries without letting them get dangerously low. Very deep discharge is harmful to your batteries, shortening their lifespan. So, there's a big value in a display that helps you track your battery level. Other critical performance indices are also available to help you optimize the use of your inverter. TRUSTED PERFORMANCE, HANDY TECHNICAL SUPPORT The Mercury MSV inverter range offers a cheaper access to the use of inverters, enabling more households enjoy the extraordinary benefits of inverter use. Mercury Radiant inverters are in wide use in Nigeria, the result of their impressive performance, even at a low cost. Best of all, the available Kobian service centres, maintained across Nigeria by the manufacturer, ensure that your equipment is supported to keep it running. While there is a solid one year warranty with free maintenance, technical support remains readily available even after the warranty period. So, you can be sure to keep using your Mercury inverter far into the future. Little expenditure, huge value! 12VDC BATTERY VOLTAGE The 1200VA (1.2kva) Mercury inverter is a 12V system. Only one 12V battery is required to run this inverter. The battery capacity would be your choice (depending on intended function), but larger capacity batteries of 200Ah/12V and higher would be preferred for better energy storage capacity. While lower battery capacity of 12V will still operate the inverter, your backup time could be short, with the added adverse impact on battery durability. Batteries that get run down fast and deep (due to inadequate capacity) are likely to die faster than their ideal lifespan. RATED CAPACITY The 1.2kva Mercury inverter is rated at 720W. To enjoy reasonable backup performance from this inverter, however, you should aim at much lower total load. At 100% capacity load, your inverter will deliver a very short backup performance. To enjoy longer backup, you will have to scale down, knowing that the lower your load gets, the longer the inverter runs on a battery charge. TECHNICAL SPECIFICATIONS Here are the specs of the 1200VA Mercury inverter: Model 1.2k Voltage 230VAC Capacity 1200VA/720W Voltage Range 170-280VAC (UPS Mode) 90-280 VAC (INV Mode) Voltage Regulation(Battery Mode) 230VAC +/-10% Transfer Time 20 ms Typical Waveform Modified Sine Wave Battery Voltage 12VDC Floating Charge Voltage 13.75VDC +-0.25 Charge Current 10/20A Dimension 330 x 227.8 x 92.5 Net Weight (Kgs) 2.6 Gross Weight (Kgs) 3.1The iPowerPlus 3KVA/24V runs on a pure sine wave technology. It is well shielded from short-circuits and overload complications with automated tripping off when the batteries get to the threshold. It is a hybrid system with an in-built solar charge controller that has a complementary in-built cooling system comprising of heat zinc and fans. Other features The iPowerPlus 3KVA/24V is compatible with both mains voltage and generator power. It interfaces with the utility electricity in the home to provide power through solar panels and seamlessly resolve any power interruptions that may occur. It includes other features such as:
  • A smart battery charger that optimizes battery performance
  • Selectable charging current depending on the applications
  • Selectable input voltage range
  • Configurable solar/AC input priority
  • Auto restart while AC recovers
  • A perfect alarming system
We must point out that the transition from mains to generator and vice versa is very seamless and usually occurs without you even noticing it except you are close by the inverter.
WeightN/AN/AN/AN/A3.1 kg10 kg
DimensionsN/AN/AN/AN/A330 × 227.8 × 92.5 cmN/A
Additional information
Weight 3.1 kg
Dimensions 330 × 227.8 × 92.5 cm
Weight 10 kg
Sold000000
Shipping
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Add to cart
Click outside to hide the comparison bar
Compare