“Mercury Maverick 1550va UPS” has been added to your cart. View cart

PRAG 10KVA 100-250V Servo Voltage Stabilizer

Name: PRAG 10KVA 100-250V Servo Voltage Stabilizer
Brand: Prag
SKU: 23358
Availability: InStock

Add to wishlist

₦545,000.00

(0 reviews)

21 people are viewing this right now

Estimated Delivery:

16 - 23 Oct, 2025

Guaranteed safe & secure checkout

Product details

The compact and lightweight design of this stabilizer allows for easy installation without compromising on performance. It features a reliable and rapid voltage regulation speed, which is crucial for protecting your valuable appliances from voltage fluctuations that can cause damage or reduced efficiency. This stabilizer is ideal for a wide range of applications, including small office equipment, refrigerators, electric fans, TVs, computers, and various other household appliances.

Key Features:

Model: 10KVA
Input Voltage: AC 100V-260V / 130V-250V
Output Voltage: AC 220V ±10%, 50/60Hz
Delay Time: Short Delay: 3-5 seconds, Long Delay: 3-7 minutes
Protection Mechanisms: Over Voltage (246V ±4V), Overload, High Temperature, Short Circuit
Power Capacity: 5000VA
Product Dimensions: 45 cm x 31.5 cm x 18.5 cm
Packing Dimensions: 51 cm x 37.5 cm x 25 cm
Net Weight: 24.1 kg
Gross Weight: 25.3 kg

Additional Benefits

Whether you’re looking to stabilize the power supply in a busy office or protect sensitive electronic equipment at home, the 10KVA SERVO 100-250V Wall Voltage Stabilizer is your ideal solution. Enjoy peace of mind knowing that your electrical devices are well-protected, allowing you to focus on what matters most.

Upgrade your home or office with this high-performance stabilizer today and experience the difference in your electrical system’s reliability and efficiency. The 10KVA SERVO Wall Voltage Stabilizer is where convenience meets performance, delivering essential protection for all your electrical needs.

Quick Comparison

PRAG 10KVA 100-250V Servo Voltage Stabilizer remove Mercury Elite Pro 2000VA UPS remove Vertiv Liebert itON 1500VA E 230V IEC-IEC UPS remove Mercury 10KVA AVR - 1 Phase - Servo Stabilizer remove APC EASY UPS BV 650VA remove Mercury 15KVA AVR, 1 Phase, Servo Type Stabilizer remove

Name PRAG 10KVA 100-250V Servo Voltage Stabilizer remove Mercury Elite Pro 2000VA UPS remove Vertiv Liebert itON 1500VA E 230V IEC-IEC UPS remove Mercury 10KVA AVR - 1 Phase - Servo Stabilizer remove APC EASY UPS BV 650VA remove Mercury 15KVA AVR, 1 Phase, Servo Type Stabilizer remove

Image

SKU

Rating

Price

₦545,000.00

₦200,000.00

₦148,000.00

₦485,000.00

₦108,000.00

₦675,000.00

Stock

20 in stock

Out of stock

20 in stock

Availability 20 in stock Out of stock 20 in stock 20 in stock

Add to cart

Description

The 10KVA SERVO 100-250V Wall Voltage Stabilizer ensures your electrical devices operate safely and efficiently. Designed for both wall and desktop installation, this compact and lightweight stabilizer features a user-friendly LED digital display for easy monitoring.

Reliable Protection: Safeguards appliances from voltage fluctuations, extending their lifespan.
Fast Regulation: Rapid response to voltage changes ensures consistent performance.
Versatile Application: Suitable for small office equipment, refrigerators, TVs, and more.
Easy Installation: Compact design allows for hassle-free setup in various environments.

Upgrade your power stability with the 10KVA SERVO Voltage Stabilizer and experience peace of mind!

Rating input voltage 2000 VA / 1200 W Rating input frequency 60/50Hz (auto sensing) Input phase Single phase Input socket With Fuse Rating output voltage (V) 220 Waveform Battery mode (simulated sine wave), AC Voltage Regulation ±10% (Battery mode) Rear output socket 4 x Universal - Battery backup Waveform Simulated Sine Wave (Battery mode) Line Mode Synchronize with the utility Rating frequency 60Hz or 50 Hz ± 1 Hz Battery Mode Yellow flashing Short circuit protection Line Mode Fuse & Firmware protection Short circuit protection Battery Mode Firmware Protection Overload protection Line Mode 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. Indicators AC mode Green Lighting Indicators Battery Mode Yellow Flashing Indicators Fault Red Lighting Alarm Battery Mode Sounding every 10 Seconds Alarm Low Battery Sounding every Second Alarm Overload Sounding every 0.5 second Alarm Fault Continuously sounding Full Protection Overload, discharge, and Overcharge protection Communication Interface Optional RS232/RJ11

Automatic voltage regulator (AVR with boost and trim)
Compact size
Light weight
Easy operation
Overload protection and alarm
Auto re-start with AC recovery
Fast charging
Cold start function

Mercury 10KVA AVR - 1 Phase - Servo Stabilizer (Input voltage: 100V-255V AC

Power: 10KVA
Technology: Relay Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 220V ± 10%
Phase: Single
Compact Design – Sleek & handy. Get the Mercury 10kVA AVR for that all-important voltage protection to your equipment. With the Mercury 10kVA AVR, you can support heavy-duty equipment or a number of appliances at a stretch.Power fluctuations are common and for anyone using power generators (and who doesn’t?), the risk of voltage fluctuations is even higher. What you must know, also, is that voltage fluctuations can damage your important appliances, causing you financial loss.Automatic voltage regulators, AVR, provide the voltage stabilization that will protect your sensitive equipment. AVRs, commonly called stabilizers, are designed to stabilize the voltage. That not only helps your equipment to function optimally but protects them from damage. The AVR will take a wide input voltage range and output a regulated voltage range that is safe for your equipment.Having an AVR that delivers the expected result is a different matter, though. All AVRs are not made equal. And you need an AVR that does an effective job of providing the voltage stabilization that is imperative to keep your valued equipment safe.

That is where Mercury brand AVRs come in. Mercury AVRs are built to high standards and offer efficient voltage regulation function. With Mercury AVR, you get the result that you expect, with your equipment enjoying that all-important protection from voltage-induced damage. These Mercury AVRs also deliver the durability users expect, serving you for years on end. This is a quality stabilizer, suitable for home appliances and office equipment FEATURES:

Small Footprint
Wide Application
High cost effective & High power density
Automatic Control Circuit
High Quality Components
Ring Transformer Structure
Minimum Magnetic Leakage
Convenient Daily Maintenance
Stable Performance and Reliability
No Additional Distortion of Output Waveform
High Precision Auto Voltage Regulator Power Supply
Multi-layer Structure Carbon Brush with Long Service Time
High Adaptability to all kinds of non linear loads such as Inductive load and Capacitive load

Output power capacity: 375watts / 650va Max configurable power (watts): 375watts / 650va Nominal output voltage: 230v Output frequency (not synced): 50/60 hz +/-1 hz Topology: line interactive Waveform type: stepped approximation to a sinewave Output connections: (6) iec 320 c13 (battery backup) Transfer time: 6ms typical : 10ms maximum Nominal input voltage: 230v Input frequency: 50/60 hz +/- 5 hz (auto sensing) Input connections: iec-320 c14 Cord length: 1.52meters Number of power cords: 1 Battery type: maintenance-free sealed lead-acid battery with suspended electrolyte: leakproof Expected battery life (years): 3 - 5 Efficiency: Communications & management: control panel LED status display with on line : on battery

Power: 15KVA
Technology: Relay Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 220V ± 10%
Phase: Single

Content

Ensure the safety and efficiency of your electrical devices with the 10KVA SERVO 100-250V Wall Voltage Stabilizer. This advanced 220V fully automatic voltage regulator is designed for both desktop and wall-mounted installations, offering flexibility in various settings such as homes, offices, and industrial environments. With a user-friendly LED digital display, you can effortlessly monitor the voltage levels, ensuring that your equipment operates within safe limits. The compact and lightweight design of this stabilizer allows for easy installation without compromising on performance. It features a reliable and rapid voltage regulation speed, which is crucial for protecting your valuable appliances from voltage fluctuations that can cause damage or reduced efficiency. This stabilizer is ideal for a wide range of applications, including small office equipment, refrigerators, electric fans, TVs, computers, and various other household appliances.

Key Features:

Model: 10KVA
Input Voltage: AC 100V-260V / 130V-250V
Output Voltage: AC 220V ±10%, 50/60Hz
Delay Time: Short Delay: 3-5 seconds, Long Delay: 3-7 minutes
Protection Mechanisms: Over Voltage (246V ±4V), Overload, High Temperature, Short Circuit
Power Capacity: 5000VA
Product Dimensions: 45 cm x 31.5 cm x 18.5 cm
Packing Dimensions: 51 cm x 37.5 cm x 25 cm
Net Weight: 24.1 kg
Gross Weight: 25.3 kg

Additional Benefits

This voltage stabilizer not only safeguards your devices but also enhances their lifespan, ultimately saving you money on repairs and replacements. Its robust design and advanced protection mechanisms ensure that it can handle demanding situations, such as sudden power surges or dips. Whether you’re looking to stabilize the power supply in a busy office or protect sensitive electronic equipment at home, the 10KVA SERVO 100-250V Wall Voltage Stabilizer is your ideal solution. Enjoy peace of mind knowing that your electrical devices are well-protected, allowing you to focus on what matters most. Upgrade your home or office with this high-performance stabilizer today and experience the difference in your electrical system’s reliability and efficiency. The 10KVA SERVO Wall Voltage Stabilizer is where convenience meets performance, delivering essential protection for all your electrical needs.

MERCURY Line Interactive UPS (2000VA) - Elite 2000 ProWide input voltage rangeCompatible with generatorsOverload protectionShort circuit protectionBuilt-in AVRBattery deep discharge protection & overcharge protectionRating input voltage: 2000 VA / 1200 WRating input frequency: 60/50Hz (auto sensing)Input phase: Single phaseInput socket: With FuseCold Start (0 to 100% load): Press the ON/OFF SwitchInput Range (220V): 140-300Rating output (VA): 2000Rating output (W): 1200Power factor: 0.6Rating output voltage (V): 220Waveform: Battery mode (simulated sine wave), AC mode (sine wave)AC Voltage Regulation: ±10% (Battery mode)Rear output socket: 4 x Universal - Battery backupWaveform: Simulated Sine Wave (Battery mode)Line Mode: Synchronize with the utilityRating frequency: 60Hz or 50 Hz ± 1 HzBattery Mode: Yellow flashingShort circuit protection Line Mode: Fuse & Firmware protectionShort circuit protection Battery Mode: Firmware ProtectionOverload protection Line Mode: 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately.Overload protection Battery Mode: 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediatelyIndicators AC mode: Green LightingIndicators Battery Mode: Yellow FlashingIndicators Fault: Red LightingAlarm Battery Mode: Sounding every 10 SecondsAlarm Low Battery: Sounding every SecondAlarm Overload: Sounding every 0.5 secondAlarm Fault: Continuously soundingFull Protection: Overload, discharge, and Overcharge protectionTransfer Time: Typical 2-6ms, 10ms max.Transfer Time: Typical 2-6ms, 10ms max.Communication Interface: Optional RS232/RJ11Battery and runtime rating: 2 X 12V/9AHRecharge time – Typical: 6-8 hours recover to 90% capacityCharge current: About 1A at normal mode Mercury Elite 2000 Pro Line Interactive UPS provides a relatively robust capacity for power backup to meet office as well as domestic power backup demands. With the Mercury Elite 2000 you not only get power backup for your equipment but also enjoy solid protection for those appliances. The built-in AVR function of the Elite 2000 Pro means dangerous power fluctuations won't easily make mincemeat of your equipment.

The Liebert itON 1500 VA is a reliable line interactive ups designed to protect desktops and standalone computing equipment. The Liebert itON comes with an automatic voltage regulator (AVR) to provide flexibility and reliability to computers and other sensitive electronic equipment. With its compact design and easy –to use controls, the Liebert itON offer sufficient autonomy to safely back up current tasks before shutting down the system. LI32141CT21 is ideally suited for the following equipment:

Desktop PCs
Professional workstations
Small routers, bridges, and hubs
Point-of-sale terminals
Other sensitive electronics

Features

Equipment with boost and buck AVR to stabilize the input voltage
Microprocessor control guarantees high reliability
Provides AC overload protection
Auto-restart with AC recover
Compact size, lightweight
Fast charging
Off mode charging
Cold start function
Overload protection and alarm
USB communication port for monitoring and shutdown software (UX models only)

Top Benefits

Smart RS232/USB interface for power management
Excellent microprocessor control guarantees high reliability
AVR Boost and buck for voltage stabilization
Auto restart while AC is recovering
Simulated sine wave
Auto charging at Off-mode
Cold start function
Generator compatible

Key Specifications CAPACITY 1500 VA/900 Watt. INPUT

Voltage 220/230 VAC
INPUT Voltage Range 140-300 VAC
Frequency Range 50 Hz

OUTPUT

AC Voltage Regulation (Batt. Mode) ±10%
Frequency Range (Batt. Mode) 50 Hz ±1 Hz
Transfer Time Typical 2-6 ms
Waveform (Batt. Mode) Simulated Sine Wave
Overload 110% +/-10% Shutdown after 5 mins

BATTERY

Battery Type & Number 12 V/7 Ah x 2
Typical Recharge Time 6-8 hours up to 90% capacity

TRANSFER TIME Minimum line break for Typical 4-8 msec transfer to battery

" alt="Mercury 10KVA AVR 1 Phase Servo Stabilizer" width="500" height="500" data-src="https://www.digitaldirectng.com/wp-content/uploads/2023/04/Mercury-10KVA-AVR-1-Phase-Servo-Stabilizer.jpg" />

Mercury 10KVA AVR – 1 Phase – Servo Stabilizer

Mercury 10KVA AVR - 1 Phase - Servo Stabilizer (Input voltage: 100V-255V AC

Power: 10KVA
Technology: Relay Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 220V ± 10%
Phase: Single
Compact Design – Sleek & handy. Get the Mercury 10kVA AVR for that all-important voltage protection to your equipment. With the Mercury 10kVA AVR, you can support heavy-duty equipment or a number of appliances at a stretch.Power fluctuations are common and for anyone using power generators (and who doesn’t?), the risk of voltage fluctuations is even higher. What you must know, also, is that voltage fluctuations can damage your important appliances, causing you financial loss.Automatic voltage regulators, AVR, provide the voltage stabilization that will protect your sensitive equipment. AVRs, commonly called stabilizers, are designed to stabilize the voltage. That not only helps your equipment to function optimally but protects them from damage. The AVR will take a wide input voltage range and output a regulated voltage range that is safe for your equipment.Having an AVR that delivers the expected result is a different matter, though. All AVRs are not made equal. And you need an AVR that does an effective job of providing the voltage stabilization that is imperative to keep your valued equipment safe.

Small Footprint
Wide Application
High cost effective & High power density
Automatic Control Circuit
High Quality Components
Ring Transformer Structure
Minimum Magnetic Leakage
Convenient Daily Maintenance
Stable Performance and Reliability
No Additional Distortion of Output Waveform
High Precision Auto Voltage Regulator Power Supply
Multi-layer Structure Carbon Brush with Long Service Time
High Adaptability to all kinds of non linear loads such as Inductive load and Capacitive load

APC EASY UPS BV 650VA, AVR, Universal Outlet, 230V

Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers.

Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

Provides early-warning fault analysis on batteries, enabling timely preventive maintenance

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Provides temporary battery power when the utility power is out.

Protect equipment with input transformer blocks without blocking access to other receptacles.

The slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Back up and protect your hardware and data during power outages, surges and spikes.

Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.

Provides notification of changing utility power and UPS power conditions

Provide easy-to-read status of the unit and utility power conditions.

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Description: Mercury Stabilizer 15KVA AVR|1 Phase Servo Type MER-ZTY15

Input voltage: 100V-255V AC
Power: 15KVA
Technology: Relay Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 220V ± 10%
Phase: Single

Compact Design – Sleek & handy Get the Mercury 15kVA AVR servo stabilizer for that all-important voltage protection to your equipment. With the Mercury 15kVA AVR, you can support heavy-duty equipment or a number of appliances at a stretch. Power fluctuations are common and for anyone using power generators (and who doesn’t?), the risk of voltage fluctuations is even higher. What you must know, also, is that voltage fluctuations can damage your important appliances, causing you financial loss. Automatic voltage regulators, AVR, provide the voltage stabilization that will protect your sensitive equipment. AVRs, commonly called stabilizers, are designed to stabilize the voltage. That not only helps your equipment to function optimally but protects them from damage. The AVR will take a wide input voltage range and output a regulated voltage range that is safe for your equipment. Having an AVR that delivers the expected result is a different matter, though. All AVRs are not made equal. And you need an AVR that does an effective job of providing the voltage stabilization that is imperative to keep your valued equipment safe.

Weight N/A 3 kg 5 kg 20 kg 0.2 kg 60 kg

Dimensions N/A N/A N/A N/A N/A N/A

Additional information

Weight	3 kg

Weight	5 kg

Weight	20 kg

Weight	0.2 kg

Weight	60 kg

Sold 0 0 0 0 0 0

Shipping

Subtotal	₦228,000.00
Shipping	Enter your address to view shipping options.
Total	₦228,000.00

PRAG 10KVA 100-250V Servo Voltage Stabilizer

Product details

Key Features:

Additional Benefits

Shipping and Returns

Prag

Rating & Review

Question & Answer

Quick Comparison

Key Features:

Additional Benefits

Mercury 10KVA AVR – 1 Phase – Servo Stabilizer

Mercury 10KVA AVR – 1 Phase – Servo Stabilizer

PRAG 200KVA 3-Phase Servo Voltage Stabilizer (304-456V)

Mercury 2KVA Digital Stabilizer

APC EASY UPS BV 1000VA

Mercury 20KVA AVR 1-P Servo Type Stabilizer

PRAG 10KVA 100-250V Servo Voltage Stabilizer

Product details

Key Features:

Additional Benefits

Shipping and Returns

Prag

Rating & Review

Question & Answer

Quick Comparison

Key Features:

Additional Benefits

Mercury 10KVA AVR – 1 Phase – Servo Stabilizer

Related products

Mercury 10KVA AVR – 1 Phase – Servo Stabilizer

PRAG 200KVA 3-Phase Servo Voltage Stabilizer (304-456V)

Mercury 2KVA Digital Stabilizer

APC EASY UPS BV 1000VA

Mercury 20KVA AVR 1-P Servo Type Stabilizer

Shopping Cart